It Was Bound To Happen One Day.
-
I used a couple of cheap and nasty 6.5mm sockets to make a couple of LM spline sockets.
You just put them in the vice with the LM in between and wind the vice up to force the bolt heads into the sockets.
Provided you're not using high quality sockets, the heads of the bolts are harder and the splines cut into the sockets.I was skeptical when I saw the original post on how to do it, but it works.
-
I've bought one of those "Made in Japan" Engineer Screw Pliers (also known as Vampliers) off of ebay after reading most of the posts by Metropolicity (Skinth maker) on what he uses to take apart his LM's. Used a Wingman and the Vampliers to tighten several used LM PST tools I bought off ebay.
I've since bought a second pair of Vampliers to do the job better since the Wingman slips a little.

-
There are some really good ideas posted.
I would like an actual tool to accomplish this adjustment.
I'm looking into the Vampliers.
Thanks for the help.
-
@PTRSAK said:
I used a couple of cheap and nasty 6.5mm sockets to make a couple of LM spline sockets.
You just put them in the vice with the LM in between and wind the vice up to force the bolt heads into the sockets.
Provided you're not using high quality sockets, the heads of the bolts are harder and the splines cut into the sockets.I was skeptical when I saw the original post on how to do it, but it works.
What a Great Idea
I never thought of making a socket .
I'm going to try make a set like these one day.
-
I have been thinking and I wonder if one of these would work?
I have personally used these (friends bit) on off size bolts or real chewed up bolts and it works great, but the Leatherman pivots probably don't have enough bite to catch. Does anyone have one to try out? -
I don't see anyway that tool could grasp a round headed screw,even though the screws are splined.
That socket would only be able to grasp a bolt with flat sides using their jamming principle.
-
I was able to unscrew one of the fasteners by hand.When I screwed it back in using needle nose pliers it still wouldn't tighten.So I removed it and this time I installed a lock washer and tightened it again.This solved the major problem of the handle swinging freely.It didn't resolve everything though.When you hold one handle,as the tool is in its closed position,then shake the tool it rattles.That's because the other handle still swings freely,if even only a fraction of an inch.
-
Winning the war on knurled nuts
</topic/7167
-
@trouthunter said:
Winning the war on knurled nuts</topic/7167
That is interesting.I've thought that a spline socket may be a better choice for this application.
Since I just received this tool,I think I'll send it to Leatherman and let them repair it.Althoug there have been some good ideas presented here .
Has anyone thought of contacting Leatherman and asking where they get their tools to assemble and repair their product?
-
Winning the war on knurled nuts
</topic/7167
That is interesting.I've thought that a spline socket may be a better choice for this application.
Since I just received this tool,I think I'll send it to Leatherman and let them repair it.Althoug there have been some good ideas presented here .
Has anyone thought of contacting Leatherman and asking where they get their tools to assemble and repair their product?
I am betting the wont tell you or they are custom made for Leatherman. If they were readily available the MTO Group would know where to get them.
-
Winning the war on knurled nuts
</topic/7167
That is interesting.I've thought that a spline socket may be a better choice for this application.
Since I just received this tool,I think I'll send it to Leatherman and let them repair it.Althoug there have been some good ideas presented here .
Has anyone thought of contacting Leatherman and asking where they get their tools to assemble and repair their product?
I am betting the wont tell you or they are custom made for Leatherman. If they were readily available the MTO Group would know where to get them.
I believe you are correct. I think they are either made for or by Leatherman themselves. I could be wrong and would love to hear from someone more knowledgeable than me about this.
I think a e-mail to leatherman is in order just for kicks though. :D
-
I'm pretty sure the official Leatherman repairers use special sockets that Leatherman had made (by modifying standard sockets with a plasma cutter or similar process). They wouldn't sell them to the public, but (IIRC) a couple of pairs escaped into MTo hands several years ago. I can't remember who are the current custodians. These were mentioned in a few MTo threads, so a search may find them.
The home-made version created by squeezing a soft socket over the knurled screws in a vice seem to work reasonably well for most people.
-
I sent Leatherman a email asking for any and all info they could give me on this as well as if they made the tool to do this in house or had them made for them. This is what I was sent back.
Thank you for contacting us with your questions.
Unfortunately, the questions you are asking are not something that we are able to provide with answers. We are not at liberty to share names of products or sources for our parts or processes. I’m sure you can understand the reasoning behind that decision.
Part of that reason is we do not recommend anyone take the tools apart – or make modifications to the tool - as that may void the warranty.
Thank you for your understanding of the above reasons on why I am unable to provide you with the answers you are requesting.
SoOoOoOo...... Nothing really. :D
I think J-Sews might have some of the ones that escaped. I could be wrong about that though.
-
@captain spaulding said:
I think J-Sews might have some of the ones that escaped. I could be wrong about that though.
Good memory
- take a look at reply #30 in this thread:</topic/6314
I thought so.

Do you think these are the exact same one's Leatherman uses in there factory?
-
@captain spaulding said:
@captain spaulding said:
I think J-Sews might have some of the ones that escaped. I could be wrong about that though.
Good memory
- take a look at reply #30 in this thread:</topic/6314
I thought so.

Do you think these are the exact same one's Leatherman uses in there factory?
Nope, they probably have a machine to do that. :D
Those sets were from a LM warranty repair shop in Netherlands I believe. Kwakster is still waiting for his set that is in possession of a UK member who's no longer active. :-\ One set is in Denmark and one in the US.
-
@captain spaulding said:
@captain spaulding said:
I think J-Sews might have some of the ones that escaped. I could be wrong about that though.
Good memory
- take a look at reply #30 in this thread:</topic/6314
I thought so.

Do you think these are the exact same one's Leatherman uses in there factory?
Nope, they probably have a machine to do that. :D
Those sets were from a LM warranty repair shop in Netherlands I believe. Kwakster is still waiting for his set that is in possession of a UK member who's no longer active. :-\ One set is in Denmark and one in the US.
Thanks for the info.

-
I'm not so sure DaveK still has those tools. I remember a post about when he was leaving that he was going to send them to someone in the U.S. so they would have them...

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login