CRKT Zilla-Tool Jr.
-
It sure is nice to see all the new gadgets from CRKT these days. Last year saw the introduction of their very first multitools, the Guppie and the Zilla-Tool, and this year they've came out with even more. The Li'l Guppie, the Zilla-Tool Jr, the Lumabiner, and the Get-A-Way Driver are all new for 2008. In addition, we got a look at the Extrik-8-R rescue tool and the little Ashworth Turtle knives, both of which Def was particularly smitten with.

Of them all though, the one that catches my fancy is the Zilla-Tool Jr. Much as I like the rounded contours and basic features of the original Zilla, the darn thing is more than I want to carry on most occasions. (In other words, sometimes you can just have too much tool!) The masterminds at the CRKT i.d. Works developement team listened to and read about the feedback on the original, and responded with a drastic weight loss program. The result is the Zilla-Tool Jr, an exact scale replica of its big older brother.


And by exact scale, I do mean <u>exact!</u> Nearly every detail is the same, only smaller. The Junior is a scientifically-calculated 82% of the length, 82% of the width, and 82% of the thickness as compared to the original. Why 82 percent? Because that size reduction is what the i.d. Works gurus determined would achieve an approximate 50% reduction in weight. That's right, the Zilla Junior weighs about half as much as the Zilla-Tool does. (By the way, this same 82%-size-equals-50%-weight formula was used on the Li'l Guppie as well.)
I really like the result of this scale down effort. The original fit my hand well enough, but the Junior fits in my pocket, which means I'm far more likely to have it with me when I need it. And it really doesn't seem as if the utility of the pliers or the knife was compromised that much.
The only unfortunate consequence was the bits and bit driver, previously standard 1/4' hex, are now a special .205" size. (about 5mm, which means even the little 4mm bits from a Victorinox Cybertool will not work) The i.d. Works guys considered leaving the hex receptacle at 1/4" on the Zilla Junior, but finally elected to scale down the hex so as to still fit the bits into now-smaller carrying slots in the handle. Included with the Junior are two bits, both single-ended; a standard flathead and a standard phillips.
(Before you ask, I forgot to inquire about spare bit availability or special bits like torx or hex. Just now sent off an email to our CRKT contact. Hopefully we'll see a quick reply)
CRKT has somewhat addressed the bit size problem by making an adapter available that allows standard 1/4" bits to be used in the Zilla-Junior. As it happens, this same adapter is standard equipment on the Get-A-Way Driver, another new tool for 2008. I'll link to a review of it shortly, but here are a couple pics so you get the idea:


It seems to me that the two of these devices clipped together with the Get-A-Way's carabiner would make a great team.
Almost forgot to mention: the Zilla-Tool Jr is available with either matte stainless finish or black teflon on the metal. Both versions come with black Zytel handles.

-
I never got a Zilla-Tool because I thought it was just to big for me to carry, but the Jr looks about the right size. Does that get-away-driver have a ratchet function?
-
@prime77 said:
I never got a Zilla-Tool because I thought it was just to big for me to carry, but the Jr looks about the right size. Does that get-away-driver have a ratchet function?No ratchet on the Get-A-Way, but I'm thinking we got the right people's attention with our suggestions. That would certainly make a neat tool into a great tool. :)
-
"Zilla Tool Jr."
Now, I'm fairly sure "Zilla" means "Shoots Nuclear Rays from Eyes", either that or Big.
So the Big Tool Small...
Kinda dumb...
-
I am still really fond of this tool. Any indications as to when this will be made available?
-
Well besides the size of the Zilla I like it. Now that they seem to have a better proportion on it it is just better. However, Is the phillips still a number two or did they go smaller?
-
I like it!
I'm actually glad they scaled down the bit driver, keeps the tool in propotion. It would like odd if it had two big bits hanging from the sides.
-
-
@hawkchucker said:
.......Is the phillips still a number two or did they go smaller?I'm not sure about which "number" the phillips screwdriver is. The whole bit is smaller than a 1/4" bit of course. It seemed as if the "driver" portion of the bit was smaller too. :-\
-
I am still really fond of this tool. Any indications as to when this will be made available?
March/April of this year is what we were told. The CRKT people were adamant that the delivery delays of last year's Zilla and Guppie would not be repeated with this year's new tools.
So May then yeah. :P
-
Well I hope it is a number 2 but I think I would still get one anyway. Overall I think the Zilla is a winner, and making it a tad smaller even more of one!
-
I don't like the Speed-holes, but for a Minimalist tool, I like it by looks over Leatherman's Skeletool.
having small gropers makes a smaller tool only a good thing in my books.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login