Wood Scaled SAK pictures thread.
-
First Sak mod. Put some Red Cedar scales on my Yeoman Mechanic. I work in the forest and had been building a bridge out of an old cedar log (the size of it suggests it would have been 500+ years old when it fell). I liked the look of the wood so hiked a piece out and made the scales. Used a friends planer to bring them down to thickness, then shaped them with a knife and sandpaper. They are held on with epoxy. Haven't sealed/oiled them yet as undecided on what to use. Any suggestions would be appreciated. Thanks.


-
@BCNZ said:
First Sak mod. Put some Red Cedar scales on my Yeoman Mechanic. I work in the forest and had been building a bridge out of an old cedar log (the size of it suggests it would have been 500+ years old when it fell). I liked the look of the wood so hiked a piece out and made the scales. Used a friends planer to bring them down to thickness, then shaped them with a knife and sandpaper. They are held on with epoxy. Haven't sealed/oiled them yet as undecided on what to use. Any suggestions would be appreciated. Thanks.Nice work! I suggest boiled linseed oil or Danish oil, after which you'd need to sand the wood again with 800-1500-2000 grit because the grain will pop out slightly. Douse a clear cloth in the oil, apply it and leave it sitting for a few hours for it to soak in. Repeat this a few times to get the best color/texture, and then you can sand. After polishing I usually seal with beeswax, but an even better solution is carnauba wax if you have access to it. Good luck and please share the results

-
Looks good

Welcome.

-
Cedar does age quite nicely on its own. It depends what you want.
An oil, varnish or polyurethane finish will retain/enhance the colour to varying levels and offer varying levels of gloss and protection. Cedar will tend to age to a silvery grey and develop something akin to the patina on a carbon steel blade. -
Thanks for the welcome and suggestions!
-
Victorinox Rambler with scales made of caucasian-nut-root-wood

-
WOW! Beautiiful Rambler!
-
Two Classics - afzelia burl and redwood burl



-
Very nice...

Just as a thought though; I think too many beautiful wood scales are wasted on Classics. Ramblers, Vagabonds, and MiniChamps would be so much nicer.
-
Ooh those look nice!
-
@chris.customworks said:
Victorinox Rambler with scales made of caucasian-nut-root-woodGood choice to use a Rambler. Very Nice!
-
@ICanFixThat said:
Very nice...

Just as a thought though; I think too many beautiful wood scales are wasted on Classics. Ramblers, Vagabonds, and MiniChamps would be so much nicer.
I have more of this wood left for some 91mm SAKs :)
-
Very nice...

Just as a thought though; I think too many beautiful wood scales are wasted on Classics. Ramblers, Vagabonds, and MiniChamps would be so much nicer.
I have more of this wood left for some 91mm SAKs :)

-
Excelsior & Spartan
-
I have both: Huntsman Slim mod and Wooden Scales at the moment. It is a little rude, needs finish ops.
-
very nice work over here! congrats

-
Eco waiter. I had to reprofile the broken tip and the eco scales had the shield worn off so I decided to try to rescale in wood.
I sanded during the Super Bowl so these scales look better now. I will eventually add a coat of poly or 2



-
one more

-
Yew scales on a 91mm built from spare parts for my leather working kit.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login