Woodsmans Owners Club
-
@Gareth said:
Oooops, here's a club I missed. :-[ Long time fan and owner though.
Like Mags I had to make my own but it's well worth it.
Great scales too Gareth!
I'm going to mod mine to swap the small blade with an inline awl supplied by Hiraethus. Once my wife is back on her feet and I have some time again.
-
@kmanct3 said:
I'm lucky enough to have 3 , and still always looking for more,*** if I could only have 1 SAK hands down this would be it***. It's the perfect combination to me and wish it would be in production again. Once I awhile you find them on Ebay.I feel the same way. Has the perfect set of tools I use most. Closest I've seen currently being made is the Evolution 23, and wish they had an S23 variant with a locking blade. I like the idea of a metal frame on the magnifier. However, its length consumes the entire layer. Move its small driver tip to the fingernail file, shorten the magnifier and make its lens bigger, and put a Phillips in opposite it. Then it would be just about perfect . . . an Evo version of the older Woodsman that didn't have the hook, straight pin or small driver on the bottom.

John
-
The Marly Outdoorsman is the same knife with the addition of the multipurpose fishscaler. :D

-
@ebarberena said:
The only thing that denotes this a a spacial run is the model number in the cardboard box: 1.6713P15.This SAK was made to celebrate Father's Day in Mexico. They did a special BO main blade Hunstsman last year. I don't know if they did something special before that. I'll find out.
Thanks for this info!!!! I just received one in the mail and was asking about it over in the "latest SAK thread"
/post/1228862
-
@magentus said:
Great posts John
The Woodsman continues to be a popular model so I'm wondering why it's been discontinued. I haven't been openly EDC'ing mine since xmas as my wife and daughter bought me a Huntsman. I really miss the mag glass and philips so I've secretly been pocket carrying the Greenwood so I don't appear ungrateful. It's still my favourite SAK 

Don't forget that the Huntsman Lite is still around and has a nigh identical tool selection. I'd guess that the feel these two SAKs are too similar to have them both out at the same time.

-
Don't forget the Mountaineer Lite for the file fans. :D

-
I put together three more. I put new Plus scales on one because I wanted to use an old pen as a needle case. The pen no longer wrote so I thought it was empty...turns out there was still enough ink inside to make a big mess when I cut the nib off ::)

-
@Spork, Lord of Lime Jello! said:
I put together three more. I put new Plus scales on one because I wanted to use an old pen as a needle case. The pen no longer wrote so I thought it was empty...turns out there was still enough ink inside to make a big mess when I cut the nib off ::)That looks awesome. And it has my favorite scale color, Ruby [emoji1303]
Sent from my electronic multi-tool.
-
An old topic - but this BNIB Woodsman just arrived with beautiful ruby scales (photo also shows BNIB Explorer Plus that just arrived). Has 3rd version of magnifier with full tool set on the back layer.

A traditional red Woodsman I acquired earlier this year. It's a very functional journeyman color compared to the ruby. Other than scales color, it's identical in tools and proof marks.

My oldest Woodsman that I bought new in Germany circa 1978-1980. Been very difficult to date from available tool data. It has the gray first version magnifier with long Phillips opposite, fluted corkscrew, scissors screw and no groove for scissors spring, "V" on the blade tang same size as the rest of "Victorinox" and back of blade is thicker, key ring in the spacer for small pen blade (versus part of the opener spring), corkscrew and awl without sewing eye on back layer, but no hook or fine screwdriver. Scales are original and do not have the straight pin hole. Getting a micro-driver to fit into the fluted corkscrew was not easy (that tool didn't exist when I bought it). Obviously was not made for one. Pulling the differences between this old one and the ones above from memory. There may be more. I've replaced the scissors spring several times over the first decade or so of ownership, but not that I recall for at least the last two decades. They used to break at the hole where they were press fitted into the scissors handle. Not just this Woodsman but on several 58mm Classic as well. Always used the same method to drift the tiny part of the old spring out and press fit the new one in. I'm concluding Victorinox improved the spring metallurgy to make it more durable, perhaps the shape slightly as well (always had the "folded" U-shape springs). I still keep a few large and small springs.

