And so it begins.... (My adventures into Alox!)
-
@Heywood Floyd said:
Not sure if WWW meant this but would a, dare I say this here ... lol, a Leatherman eg Charge type solution work ie a transverse nodule or knick towards the pivot on the tools body suffice? More specifically like the bit holder tool, or flat screwdriver, scissors etc.

That is exactly what I meant!! I was also surfing through a Juice related thread so it came to mind immediately.
BTW that is a beautiful piece of Charge!!
That does have a rugged looking appeal to it eh... :D
-
@Heywood Floyd said:
Not sure if WWW meant this but would a, dare I say this here ... lol, a Leatherman eg Charge type solution work ie a transverse nodule or knick towards the pivot on the tools body suffice? More specifically like the bit holder tool, or flat screwdriver, scissors etc.
That is exactly what I meant!! I was also surfing through a Juice related thread so it came to mind immediately.
BTW that is a beautiful piece of Charge!!
That does have a rugged looking appeal to it eh... :D
Thanks for the kind words gents. It is a very easy mod. Essentially undo fasteners, re-arrange some tools and voila. Very unlike the skill, problem solving and patience amongst other qualities needed to make Syp007 type mods.
It does have some nice qualities that come along with the turf, like detachable pocket clip, frame locking CPM S-30V blade and the ability to easily changeout the tool sets from those remaining.
Its pretty compact but I've not found any useful solution for the ex plier head pivot space.
Syp007 please do tell us the solution you end up settling on to open the blade carrier.
Thanks also for your continued efforts in sharing the SAK modding journey. -
Dug out some 0.050" Ti today...



-
So do you plan to add a backspring?
Maybe a partial one like on the ct layer so you can have an awl or small blade.
-
Good work... I've been sitting on my hands about doing exactly that for a long time... it got knocked up a notch last week when I cut my finger when the blade on my Electrician folded on me.
I will be
with much interest...
and not just to see how you work out the geometry so I don't have to
-
Just a prototype for now but if it works I'll build it into a complete mod. Just going to try with a stock blade to start and Im rearranging the layers to the blade is in the front layer, and you will push with the right thumb to unlock. Opposite to how the current Vic 111mm works.
Im not sure if I will be able to have a tool with the blade or not. You know how the blade on a standard pioneer is bent so far it actually sits into the space of the liner.. well this needs a full liner so I dont think it will work. So it might be a solo spring blade layer, then the rest of the tools.
-
Hmm, very interesting! JR
-
Im thinking of a layout like this...
From back to front.
- Back scale
- Can opener / bottle opener layer
- Normal shaped Ti liner
- Scissors
- Locking liner
- Blade
- Front scale
-
-
Well my CNC retrofit kit came today finally! :D
Now I just have to figure out how to get it all installed, and pick up a driver board.. flood coolant tank and pump.. and a computer to run it.. learn CAD better.. :D
Hopeful by summer I'll get this all sorted or maybe sooner but its COLD in my shop right now.





The ball screws are nice and smooth, BIG upgrade from the stock lead screws. Apparently I can even get slightly larger balls and repack the nut for even more precision,... but im not at the advanced stage yet. I'll just be happy to be able to cut 2D parts. :D


-
@Syph007 said:
Well my CNC retrofit kit came today finally! :DNow I just have to figure out how to get it all installed, and pick up a driver board.. flood coolant tank and pump.. and a computer to run it.. learn CAD better.. :D
Hopeful by summer I'll get this all sorted or maybe sooner but its COLD in my shop right now.
The ball screws are nice and smooth, BIG upgrade from the stock lead screws. Apparently I can even get slightly larger balls and repack the nut for even more precision,... but im not at the advanced stage yet. I'll just be happy to be able to cut 2D parts. :D
Now you're good for some serious business!!! Can't wait to see what will come out from your shop in the near future!!!
:ahhh
:ahhh
:ahhh
:ahhh -
Looking forward to the what you make with these.
-
Syph007 you have to be one of the most dedicated Alox modders ever!!!
I love your work and need to save for one of your mods...
I remember seeing a few of Scibeer's mods that I would have liked to buy but then he retired ::)
One day I'll save......please don't retire ;) -
about the scalpel- you could have a raised nail knick ala the scissors on the China sacks. It's not elegant for sure, but it would work.
-
Im down to a critically low amount of scissors backsprings for 93mm alox now, so I forced myself to sit down at the computer and work on a new file. Ver 2.0 of the backspring is pretty much the same, but with some tweaks to make it easier to sand and finish, and also strengthen it.
I was always worried about the strength of the spring over the pivot hole so I beefed that up a bit. I use a 1/2 inch sanding mandrel to finish the inside edges and it could never get into the tight area near then end where the scissors tip rests so I increased that radius. The end of the spring that engages the scissors pivot is also slightly thicker which should give the scissors a bit more snap.
Now I have to wait 3-4 weeks for the waterjet, then heat treat, so hopefully in 2 months I should be restocked.

-
@Syph007 said:
Im down to a critically low amount of scissors backsprings for 93mm alox now, so I forced myself to sit down at the computer and work on a new file. Ver 2.0 of the backspring is pretty much the same, but with some tweaks to make it easier to sand and finish, and also strengthen it.I was always worried about the strength of the spring over the pivot hole so I beefed that up a bit. I use a 1/2 inch sanding mandrel to finish the inside edges and it could never get into the tight area near then end where the scissors tip rests so I increased that radius. The end of the spring that engages the scissors pivot is also slightly thicker which should give the scissors a bit more snap.
Now I have to wait 3-4 weeks for the waterjet, then heat treat, so hopefully in 2 months I should be restocked.
Ever evolving, I like that.

Oh and what happened to the liner lock?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
I look forward to what you come up with for this