Kampfer's Mini Surge (By Breezy12)
-

@Breezy12 said:
Got a pretty good start on the mod tonight...Tools of the trade:

the contenders weigh in:



a new record for me -- 30 minutes to get the Rebar plier head into the Wave! :D

I had both plier heads swapped in just under an hour. I guess practice really does pay off. ;)


both tools still have their original tool loadout, except I swapped in the S30V blade on the Wave. I also removed the scissors from the Wingman, but I didn't have time to do any Dremel work tonight... hopefully soon. :) Finishing up the Wave will be pretty straightforward; I just need to figure out how I'm going to get the Wave scissors to fit in the Rebar handle.

-
glad you like what you see so far, Kampfer. :D
just for the record, here's what I'm working on:
@Kampfer said:
What I have in mind is a mini Surge based on the Wave platform.- Replace Wave pliers with Rebar pliers
- Replace Wave scissors with Rebar awl
- Replace Wave file with Wingman scissors
- Replace Wave PE blade with Charge S30V blade
-
@Breezy12 said:
glad you like what you see so far, Kampfer. :Djust for the record, here's what I'm working on:
@Kampfer said:
What I have in mind is a mini Surge based on the Wave platform.
- Replace Wave pliers with Rebar pliers
- Replace Wave scissors with Rebar awl
- Replace Wave file with Wingman scissors
- Replace Wave PE blade with Charge S30V blade
Sounds pretty cool

-
Big thanks to Matt working OT on my Mini Surge.

-
some updates for Kampfer

I busted out the Dremel last night to reshape the tools that Kampfer wanted to add to the Wave (Wingman scissors and Rebar awl).
For the Wingman scissors, it's simply a matter of enlarging the pivot hole. I used a carbide bit in the Dremel:

Static electricity is cool. :D

The awl was up next... the back side needs to be reprofiled to allow the Wave handles to close completely. (I used the grinding wheel on the Dremel, followed by some fine grit sandpaper.) Luckily, no modification is required on the sharp edge of the awl. :)

I still need to finish a couple minor tweaks, but at this point, Kampfer's tools are basically finished:

Kampfer, check your PMs for some additional details. ;)
-
Nice work there Matt

Good to see someone getting an MT with exactly the tools they want :D
-
They look great! Thanks for the hard work, Matt.
Can't wait to get my hands on them. -
Those do look good.
live from Nate's mobile
-
Both the Rebar and Mini Surge are looking great!

-
Thanks guys!

I'm hoping to have some time tomorrow night to put the finishing touches on these so I can get them shipped back to their rightful owner.

I'll be sure to post a couple more pics when they're completely finished. :)
-
love it!
-
per Kampfer's request, I held a final weigh-in once all the finishing touches had been put on the tools. :D
interestingly enough, the Wave (now with Rebar pliers and Wingman scissors) didn't have a significant change in weght...

Both the Rebar and the Wingman lost a little weight, as expected...


-
humm..Mini Surge weights the same as before the mod, that is very interesting.
-
Yes it is. I figured it would be a tad heavier. Not much but some.
live from Nate's mobile
-
I probably should have weighed them in grams for a more precise measurement.

My guess is that the Rebar plier head is slightly heavier than the Wave's, but the Wave's file that was removed is slightly heavier than the Wingman scissors...

-
I forgot to post the concept art of Mini-Surge, here it is.

-
Very happy with the Mini-Surge, thanks Matt!

Here are photos of Mini-Surge (4 inch, 8.4 oz) comparing to New Surge (4.5 inch, 12.2 oz) :
-
Other than the obvious Rebar pliers, here are others new tools on the Mini-Surge.
S30V Blade from Charge TTi
Wingman's Scissors on outside. (File removed.)
Rebar Awl. (Scissors removed.) -
Looks very good indeed.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login