John
-
Aaahhh, the mighty Woodsman. Indeed a very useful model, old or new, and I too don't understand why it is not made anymore. Of course the modern Huntsman is a old Woodsman with a new name and the old Huntsman is no more. But the modern Woodsman with the mag and IP is nice.
My collection today:
- Top left-my newest....84mm from the later 40's I believe. Not a drawer queen, this one has been used for right around 70 years and is still going. No T&T or bail.
- Top right-91mm version from the late 40's....again, a user for ~ 70 years but going strong....this one does have a bail and T&T.....tweezers have a nickle-silver head. Liners on both of the 40's models seem to be nickle-silver also and they are heavy for their size.
- Bottom left-84mm from the 60's, very austere, no bail, no T&T, just function.
- Bottom right-84mm from the 60's, this one has a bail, but no T&T.
- Bottom middle-modern 91mm with magnifier. Has the sewing eye, but no hook or fine screwdriver. Does have the rivet in the scissors. A very handy SAK.
Hopefully they will make these again......

max

-
Nice collection Boo-Nizzle

Here's mine I modded - The Greenwood:
WP_20160811_008 by magpie2112, on Flickr -
@magentus said:
Nice collection Boo-Nizzle
Here's mine I modded - The Greenwood:
WP_20160811_008 by magpie2112, on FlickrArghhhh, not fair. There are those that have an inline awl on their non-Alox SAKs and those that don't.....guess which group I belong to..........😞
Very nice.......

-
Nice collection Boo-Nizzle

Here's mine I modded - The Greenwood:
WP_20160811_008 by magpie2112, on FlickrArghhhh, not fair. There are those that have an inline awl on their non-Alox SAKs and those that don't.....guess which group I belong to..........😞
Very nice.......

Ta- I Luuuurve it. As mods go it's pretty easy - only one pin to remove and the awl slips in nicely. The original Greenwood mod was my first so I was a bit loath to do it again but it worked out smashingly.
-
This is a great thread guys! I've had the urge to pick up an Explorer but honestly like this layout even better.
-
@Barry Rowland said:
This is a great thread guys! I've had the urge to pick up an Explorer but honestly like this layout even better.Gonna get one Barry?

-
Nice collection Boo-Nizzle

Here's mine I modded - The Greenwood:
WP_20160811_008 by magpie2112, on FlickrArghhhh, not fair. There are those that have an inline awl on their non-Alox SAKs and those that don't.....guess which group I belong to..........😞
Very nice.......

Ta- I Luuuurve it. As mods go it's pretty easy - only one pin to remove and the awl slips in nicely. The original Greenwood mod was my first so I was a bit loath to do it again but it worked out smashingly.
Well that settles it, my 1st mod will be adding an inline awl to "something".....it's your fault. 😜
Barry.....woodsaw or metal saw (Modeler) doesn't add hardly any thickness to the Explorer, even though it adds a layer.
-
NIce one Boo-Nizzle! Can't wait to see pics

-
Nice collection Boo-Nizzle

Here's mine I modded - The Greenwood:
WP_20160811_008 by magpie2112, on FlickrArghhhh, not fair. There are those that have an inline awl on their non-Alox SAKs and those that don't.....guess which group I belong to..........😞
Very nice.......

Ta- I Luuuurve it. As mods go it's pretty easy - only one pin to remove and the awl slips in nicely. The original Greenwood mod was my first so I was a bit loath to do it again but it worked out smashingly.
Well that settles it, my 1st mod will be adding an inline awl to "something".....it's your fault. 😜
Barry.....woodsaw or metal saw (Modeler) doesn't add hardly any thickness to the Explorer, even though it adds a layer.
That awl mod is very, very tempting! Looks great!!
Had been thinking about a Modeler myself; would be a nice Explorer enhancement to put the metal saw and awl in it. Would have to find the organ donors for it.
-
I am, whether it's modding an Explorer or hopefully finding one. I jumped on the Bay and there was only one up for sale. I really like that layout...reminds me of everything that would make the Huntsman perfect! I was on the path to picking up an Explorer yesterday when I found this thread and really took a liking to them!
-
Well I just joined the club! Waiting for mine to arrive....I can hardly wait!! :ahhh :ahhh

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login