My latest Leatherman ... the OHT (pic heavy !!!)
-
I've already started a topic here, a couple of days ago, about how I thought the quality of the Leatherman MOLLE sheaths seemed better a couple of years ago compared to the latest ones, because the one I recently got with my BO Rebar seemed of lesser quality than the one that came with my BO ST300 a couple of years ago.
I also read this in JAfromMN his OHT topic:
@JAfromMn said:
...
speaking of the oht sheath the brass drain whole fell out of mine so my sheath has a nice little whole in it that looks like crap and its gonna rip out from there.I got a skinith for it but I want to see how long it lasts.
leatherman should get a quantity sheath made in the USA for there tools
And when I look at the pic below, I'm not surprised about that (notice how the brass drain hole is being pushed up by the pivot point on the OHT).
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/027_zps7d42754e.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/027_zps7d42754e.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
So I bought myself a couple of MOLLE sheaths online (along with the multitool I'm going to get from my wife and kids for Christmas :D). These MOLLE sheaths only cost 10 Euro (for one), so I thought it was worth the gamble (the Leatherman MOLLE sheath that comes with the OHT costs 20 Euro over here, the XL MOLLE sheath that comes with the MUT costs 25 Euro). You can remove the closure flap of the sheath since it's attached with velcro on the inside of the pouch. This way you can adjust the sheath to the length of the tool. So it will fit my OHT, my ST300, but also my Rebar or my Spirit.
Since I've just received these sheaths, I haven't used them, but they do look quite good at first inspection. They sure feel better made than the original Leatherman MOLLE sheath that came with the OHT. And since you can adjust the length, you can make it so the OHT doesn't push against the drain hole like it does in the original one.
The khaki one is holding the OHT, the olive one a Rebar.
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/127_zps30238069.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/127_zps30238069.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/124_zpsa35ca7d9.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/124_zpsa35ca7d9.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/106_zps39b394d5.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/106_zps39b394d5.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/107_zps39320c79.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/107_zps39320c79.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/101_zps88aa2e6f.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/101_zps88aa2e6f.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/108_zps5eecb6fa.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/108_zps5eecb6fa.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/114_zps69d2d757.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/114_zps69d2d757.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/118_zps02d53c50.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/118_zps02d53c50.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/120_zpsff901b26.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/120_zpsff901b26.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/121_zpsce7b6682.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/121_zpsce7b6682.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
I don't use MOLLE sheaths for EDC normally, I only use them when I go hiking in the Ardennes forest (or places like that), so it might take a while before I can give you guys an update on how these sheaths are holding up. But when I know more, I'll make sure to post it here ;).
-
And here are more pics ;).
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/092_zps32f629e8.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/092_zps32f629e8.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/142_zpsc1708276.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/142_zpsc1708276.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
And more ...
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/152_zps18a7d4f3.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/152_zps18a7d4f3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/156_zpsd2a2b39a.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/156_zpsd2a2b39a.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
<a href="http://s739.photobucket.com/user/Rikske77/media/Leatherman OHT/158_zps07d934c2.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i739.photobucket.com/albums/xx39/Rikske77/Leatherman OHT/158_zps07d934c2.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Seriously outstanding pictures
.I really like those Codura/Molle sheaths.
-
Great pics !
-
Great pics as usual buddy
How do you like the OHT so far? -
I hope your enjoying the OHT TG,I'm happy to take the blame for this one
It's been ages since I've carried mine
,think that I'll drop it into my EDC this week 
-
Great photos! I'm inspired to carry my OHT tomorrow now.
-
Very nice.
If somebody wants just one out of the frony plier based multitool, should he choose this over any of the original Gerbers? -
Excellent pics as always.
-
Great pics like that just make me want one more. :ahhh
-
I'd love one of these - perhaps with a bigger saw though.
Not sure about the exposed velcro on those sheaths... -
Thanks guys
.@Monrogue said:
Great pics as usual buddy
How do you like the OHT so far?I haven't really used it yet, but it does feel more like a Gerber than I thought it would. The sliding plierhead is just as much fun to open as it is on my Mr. Pinchy :D. But on the other hand, it's the first Leatherman I own that can't cut paper with its wire-cutters ... All the other tools, as "small" as they may be, lock very firmly into place, and they sure feel very solid.
Like I said in my opening post, I expected this to be a big and heavy tool, but it feels much lighter than I thought it would.
@kkokkolis said:
Very nice.
If somebody wants just one out of the frony plier based multitool, should he choose this over any of the original Gerbers?I can't help you with that my friend, the only Gerber I own is my old Mr. Pinchy, and I think it wouldn't be fair to Gerber to compare that one with the OHT, I'm sure someone around here has an OHT and a recent Gerber, like the MP400 or MP600 for example.
-
Perhaps you could stick some 'opposite' velcro on the exposed part?
-
@Syncop8r said:
Perhaps you could stick some 'opposite' velcro on the exposed part?Maybe I should go to the local army surplus store to see if they have a small velcro patch to cover it, or maybe use a small piece of bicycle inner tube that I can pull over the closure flap (and the velcro).
The velcro isn't a problem right now, but I can see how it would get quite dirty when used in the outdoors. I'm going to see if I can find a way to cover it ;).
-
@kkokkolis said:
If somebody wants just one out of the frony plier based multitool, should he choose this over any of the original Gerbers?Definately, yes.
-
There is one bit of annoying design with the OHT. That little twist lock sometimes gets engaged without purposefully doing so and then you rip your fingers apart trying to slide the pliers open. That has happened to me twice so far. I wished they had kept thing simple and got away with that little locking feature personally.
Happy to hear you like your copy of it.

-
Allow me to add my voice to the chorus and state these pictures are outstanding!
Two suggestions concerning this tool.In order to avoid any conflict between the tool and the drainage hole in the LM sheath,you can insert the tool handle down so it straddles the hole and avoids contact.
The second suggestion concerns the BO finish on this tool.I've found that using a good grade of wax keeps the finish from wearing as quickly than without.I've used Renaissance Wax for years on most of my collectibles and it performs admirably.I've recently been experimenting with a good grade of auto wax,such as McGuires Cranuba Wax, and have discovered this also works really well for preserving the BO finish.Be careful with the auto wax as most have some kind of abrasives.So select a wax based upon this factor.
-
Despite the stubby tools I like the looks of the OHT a lot. I think I'd rather get a flicky Gerber first though.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login