The Hacked Leatherman Owners Club.
-
I received my sacrificial BO Rebar today. I had hoped that the black oxide would have matched the black anodized scales better, but it still looks good IMO. It matches better in person, the BO sure doesn't photograph well. It might just be my phone.

Next I'm going to try swapping the awl from the Rebar with the micro driver on my ALX. I know I'll have to shave a little off the awl so it doesn't hit the rebar head. It also looks like it might be a hair thicker than the micro driver. I'll measure it with calipers before I start the swap.
-
Looks good.
live from Nate's mobile
-
Thanks to Matt, now I have my dream Leatherman: Mini-Surge
-
Thanks to Matt, now I have my dream Leatherman: Mini-Surge
Wingman scissors ? Did they fit right in or was there a little grinding work ?
Swiss Army knives .
there's a little bit of grinding required. at a minimum, the pivot hole needs to be enlarged to fit the Wave/Charge pivot. when I modded my skinny Charge, I also had to make some slight adjustments to the locking face to get the liner lock to properly engage, but no such modification was needed on Kampfer's Mini-Surge.
-
Thanks to Matt, now I have my dream Leatherman: Mini-Surge
Wingman scissors ? Did they fit right in or was there a little grinding work ?
Swiss Army knives .
there's a little bit of grinding required. at a minimum, the pivot hole needs to be enlarged to fit the Wave/Charge pivot. when I modded my skinny Charge, I also had to make some slight adjustments to the locking face to get the liner lock to properly engage, but no such modification was needed on Kampfer's Mini-Surge.
Good deal, thanks for the info.
Swiss Army knives .
-
no problem -- always happy to help!

-
ReFuse
-
I can't remember what thread it was mentioned in, but we were talking about what tool Leatherman uses to assemble/disassemble the knurled pivot screws. I sent Leatherman a email asking for any and all info they could give me on this as well as if they made the tool to do this in house or had them made for them. This is what I was sent back.
Thank you for contacting us with your questions.
Unfortunately, the questions you are asking are not something that we are able to provide with answers. We are not at liberty to share names of products or sources for our parts or processes. I’m sure you can understand the reasoning behind that decision.
Part of that reason is we do not recommend anyone take the tools apart – or make modifications to the tool - as that may void the warranty.
Thank you for your understanding of the above reasons on why I am unable to provide you with the answers you are requesting.
SoOoOoOo...... Nothing really. :D
-
@captain spaulding said:
I can't remember what thread it was mentioned in, but we were talking about what tool Leatherman uses to assemble/disassemble the knurled pivot screws. -
@captain spaulding said:
I can't remember what thread it was mentioned in, but we were talking about what tool Leatherman uses to assemble/disassemble the knurled pivot screws.
That's the one. I will quote over there.

-
@captain spaulding said:
I can't remember what thread it was mentioned in, but we were talking about what tool Leatherman uses to assemble/disassemble the knurled pivot screws. I sent Leatherman a email asking for any and all info they could give me on this as well as if they made the tool to do this in house or had them made for them. This is what I was sent back.Thank you for contacting us with your questions.
Unfortunately, the questions you are asking are not something that we are able to provide with answers. We are not at liberty to share names of products or sources for our parts or processes. I’m sure you can understand the reasoning behind that decision.
Part of that reason is we do not recommend anyone take the tools apart – or make modifications to the tool - as that may void the warranty.
Thank you for your understanding of the above reasons on why I am unable to provide you with the answers you are requesting.
SoOoOoOo...... Nothing really. :D
A bunch of mumbo-jumbo... they might as well have spit in your face with that reply

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

I think I would rather have the scissors than the awl possibly
)