The Hacked Leatherman Owners Club.
-
@hiraethus said:
They're ok on threads and paper but on paracord, fingernails and cable ties they just push whatever you're cutting out the front of the scissors. I'll try sharpening the blades and see if that makes a difference.Ah, gotcha.

I agree, try sharpening them first before you discount them as an option. I am of very few who prefer Wingman scissors instead of Vic ones in the Wave

-
I been doing a lot of thinking about this whole scissors situation. Have had my stock Wave on my side for a couple of weeks now and I am trying my best to find uses for the scissors but to no avail.
It is not that a knife would work fine but I can not even find stuff that scissors would be good for. Maybe cutting errant strings off my uniform. That is about it.
Look forward to December and not having scissors again to see if I miss them. Thinking I will not though.
On the plus side of this it will save me some money modding tools to have scissors and make carrying my Old Cross Pioneer easier.
-
I wouldn´t have any use for the tiny Wave scissors, too. In fact i next to never used to have scissors with me, and i never missed them.
But i admit ... since the Surge is on my side, i found myself using it´s scissoers from time to time. Not nearly to a daily basis, but when i need them they are big and good enough to do the job (mostly cutting bandaids :D, but also other things like those very small electrical cables, paper, ....).
-
Yeah Lich. Very infrequent use is what I am thinking, if at all. No way I will need them so much they should be on the outside of my tool.
As for the small size I have a SAK Evowood 18 on the way so we will see if maybe size matters.

-
I really only use my scissors to trim the straws on my kids drinks at a restaurant if the straws are too long. Other than that..... this thread got me thinking, what do I really need them for?
I think I'm gonna save room on my full size lm to utilize it for something else, and just carry a micra type tool on my keys -
@JBW1 said:
I really only use my scissors to trim the straws on my kids drinks at a restaurant if the straws are too long. Other than that..... this thread got me thinking, what do I really need them for?
I think I'm gonna save room on my full size lm to utilize it for something else, and just carry a micra type tool on my keysMy plan is to pretty much own the SKTC and win me a Micra for my keyrings.

-
I have a SAK Alox Classic on my key chain. Small scissors but the are precise and sharp. I cut an occasional thread, hang nail, fingernail, and coupons. I could live without them in my multi-tool though.
-
Regarding the outside - as long as my main need on the Surge (serrated blade, plain blade, sawblade) are covered oho, i don´t care for whats in the fourth slot. But putting the scissors in is not that bad, as it enables big and usefull scissors - small scissors are wasted space for me, no matter if inside or outside.
-
@Lichtbote said:
Regarding the outside - as long as my main need on the Surge (serrated blade, plain blade, sawblade) are covered oho, i don´t care for whats in the fourth slot. But putting the scissors in is not that bad, as it enables big and usefull scissors - small scissors are wasted space for me, no matter if inside or outside.Fan of the saw even though I use it not so much. But do you find yourself using the saw more then a good file? Not this guy.
-
I use both.
-
@hiraethus said:
I had to tickle a tiny bit off one corner of the saw too, so it locked easily when I moved it to the serrated blade slot. The small flat driver is modified too, to clear the lock pivot.Not (yet) a Wave owner but I have a plan for a "Knifeless Wave". Couple of questions. Firstly taking account of length only could a 3D Phillips be made to fit in lieu of the bit holder?
Secondly the saw locking edge would have had the opposite bevel, presumably why it needed a bit of a grind. Once ground did it lock as securely as in the correct bay?
-
@ducttapetech said:
I use both.Yeah the question was which is used the most? Saw or File. My vote was file by a long shot, but again I am in the desert so yeah.
-
I use both.
Yeah the question was which is used the most? Saw or File. My vote was file by a long shot, but again I am in the desert so yeah.
Ah gotcha. Ok, it would be.......both. ;D
I use both about the same. -
Hey, what can I say, I use all the tools on my Surge.
-
@HarleyXJGuy said:
Fan of the saw even though I use it not so much. But do you find yourself using the saw more then a good file? Not this guy.Saw - each of them alone not that often, but counted together (wood AND metal) i do.
File - one time, to test it when i bought the Surge.
A good file is often used by me - but they are full sized in my workbench, or the special type for my filing machine. ;)

-
I had to tickle a tiny bit off one corner of the saw too, so it locked easily when I moved it to the serrated blade slot. The small flat driver is modified too, to clear the lock pivot.
Not (yet) a Wave owner but I have a plan for a "Knifeless Wave". Couple of questions. Firstly taking account of length only could a 3D Phillips be made to fit in lieu of the bit holder?
Secondly the saw locking edge would have had the opposite bevel, presumably why it needed a bit of a grind. Once ground did it lock as securely as in the correct bay?
yes, the 3D Phillips from a Rebar/Blast/Fuse/Kick/etc. can be installed in place of the bit driver, but you'll need to either remove the blade safety lock pins or grind down the driver. take a look through the earlier pages of this thread and you'll see some examples. :D
-
@pingu said:
Secondly the saw locking edge would have had the opposite bevel, presumably why it needed a bit of a grind. Once ground did it lock as securely as in the correct bay?Yes. Well, if I'd not taken too much off it would have.
It only needed a very light touch - it may have been possible to bed it in without any grinding. -
@hiraethus said:
it may have been possible to bed it in without any grinding.Need I say it?
-
Have they stopped putting bromide in your tea or something?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login