Skinth Loadout Thread!
-
My Families four Skinth's -
**TOP: **Magnum with LM Surge, LM Wave, Fenix E12, County Comm 4" Pocket Pry Bar, TEC Centipede, Bit Extender, 42 Bit cards.
**MIDDLE: **L-Shield with Rebar, Removable Bit Drive, County Comm 3" Micro Pry Bar,
BOTTOM: My Son's Plus with LM Sidekick, LED Lenser P3, LM PS4, LM Brewzer. My Wife's OG with LM Wingman, Fenix E05, LM Micra.
Totally EDC Gear by theedczone, on FlickrMy EDC Gear all packed away...

EDC Gear Packed away by theedczone, on Flickr -
Very nice.
-





- Left side tube:
- Victorinox Spirit (/Surge/Swisstool)
- Victorinox metal clip
- Left inner pocket:
- Bit holder with 11 hex bits and magnetic bit adapter, modified to fit all Victorinox Philips drivers and Juice Philips driver.
3a. Metal bookmarks
- Left inner tube
- Victorinox ratchet (magnet mod)
- Leatherman adapter
- Hex powered tools adapter
- Back pocket
- Diamond sharpening rod (holder removed)
- Victorinox dual sharpener (cap removed)
8a. Card with info encased in plastic
8b. Notepad/ paper - Small leather coins purse with
a. a sewing kit with needles, curved leather needle, pins, safety pins, buttons, thread of different colors
b. cable wires
c. tough wire
d. Victorinox sharpening stone
e. Victorinox toothpick
f. Victorinox nylon string
g. two surgical blades
h. four band aids
i. two alcohol bands
j. some rubber bands
k. AAA battery
l. Victorinox mechanical pencil
m. IKEA pencil
n. IKEA paper measure tape
o. three Cybertool double bits and rubber band
p. three large needles
q. More small items added since, cotton included
- Right tube
- Leatherman Charge TTi (/Surge/Swisstool)
10a. CERN pen (red, black, chrome and short, perfect match) not shown
- Right inner pocket
- Recta/ Victorinox Compass/spirit level/ thermometer/ ruler/ magnifying glass (forgot to take it out for the pic)
11a. Paper clips
- Right inner tube
- MiniMag Lite Solitaire LED flashlight (with S-binner and lanyard)
- Main pocket
- Big BiC lighter
- Victorinox Swisschamp XLT with magnet modified Cybertool and magnetized fishhook remover (/Swisschamp/ XAVT/ ToolchestPlus/ Juice Pro/ or 2 85-93mm SAKs)
- Opinel Couteaux de Jardin #8 (workhorse) (/Outdoor #8/ DIY #8)
- Victorinox red neck lanyard and elastic lanyard for XLT (helps the lighter and XLT to stand taller and can be used when working)
- Front pocket
- Victorinox Watchmaker
- Office Razor
- Alcohol pads
-Front dual pockets
20. 2 Leatherman bit kits- Central flap
- Rubber band
- Aluminum ring
- Spyderco Endura
- Belt loops
- 20/150mm adjustable wrench
- Body
- D ring on top for hanging
- D ring behind left external tube with Sbinner for small items (/button LED light/ Minichamp- Ladybug combo)
-
@kkokkolis said:




[IMG]http://img.tapatalk.com/d/14/05/17/guvymy7y.Could you please take another side photo where you are wearing a different color pants? It's hard to distinguish between your legs and the skinth. I have a catchall coming in the next few weeks and I'm curious as to how well it carries on the hip. Thank you in advance!:) Your load out is impressive.
Sent from my iPhone using Tapatalk
-

I exaggerated here. The Skinth has ALL it's usual content plus the Endura plus a Surge in place of the Charge (that moved in the front). That's 2.1 kgr!!!
You can see the belt bends under the weight. But it doesn't look big at all and a sane load would be half of it with one Multi and one smaller SAK instead of 3 Multies and an XLT plus both LM and regular bits and adapters.

