Rebar Pocket Clip Hack Pics.
-
@neillcurrie said:
I think there's also a lot of promise in fitting the removable clip from a Wave into the space that's between the file and the small screwdriver of the Rebar, after replacing the lanyard with an appropriate diameter spacer (or grinding a smidge off the diameter of the Lanyard attachment, and keeping it in/on the Rebar).That is a great idea.
A little late for me but maybe Breezy or geekdadrepair could give it a go.
One would have to bend the clip a little to match the handle angle and figure out how to tighten the screw.
Upside is less work involved.
Downside would be that it still wont deep pocket carry. -
Zoidberg, Were you able to add the wave pocket clip on your Rebar without using a Kick pivot. Were you able to do it using the screw that came with the Kick pocket clip. I would like to the pocket clip mod to my Rebar but i don't want to sacrifice a Kick to do it.
Thanks,
Mike -
@Mike 56 said:
Zoidberg, Were you able to add the wave pocket clip on your Rebar without using a Kick pivot. Were you able to do it using the screw that came with the Kick pocket clip. I would like to the pocket clip mod to my Rebar but i don't want to sacrifice a Kick to do it.
Thanks,
MikeYou still can get kick clip from LM site
-
@Mike 56 said:
Zoidberg, Were you able to add the wave pocket clip on your Rebar without using a Kick pivot. Were you able to do it using the screw that came with the Kick pocket clip. I would like to the pocket clip mod to my Rebar but i don't want to sacrifice a Kick to do it.
Thanks,
MikeCorrect. Rebar pivot with Kick pocket clip screw.
It wasn't until after I was finished that I noted antouant had used the Kick pivot.
I don't have a Kick so it didn't really matter either way. -
I think there's also a lot of promise in fitting the removable clip from a Wave into the space that's between the file and the small screwdriver of the Rebar, after replacing the lanyard with an appropriate diameter spacer (or grinding a smidge off the diameter of the Lanyard attachment, and keeping it in/on the Rebar).
That is a great idea.
A little late for me but maybe Breezy or geekdadrepair could give it a go.
One would have to bend the clip a little to match the handle angle and figure out how to tighten the screw.
Upside is less work involved.
Downside would be that it still wont deep pocket carry.Tightening the screw wouldn't be an issue at all. The clip is removable: just tighten everything up, <u>then</u> slip the wave clip into place.
It would deep carry as deep as a Wave carries with the same clip, who needs deeper than that? The whole tool would be inside the pocket, only the exterior of the clip visible. -
I think there's also a lot of promise in fitting the removable clip from a Wave into the space that's between the file and the small screwdriver of the Rebar, after replacing the lanyard with an appropriate diameter spacer (or grinding a smidge off the diameter of the Lanyard attachment, and keeping it in/on the Rebar).
That is a great idea.
A little late for me but maybe Breezy or geekdadrepair could give it a go.
One would have to bend the clip a little to match the handle angle and figure out how to tighten the screw.
Upside is less work involved.
Downside would be that it still wont deep pocket carry.Tightening the screw wouldn't be an issue at all. The clip is removable: just tighten everything up, <u>then</u> slip the wave clip into place.
It would deep carry as deep as a Wave carries with the same clip, who needs deeper than that? The whole tool would be inside the pocket, only the exterior of the clip visible.Okay.
That can work.
I don't have a Wave and can only reference a Charge and Surge.
The pivot barrel is a different size to the clip.
On the Surge the end cap is shaped to fit with the clip.
On the Charge there is a small washer that fits between the clip and the pivot barrel.
I could test it out with the Charge washer tomorrow after work if you would like me to. -
I am looking at my Rebar i think i can take out the lanyard loop and grind the outside of it so the Wave pocket will fit over it. If need be i could open up the inside of the pocket clip as well. As a plan B i have an extra Wave and Serge lanyard loops the thin ones that come with the tools. I am going to give it a go tomorrow while watching football.
Mike -
@Mike 56 said:
I am looking at my Rebar i think i can take out the lanyard loop and grind the outside of it so the Wave pocket will fit over it. If need be i could open up the inside of the pocket clip as well. As a plan B i have an extra Wave and Serge lanyard loops the thin ones that come with the tools. I am going to give it a go tomorrow while watching football.
MikeI am waiting for parts thanks to Breezy12 and I will try to do almost the same and see if I could put the Wave clip on my ST300.
-
It may be posable to just open up the wave lip and use it on the rebar. I would like to be able to use a standard wave clip and use it the same as on a wave or serge.
Mike -
-
-
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

They look much the same. 
I meant the two Rebars. 



