What did you use your Leatherman for today?
-
Installed a backup camera in my '09 Toyota Corolla. I thought I might be able to do it in the parking lot of the store where I bought it, just in case I needed to buy any additional supplies or tools.
It took a total of 15-20 minutes, and the only tool I needed was my Leatherman Charge. The wireless camera attached behind the license plate with some stickum. The power lead went through a notch I made with the file beside the license plate lamp, which I loosened with the Leatherman screwdriver. It was easy to route the wires and tie-in power from the backup light wires using the included T-taps. The pliers on the Charge were ideal for crimping. The other portion was the mirror/display, which fits over the existing mirror with spring-loaded clamps. The power wire was easy to route around the headliner and into a 12V socket.
That's it, all done. It has been working perfectly for many months ever since. I love the display built into the mirror, because it doesn't take up any extra space. The image only appears in the mirror when you are reversing, and the rest of the time, it functions like an excellent rear-view mirror, with built-in dimming.
-
@Landrew said:
When anchoring a post in the ground . . . pour a bag of ready-mix in the bottom . . . The next rain takes care of the rest."I've heard of that method, and its sounds cool. Certainly reduces labor. But I just like seeing the concrete firm up before my eyes and know for sure that the post (in my case flag pole) was dead plumb before I walked away. With my luck, by the time the concrete set up, my base would be off a couple of degrees and that really gets magnified at the top of a 25' flag pole. I would like to try it sometime, though.
-
@Landrew said:
When anchoring a post in the ground . . . pour a bag of ready-mix in the bottom . . . The next rain takes care of the rest."I've heard of that method, and its sounds cool. Certainly reduces labor. But I just like seeing the concrete firm up before my eyes and know for sure that the post (in my case flag pole) was dead plumb before I walked away. With my luck, by the time the concrete set up, my base would be off a couple of degrees and that really gets magnified at the top of a 25' flag pole. I would like to try it sometime, though.
In my experience if you tamp it firm, it stays put. I use rocks to wedge things tight if I can. I don't like adding water because it seems to make things move.
-
Today I used the Squirt to try and open a clamshell and ended up cutting myself.

-
@CanadianLMfan said:
Today I used the Squirt to try and open a clamshell and ended up cutting myself.
You used the chisel blade then? Was it sharp?
-
Today I used the Squirt to try and open a clamshell and ended up cutting myself.

You used the chisel blade then? Was it sharp?
I don't think it was sharp enough, so then the blade somehow snapped onto my finger. :(
-
Taking a 28 year old swimming pool down..
J

-
A walk in the woods on the farm next to the creek I found a boat that washed down stream during the last flood. I used the saw on my rebar to cut a limb and pole back down the creek.
<a href="http://s605.photobucket.com/user/woodland9964/media/GEDC0018_zps82303b5e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i605.photobucket.com/albums/tt132/woodland9964/GEDC0018_zps82303b5e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
My desk fan at work seized yesterday. The motor was still working, but the shaft had seized. So, Blast to the rescue. I stripped the motor down, cleaned everything and re-lubed it so the shaft could spin freely again. Works as good as ever now.
I'll probably have to take it apart and re-lube with grease at some stage as I'm just using oil as it's all I had on hand, but it works for now.



-
Used my juice s2 too cut some 6mm rope....and broke the blades back spring
Sent from my iPad using Tapatalk
-
@Sparkydave said:
Used my juice s2 too cut some 6mm rope....and broke the blades back springSent from my iPad using Tapatalk
Another one bites the dust

-
The little bar actually snapped
Sent from my iPad using Tapatalk
-
@Sparkydave said:
The little bar actually snappedSent from my iPad using Tapatalk
This seems to be an epidemic with the Juice.
-
launch time at the office today....

-
I used the file on my BORebar to cut a fork in half for some kind of craft project my wife was going to try. I guess it was to make the handle end into a ring somehow. I used the Supertool's file to smoothen the cut end of the handle as the Rebar's seemed to be too coarse for that task.
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140715_185916_130_zpsdc06e994.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140715_185916_130_zpsdc06e994.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
@Monrogue said:
I used the file on my BORebar to cut a fork in half for some kind of craft project my wife was going to try. I guess it was to make the handle end into a ring somehow. I used the Supertool's file to smoothen the cut end of the handle as the Rebar's seemed to be too coarse for that task.<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140715_185916_130_zpsdc06e994.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140715_185916_130_zpsdc06e994.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
It's nice to see them earning their keep :D
-
I used the file on my BORebar to cut a fork in half for some kind of craft project my wife was going to try. I guess it was to make the handle end into a ring somehow. I used the Supertool's file to smoothen the cut end of the handle as the Rebar's seemed to be too coarse for that task.
<a href="http://s1326.photobucket.com/user/khtibbetts/media/MTs-SAKs/IMG_20140715_185916_130_zpsdc06e994.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i1326.photobucket.com/albums/u649/khtibbetts/MTs-SAKs/IMG_20140715_185916_130_zpsdc06e994.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
It's nice to see them earning their keep :D
It is

-
Used the Piranha II to pry up some nailed down wooden bits on a roll top desk I'm refinishing [worked great]. When a nail popped through the wooden piece, I tried the MUT foot [i.e. hammer, but in reverse - get it? ;)] on the nail. I don't know my nails that well technically, but a kind of finishing nail but with a flat head. Anyway, MUT popped the head off. When I couldn't pull the remnant out with MUT pliers [tough bugger], Surge came through with newww blade exchanger holding a hacksaw.
Aaand...used the MUT hammer to close the louvers on the attic fan. They never close now, once the fan is turned off. Probably because I haven't WD-40'd them. But if I did - then I'd never use the MUT for that purpose again, would I?? :D
-
First use of the scissors on my modified Kick to cut out the Amazon returns label.

-
Today, I used the phillips of my modded Wave, to open a control box.
<a href="http://abload.de/image.php?img=20140718_15291932e5z.jpg" target="_blank" rel="noopener noreferrer"><img src="http://abload.de/img/20140718_15291932e5z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login