'Les Stroud' Engage Multitool TEST TO DESTRUCTION!
-
You people are sick,just suck i tell you!
Keep up the good work

-
There might not be a lot more testing this evening, but I'm all for hearing other folks' ideas on what to try next.
Come on, guys. Let's hear those wickedly brilliant tortures!
-
Wire cutting test.
How thick of wire can it cut.
Coat hanger wire I'm betting but nothing much thicker
-
Send it to me here in Afghanistan and I will seeif it can survive the Grenade test.
Yes it is exactly like it sounds.

-
Do we need to name this tool 'Whipping Boy?"

-
@Lynn LeFey said:
So... I went out into the garage, to get MORE nails.
Both the Engage and Sidekick cut through the trim nail.
Then I got to that roofing nail.
I had to press the Engage against the floor of the garage to generate enough force to cut the roofing nail, bit it DID IT... kind of.
The result is that now, when the handles are fully pressed together, the plier head doesn't close. FAIL!

And just so you all know, I ALSO cut the roofing nail with the Sidekick. The anvil cutters of the Sidekick required even more force than the Engage's. I was LITERALLY standing on the handle of the plier to push it closed. I was applying probably 150 lbs of force when the Sidekick cut the nail, and something more like 100 or less when the Engage cut through.There is absolutely ZERO damage to the Sidekick. While I would consider this test abusive, it also makes me REALLY appreciate how well the Sidekick is made. Not so much with the Engage.
I didn't bother trying the largest nail, since the Engage is pretty well done with any nail cutting, or fine plier work, from now on.
I don't know how I missed this

-
Dr. Evil suggests liquid hot magma.
-
@HarleyXJGuy said:
Dr. Evil suggests liquid hot magma.And sharks with frikin' lasers?
-
@Lynn LeFey said:
Dr. Evil suggests liquid hot magma.
And sharks with frikin' lasers?
"Are they ill tempered?"
-
if you know someone with a rifle, you shoukd shoot it
-
@Lynn LeFey said:
Dr. Evil suggests liquid hot magma.
And sharks with frikin' lasers?
"Are they ill tempered?"
Yes, ill tempered but no sharks, they are mutated sea bass...
-
Thanks for your highly entertaining, thorough review, Lynn. It illustates what was evident but needed to be experimentally proved. Now that's science
No ideas at the moment, sorryIt's lame that people will put things like these on the market, with big names on 'em acting as bait / guarantee. It borders fraud for me. I say kill it with fire, recycle the thing so it may rest and become useful again (hopefully).
-
Okay. I woke up this morning thinking about something. I was wondering what a tool might reasonably be expected to take. So, I googled 'normal male grip force', and found a paper on grip strength.
48.5 kg in the primary hand of a male who does manual labor.
That's about 107 lbs.47 kg for a 'skilled' male. I suppose they mean white-collar type here.
That's about 104 lbs. Not much difference, really, on average.I'm pretty sure that's very near to the ballpark of pressure I was applying to the Engage to cut the roofing nail yesterday. It was more than I could generate from my own normal grip, but not vastly more. Whereas, the force I applied to the Sidekick WAS vastly more than a human could normally muster.
Okay. On to other matters. When I broke the scissors off the other day, I left the stub of metal they had been attached to in the 'extended' position. I folded it back into the 'closed' position this morning, and noticed that the backspring which is intended to give it retention in the open position was doing essentially nothing. So, leaving a tool in the open position overnight will permanently deform the backspring, it seems.
While attempting to press the backspring, hoping to maybe bend it back to make it more useful, I accidentally busted off the back plastic panel. Oops. However, it gives us an opportunity to see the tool's construction. The back panel is held in place by 6 thin plastic pins, molded into the panel. (sheared off here, but you can see the holes in the metal of the tool handle that the pins slot into.

-
In other news, I removed the (worthless) whistle from the tiny flashlight that came with this kit. Here's a pic of the flashlight next to a Fauxton and my foursevens A0.
It is TINY. And happens to have a little hole at the base that a lanyard could be run through. I don't know what the run time is on it, but I'll test that before all this insanity is over.
Weight on the light is 5 grams, or about 1/5 of an ounce.

-
@Lynn LeFey said:
In other news, I removed the (worthless) whistle from the tiny flashlight that came with this kit. Here's a pic of the flashlight next to a Fauxton and my foursevens A0.It is TINY. And happens to have a little hole at the base that a lanyard could be run through. I don't know what the run time is on it, but I'll test that before all this insanity is over.
Weight on the light is 5 grams, or about 1/5 of an ounce.

Wow, that is tiny and also looks like the most interesting part of this toolset.
-
The firesteel is also pretty good.
I might have to stress again that this kit is not a complete fail.
-
ok i'm calling it in, you're getting Stockholm syndrome for that tool
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login