Crescent Toolzall Electrician Pro
-
Well the first review wasn't that bad so I thought I would try another. Any input is greatly appreciated. Some of the pics turned out a little better (different background). So here goes.
Where to begin? Except for the Leatherman Squirt E4 I believe that this may be the only tool I know of with a wire stripping tool head.
The tool itself

This tool is a Bear and Son Cutlery Bear Jaws Electrician that has been rebranded by Crescent to a Toolzall Electrician Pro.
This is a 4 inch tool with a wire stipping head. The tools in it are as follow it has a serrated/plain blade combo, 2 straight screwdrivers, a phillips head screwdriver, a file, a saw, a can/bottle opener, a ruler and a lanyard ring (if you count that?) and all the tools lock and are outside opening which is a very good thing. The handles are also very comfortable to use when using the wire stripping head. Good solid tool with solid design.
The Plier head

Let's start by talking about the wire stripping head. The tool specifically says to only cut copper with it. It has a wire cutter as with any standard plier based multi. It can strip wire from 10 gauge down to 20 gauge or 2.6 mm to 0.80 mm wire. Two hole that it says are for bending wire and on the tip has a small tip that can be used as pliers.
The blade

The blade that comes with the EP is a combo serrated/plain edge knife blade. Personally I don't care for this type of blade. It seems to be the only blade that they put on any of there tools that only have 1 blade in them. It can handle most cutting tasks and I guess that is what they are going for(the most versatility). The problem is it is only a mediocre blade for both types of cutting. But as I said it is a serviceable tool.
The screwdrivers

The EP has 2 straight drivers and 1 phillips head driver. The 2 straight drivers are nothing special they get the job done as most drivers of this type do, but the phillips driver is very well built and has a very good tip on the end. I like the phillips on this tool it seems to be a very good quality driver.
The file

Now to the file. It is a three sided file with smooth on 1 side and course on the other side. Since it is a Crescent brand tool one would think that it should have a Nicholson file on it since they are both owned by the same company. This is not the case though. The file is fine don't get me wrong it can be used for most filing applications, but for me though I like a little more filing surface it goes to the tip which is a plus, but doesn't go very far down the body itself.
The saw

Well back on a good note. The saw is a tool that shines in this multi. It is a very aggressive cutting saw (it has fewer teeth than typical Leatherman/Vic saws which means more aggressive) that cuts on both a push and pull stroke. Very effective cutting tool.
The can/bottle opener

The can/bottle opener is pretty much a standard design. It seems as though it would be capable of opening can and bottles pretty much the same as a Leatherman or Vic SAK.
The ruler

The ruler has both standard and metric measurement's each are on there respective sides and seems to be engraved very well.
The lanyard ring

I don't know if you count it or not but it's there it is a fold out type lanyard ring that takes up a space in my opinion. I would have preferred to have seen another tool in it's place perhaps an awl. Some people like them so they put them in I guess.
Locking Tabs

All the tools lock in this model, the odd thing is how they came up to unlock them. You can always unlock them the same way as you do the Super Tool but they have these little flaps that stick out on each side that you push in when you have a tool out and want to unlock it. It works effectively but when the tool is closed they stick out a bit. Just seems like an odd way to unlock tools.
Pros
I like the tool overall it has several useful tools. The plier head is something not normally seen on a multi and they put it in there with very little problem. It is very robust, smooth opening, plus all tools are outside opening and it seems built like a tank. In my opinion it is a great tool.
Cons
The knife blade seems only semi useful (of course this is only my opinion) and the unlock tabs get in the way a bit. The file is also lacking a bit of filing surface. Plus it also suffers from tool clumping
That's my two cents worth thanks for reading. I will take advice so please if you see something wrong tell me. The pics are a little better this time at least I think.
-
Nice review. I'd love to see more tools with wire-stripper heads like that.

-
@NeitherExtreme said:
Nice review. I'd love to see more tools with wire-stripper heads like that.
I know go figure why there aren't any other full sized tools with that type of head ??? Maybe they don't think that it would sell or something :(
-
That's a nifty tool! Thanks for the review.

-
Nice review there, the pictures did come out better. I need to work on my pics as well.

-
Nice one mate :), you seem to be getting a knack for this

-
Your tool is so different from mine!
I have the same model, Bear & Son branded.
I don't have the unlocking tool tabs.
Also, I have the combo edge blade, but I also have a serrated sheepsfoot instead of the saw. I want a saw!
And, even after sending it in to get it worked on, my pliers head is still really loose. They might have ground down the screw that kept it from fully closing, but they didn't tighten it.
Sigh. I really wanted to love this tool.
-
Nice job. Does that tool come with a Crimper? If so I think it is a great little design and a great tool!
-
Interesting tool that. :)
Thanks for the review.

-
@gafftapegreenia said:
Your tool is so different from mine!I have the same model, Bear & Son branded.
I don't have the unlocking tool tabs.
Also, I have the combo edge blade, but I also have a serrated sheepsfoot instead of the saw. I want a saw!
And, even after sending it in to get it worked on, my pliers head is still really loose. They might have ground down the screw that kept it from fully closing, but they didn't tighten it.
Sigh. I really wanted to love this tool.
So do the tools lock or not? Yeah the saw is one of the better tools in it :-\ Sorry to say I haven't used it enough to tell if the head is gonna become loose in time if it does I'll let you know

-
@hawkchucker said:
Nice job. Does that tool come with a Crimper? If so I think it is a great little design and a great tool!Sorry to say unless it is a poorly cast one in the plier head similar to the Super Tool's I can't really tell. I suppose you could use it as a crimper though, but it being an electrician tool they should have incorporated one :-. Other than that it is a great tool

-
Nice one Ponch
:D -
Another fine write up Poncho! 8)
I too would like to see this type of plier head used on more multitools. Maybe a more modern version of it would be better. The Electrician Bear Jaws is still listed on their site, but it has been around for a long while.
-
Excellent review. Poncho!
-
I have the earlier version of that tool the PST type one. Also does your wire strippers have a lot of play? Mine have a lot compared to my Radio Shack Leatherman.
-
Nice tool, I have the exact same one. Re-wired my garage with this and it was a solid performer.
I didn't like how the release tabs protruded from the closed tool so I filed them down at the point where they contact the lock and now they sit flush with the handles.
Apparently Cresent made another version of this which included a robertson (square drive) screwdriver. I tried locating one but couldn't find any.great review.
-
Welcome to the forum mate :)
-
@Micky d said:
Welcome to the forum mate :)What he said :D Welcome

-
Welcome.

-
Thanks guys - glad to be onboard.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login