Show us your fixed blades
-
@sparky415 said:
Great collection
Can you tell us more about 'Sese' please Dmanuel?
He is a local bladesmith that makes his blades from leaf springs and ball bearing steel. He trained with JEST here in Philippines which is a Joint Military Camp between the US and Philippine military, their instructors are mainly the best "bushmen" from one of the local tribes called Aeta that have been living in the jungle for a few years now ;)
He specializes in traditional shaped blades but he is always open to new designs and always has a ton of different designs on hand. Being a bushcrafter at heart means he really knows what others are looking for, and if you don't he is more than happy to walk you through different blade geometries until you find the one that will work best for your needs. Great guy to work with, and often includes a blade or two for free when you purchase from him.
You can contact Dr. Arvin Sese directly to see about purchasing one. I know he ships worldwide.
-


that's us mobile
-
I got this GSO 4.1 a few months ago and hope to use it in the woods once it warms up.
Sent from my fancy work phone.

-
[quote author=Grathr link=topic=7563.msg827618#msg827618 date=1389528001]
Got the Boker Magnum Elk Hunter Skinner yesterday. Heres a pic. Ill post some more about it after it has seen some more use.

Sent from a device made from star dust using Tapatalk
I got one yesterday, as well

I really like the size, it was smaller than I expected, but that's a good thing :)
I happened to find myself looking at this Boker again and was wondering how you two were getting along with them? :)
Honestly, it hasn't seen any more use than cutting up some sausage, yet... But that it did quite well. Just, I don't really get to carry it in my urban environment.
Fair enough. I've got the same problem, basically no reason to carry/use a sheath knife in my day-to-day life either. :-\ Would you call it well put together though?
Maybe if I could convince my wife it's a new kitchen knife?

[/quote]Sorry about the slow reply. Its a very well built knife. i have been using mine a lot in the garden lately. Whenever I go out to do some yard work like trimming the apple trees, cutting down unwanted bushes and saplings and such, it comes with me. I must admit that it has been abused quite a lot, but it has taken it well. Im very happy with it.
-
Gahhh! I don't need one, I don't need one!! :ahhh
Cheers for the feedback mate.

-
Gahhh! I don't need one, I don't need one!! :ahhh
Cheers for the feedback mate.

You do NEED one!
that's us mobile
Ductapetech is right. You do need one >:)
Sent from a device made from star dust using tapatalk
-
Great collection

Can you tell us more about 'Sese' please Dmanuel?
He is a local bladesmith that makes his blades from leaf springs and ball bearing steel. He trained with JEST here in Philippines which is a Joint Military Camp between the US and Philippine military, their instructors are mainly the best "bushmen" from one of the local tribes called Aeta that have been living in the jungle for a few years now ;)
He specializes in traditional shaped blades but he is always open to new designs and always has a ton of different designs on hand. Being a bushcrafter at heart means he really knows what others are looking for, and if you don't he is more than happy to walk you through different blade geometries until you find the one that will work best for your needs. Great guy to work with, and often includes a blade or two for free when you purchase from him.
You can contact Dr. Arvin Sese directly to see about purchasing one. I know he ships worldwide.
Thanks Dmanuel

-
Gahhh! I don't need one, I don't need one!! :ahhh
Cheers for the feedback mate.

You do NEED one!
that's us mobile
Ductapetech is right. You do need one >:)
Sent from a device made from star dust using tapatalk
If I could find one at a reasonable price in the UK I would be very tempted, however it's just a little more than I am willing to spend on something I absolutely don't need, no matter how lovely it looks. :D
-
Traditional hand made, possibly with a leaf spring.
For 20 Euro, it looked OK to buy. The maker has a good reputation.



-
no comment.. :D

-
Nice blades Dks.
That's us mobile.
-
-
Nice!!!
That's us mobile.
-
@Teofilo said:
I also have blades similar to dmanuel.
If Batangas have their balisongs and the South have their kris, the northern part of the Philippines
esp. the Ifugaos have these kind of blades:I'm drawn to the black 'latino-style' on the top.. Been contemplating the folded socket handles on 'facãos' and 'espadas' for a while now
-
I really don't have any fixed blades, besides my ka-bar which at first I used as a hidden blade on a larger backpack and sling, but it was too much. Other then that I have some double carry hunting and fillet knife for joining some magazine(junk) and what you see below, if that counts, it doesn't fold, and it cuts(seatbelts) lol, that one goes with me on my EDC bag,, cause that also pops tops if you noticed :D , nice thing is it's light, and fits perfect on any strap! I added the paracord and by doing so the end fits tight on the outside of the fist and gives that full size grip. JR





-
Very nice

Sent from the astropathic choir.
-
Have been going through a bit of a personal renaissance with my ontario ct1 machete
Here it is a few years ago with my eco-drives

and a quick photo today with my 18" 'Brasileiro'

What i love about the ontario is the 3mm 1095 blade. I often read about 'true machete users' favouring the 2mm or even 1.5mm blades. Personally i think it depends on what you are after. For me compact portability is a big concern and when you go shorter you can afford to go stouter. The ontario 12" has a similar weight to my thinner 18".
I have been reflecting on the little machete and decided its time for me to get round to rehandling it with homemade micarta. One reason for the mod is i want the handles to be detachable. I still need to test the theory but since majority of the work done on longer machetes is only on the top 6" i figure i could fashion a longer handle from a sapling to improve reach/leverage if the regular need arises.
So far i have removed the handle and shaved off the jutting lower 4th rivet, still deciding on exact colours for handle
-
@Santos said:
Have been going through a bit of a personal renaissance with my ontario ct1 macheteHere it is a few years ago with my eco-drives

and a quick photo today with my 18" 'Brasileiro'

What i love about the ontario is the 3mm 1095 blade. I often read about 'true machete users' favouring the 2mm or even 1.5mm blades. Personally i think it depends on what you are after. For me compact portability is a big concern and when you go shorter you can afford to go stouter. The ontario 12" has a similar weight to my thinner 18".
I have been reflecting on the little machete and decided its time for me to get round to rehandling it with homemade micarta. One reason for the mod is i want the handles to be detachable. I still need to test the theory but since majority of the work done on longer machetes is only on the top 6" i figure i could fashion a longer handle from a sapling to improve reach/leverage if the regular need arises.
So far i have removed the handle and shaved off the jutting lower 4th rivet, still deciding on exact colours for handle
Nice ones brother.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