Normal load is 1.6kgr and I never wear it on my belt. That was an experiment. -
Awesome thank you very much that is very helpful. As it is right now I carry 2 MT's and a light on my belt. Each in there own sheath. So I am looking to consolidate and was hoping that my catchall wasn't going to be too terribly huge. But yours look perfect. Thanks again for sharing the pics.
Sent from my iPhone using Tapatalk
-
No, it's not huge. Leather tool holders are much bigger and "banana" type bags that used to be fashionable a decade ago bigger also. But since we feed Skinths with stainless steel they can become really heavy. Keep it under 1kgr or 2 pounds and you'll be OK. I overloaded it because I have perfected a 3 bag system to carry it and I'm not a worker that needs the tools in the ready position. I just take out the Skinth and do the job when I need to.
-
kkokkolis, might I suggest a belt designed for carrying a firearm. More specifically one of the reinforced shooting belts. They are specifically designed not to bend or droop under weight like yours is. Just a thought.

-
...
Peak LED Solutions EigerSo... what's the Eiger like? AA or AAA?
AAA.
Peaks are the most customizable production lights on the market. A choice of 9 power levels or QTC for variable output, three materials (HA, SS, Brass), several body types (pocket, lug, keychain, 2xAAA), mechanical momentary switch.... it goes on and on--enough to make your head spin.
Peaks are the only remaining lights that are built on the older, simple twisty platform like the ARC AAA, the CMG Infinity, etc. They are extremely durable. They are well-regulated for good runtime on a variety of cells (alk, NiMH, Li-Ion) and have an excellent beam profile that is typically floody; especially with the medium optic. This makes them ideal to use as a close to medium-range headlamp when clipped to the brim of a hat/cap.
I like them!
My Eigers are probably my most-used lights due to their versatility. -
I think I've settled on my Skinth set up............ for now.................maybe :D. I have been going with this set up for a bit and really like it. I'm back to 7-8 ish on my hip and honestly dont notice it at all.



-
Skinth M7 Toollet + Nano.


Tweezers + Swiss Army Knife (birthday present circa1984/85) and a 1/4" screwdriver bit on one side of the M7 Toollet.

Zach Wood TiBar + Kenn Jordan BroBIA Deluxe on the other side.
20 bucks on the inside.


Nail clippers, keys, Atwood Ghost and 1/4" screwdriver bit in the Nano.
-
Welcome to the forum.

And FYI, the M7 was actually designed exactly one year ago to celebrate the Multitool.org 7th anniversary, hence M7. ;)
-
@enki_ck said:
Welcome to the forum.
And FYI, the M7 was actually designed exactly one year ago to celebrate the Multitool.org 7th anniversary, hence M7. ;)
Thanks, enki_ck! I accidentally clicked send before I was finished with my post so more pics added up above. The M7 Toollet is great, so is the Nano.
-
Love the Nano. I need to get one of those for my LM Minitool.
-
Ordered a Skinth XL on July 3rd. Can't wait to get it. Sent some questions in about potentially upgrading to a Magnum and switching to orange thread and MOLLE back, but even if that won't be doable, very excited to get my first Skinth. Already eyeing an M7 and CatchAll for next time.
Sent from my XT1060 using Tapatalk
-
@BenjaminDuncan said:
Ordered a Skinth XL on July 3rd. Can't wait to get it. Sent some questions in about potentially upgrading to a Magnum and switching to orange thread and MOLLE back, but even if that won't be doable, very excited to get my first Skinth. Already eyeing an M7 and CatchAll for next time.Sent from my XT1060 using Tapatalk
You should be pretty stoked once you get it. Welcome to MTo. I am still going with my same set up and it has worked out great for me. I don't see myself changing it any time soon. Set aside some time when you get your Skinth for setting it up over and over again :D. Take plenty of pictures when you get it.
-
Will do and thanks for the warm welcome. :)
Sent from my XT1060 using Tapatalk
-
I'm thinking about The Skinth Plus (or OG), and was wondering if anyone here had any pics they could share?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
