Off-Brand Challenge - ETHEREALICER - Böker City Tool / SWIZA D04
-
-
:D
-
You sir, convinced me not to buy the boker mt.
For the money there are better things i can buy for my edc. -
@anditsgone said:
You sir, convinced me not to buy the boker mt.
For the money there are better things i can buy for my edc.I will probably get the City Tool 1 (Blade only), that is how good the blade is. As for the rest, I will not give my final assessment yet, but yeah... it won't get a recommendation.
-
Day 10 or so: An AWLful lot of work
Got a new computer and wanted to fix an USB hub to the back of my screen (I have a wooden frame there, that holds the speakers and the head-phone charger). The new Computer is a nifty Intel NUC gets mounted on the underside of my desk.
The awl works very well, of course the back layer location makes it a bit awlkward to use. I also think the spring could be a tad stronger.
Mounting plate and installed PC.
Some hooks to fix the cables too...
Sound system, wireless headphones, printer, 3 USB-Hub (2 with their own power supply), 2 external disks with their own power, charging station for flashlights and such, video-cable and power for the PC. Adds up to a lot of cables :D
The whole setup.



-
Day 10 beta: Screw this!
Baseline Pioneer Flat-Screwdriver: I tested my ability (and to have something to directly compare to) with the Pioneer. Needles to say, it was a breeze putting a screw in with that fine tool.
With the City-Tool I had more problems, slipped of quite a bit and was wondering why.
While the Pioneer is almost completely perpendicular to the screwdriver edge, the City-Tool is at an angle. I think this is something you probably will get used to.
-
Day 10, or was it 11

Did some light cutting tests with the TERROR-Blade
Cutting of a cable organizer that would only have been in the way. Chewed through that easily.
Got an old bed-linen to slice open. As you can see, the cut from the main-blade is a lot smoother, the serrated blade had a bit of trouble with the elastic material.Cutting through the seam shows the same result, much smoother cut with the main blade (right side) than with the serrated thingy.


-
I was really hoping that the scissors wouldn't suck so bad, still the one I found the more attractive was the single bladed one and it seems to perform beautifully. Looking forward for the future posts.
-
@WWW said:
I was really hoping that the scissors wouldn't suck so bad, still the one I found the more attractive was the single bladed one and it seems to perform beautifully. Looking forward for the future posts.Of all SAKs, MTs I've ever held, this might be my all time favorite blade.
It's obvious that Böker is a blade manufacturer, because that part they got down.
Spoiler to the final thoughts: If they work on the scissors and on that rescue-blade thingy, this tool could be a winner. -
Just noticed that the tip of the awl is bent... I know my desk is hard, but that is no-good.

-
Like many other tools in the market, it could be great with a few tweaks. Some flashlight manufacturers seem to be more aware of forums, reviews and etc. And try to improve based on clients feedback, I understand the cost of tooling and such but with minor improvements they could end up with a much better tool that would sell much more (IMO).
-
Day ?: To can or not to can, that is the challenge.
*Sure, the can does not need an opener but where is the fun in that. And as the City Tool does not offer one, I had to look for alternatives. First up is the blade *
That was easy :D
I cannot see any damage to the edge. Except for some a scratches in the polished sides.


-
The awl punched some holes, no further damage visible to the awls tip.
Another easy win. That scissor is really good at medium to heavy tasks. Sadly it became a little unhinged and bending it back was almost to easy (that scissors is just a tad on the soft side). The ege also degrade quite a bit.

-
@Etherealicer said:
I will probably get the City Tool 1 (Blade only), that is how good the blade is. As for the rest, I will not give my final assessment yet, but yeah... it won't get a recommendation.The 1 is a real winner I think. A well-made, modern sodbuster for a good price.
-
I will probably get the City Tool 1 (Blade only), that is how good the blade is. As for the rest, I will not give my final assessment yet, but yeah... it won't get a recommendation.
The 1 is a real winner I think. A well-made, modern sodbuster for a good price.
Honestly, #1 is probably the best at the moment, but if Böker works on that tool line it can be great.
-
I did a lot of cardboard cutting today (sorry no pictures). The blade that has not been sharpened yet, but has suffered quite some abuse still was doing OK. But OK is not enough, so I sharpened it a bit and it now cut like nothing again.
I might have mentioned it before, but I do love this blade :P
For me it has the perfect shape for a multitude of tasks. With its hollow grind its excellent for cutting. This feels much more like a premium blade than the one on my Charge. For me this is the best MT blade currently available. In fact despite not being OHO and not locking, this is my 2nd favorite blade (close behind another Böker blade).The City Tool frame is very similar in size when compared to a 91mm SAK, so where did they find the space for that extra wide blade?
Simple, the blade layer does not have any backlayer-tools and if you look carefully, the 4th pin (which I think exists but is hidden, so this is to be taken with care) does not go through the blade-layer.

-
Comparison shots of the Böker City Tool Blade with other MTs:
Be careful, both Charge and Surge are 1cm back!
The blade without tool is from a MP-600...



-
Bit of a scare today, the scissor spring was incredibly weak (see how much play it has in the picture). Anyway, figured out what the problem was. When I took off the pocket-clip yesterday I put the screw back in and apparently tied it to tightly. Loosing that screw restored the scissor spring. So, while everything is good again I dislike the fact that the clip is on that critical screw.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

