Off-Brand Challenge - ETHEREALICER - Böker City Tool / SWIZA D04
-
Boring few days, but I promise some interesting tests...
If I had to describe the tool in smileys it wood look like this:
Blade:

Scissors:

Small screwdriver / Finger maimer:

Large Flat: NA
Lanyard Ring:

Glass Breaker:

Scales: NA
Pocket-Clip:

-
Did You test the cock screw?

-
-
Did You test the cock screw?

Yes, the mini-screwdriver from Victorinox does not fit...
Also, I'm so used to pioneers that I tend to forget the backside tools. All I really can say ATM is that the awl seems to be pretty good, of course the position is very limiting.
-
Day IIX: Yesterday, all my troubles seemed so far away...
Got to pack 3 and unpack one package. Still not a fan of the scissors, they had huge trouble with the padded envelopes. This weekend I will hopefully test the scissors on a tin can, lets see if it can match the mighty Classic scissors.


-
Day 1001 part A: ORANJE
Have to spray a box orange to pack some goodies from the Netherlands. The large flat was too big, so I used the TERROR-claw. It is at an awkward angle and not very suitable for prying, but then there was no real challenge here.

-
Day 9 B: Deliciousness
More food preparation today. This might well be the best blade in an MT at least when it comes to food preparation. I love Böker for their blades, and that is by far what is best about this tool.
Cutting onions, cheese, chorizo, pepper and olives
Mixing everything together
Cutting the dough
Delicious




-
Day 9 C: Enjoying the fruits of your labour.
First time I used the bottle opener. And its... meh... It does the job but it has very poor grip, so you need to be careful.

-
-
:D
-
You sir, convinced me not to buy the boker mt.
For the money there are better things i can buy for my edc. -
@anditsgone said:
You sir, convinced me not to buy the boker mt.
For the money there are better things i can buy for my edc.I will probably get the City Tool 1 (Blade only), that is how good the blade is. As for the rest, I will not give my final assessment yet, but yeah... it won't get a recommendation.
-
Day 10 or so: An AWLful lot of work
Got a new computer and wanted to fix an USB hub to the back of my screen (I have a wooden frame there, that holds the speakers and the head-phone charger). The new Computer is a nifty Intel NUC gets mounted on the underside of my desk.
The awl works very well, of course the back layer location makes it a bit awlkward to use. I also think the spring could be a tad stronger.
Mounting plate and installed PC.
Some hooks to fix the cables too...
Sound system, wireless headphones, printer, 3 USB-Hub (2 with their own power supply), 2 external disks with their own power, charging station for flashlights and such, video-cable and power for the PC. Adds up to a lot of cables :D
The whole setup.



-
Day 10 beta: Screw this!
Baseline Pioneer Flat-Screwdriver: I tested my ability (and to have something to directly compare to) with the Pioneer. Needles to say, it was a breeze putting a screw in with that fine tool.
With the City-Tool I had more problems, slipped of quite a bit and was wondering why.
While the Pioneer is almost completely perpendicular to the screwdriver edge, the City-Tool is at an angle. I think this is something you probably will get used to.
-
Day 10, or was it 11

Did some light cutting tests with the TERROR-Blade
Cutting of a cable organizer that would only have been in the way. Chewed through that easily.
Got an old bed-linen to slice open. As you can see, the cut from the main-blade is a lot smoother, the serrated blade had a bit of trouble with the elastic material.Cutting through the seam shows the same result, much smoother cut with the main blade (right side) than with the serrated thingy.


-
I was really hoping that the scissors wouldn't suck so bad, still the one I found the more attractive was the single bladed one and it seems to perform beautifully. Looking forward for the future posts.
-
@WWW said:
I was really hoping that the scissors wouldn't suck so bad, still the one I found the more attractive was the single bladed one and it seems to perform beautifully. Looking forward for the future posts.Of all SAKs, MTs I've ever held, this might be my all time favorite blade.
It's obvious that Böker is a blade manufacturer, because that part they got down.
Spoiler to the final thoughts: If they work on the scissors and on that rescue-blade thingy, this tool could be a winner. -
Just noticed that the tip of the awl is bent... I know my desk is hard, but that is no-good.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
