Gerber Suspension
-
Actually Dave, it's not the <u>pliers</u> on the Suspension that I find to be too thick, it's the <u>handle</u> section. The plier jaws themselves, even with the spring mechanism, are no thicker than most multitool pliers.
But the handles are unnecessarily fat in my opinion. Pictured below is the Suspension next to an old PST. Both tools have four various blades in each handle. But the Suspension is much wider.
And look at all those spacer washers! (red arrows) Why so many? I think Gerber should either make the whole tool skinnier, or add a fifth blade to each handle instead of all those spacers.
~Bob

-
Wow... that is a pretty fat tool...
Do you have any other comparison shots of it with other tools to get a better idea of length, size etc? At almost 9 ounces (about 240g if my math is right) that's not exactly a lightweight...
Def
-
I hope it was well discounted Bob, I would not be a happy bunny if I had paid full price for that although it will be of interest for your collection.
Mind I wonder if that Wharncliff blade with a proper thumb stud would fit my Recoil. Is it the cutting edge that is 21/8" or the whole blade? Might make a future project if it is the cutting edge.Dave
-
@damota said:
As an afterthought are the in handle tools the same fitting as other Gerbers?At first I didn't think so, but upon closer inspection, I think the Suspension blades would interchange with other Gerber tools,including those from the 600 series.
I'm 90% sure. Can't be 100% sure without actually tearing it apart and trying it though.@damota said:
I hope it was well discounted Bob, I would not be a happy bunny if I had paid full price for that although it will be of interest for your collection.
Mind I wonder if that Wharncliff blade with a proper thumb stud would fit my Recoil. Is it the cutting edge that is 21/8" or the whole blade?The Wharncliff is my favorite blade shape too. On the Suspension, the blade protrudes 2-1/8" from the tool body, while the sharp cutting edge itself measures a bit over 1-3/4"
~Bob

-
@J-sews said:
And look at all those spacer washers! (red arrows) Why so many? I think Gerber should either make the whole tool skinnier, or add a fifth blade to each handle instead of all those spacers.~Bob
Found this on a picture search on Google, Bob. Although it is the scissor side of the tool, it looks as if they may have reduced the blades and put in thicker washers. The opposite to your wish's.
Dave

-
Yes I agree. That photo looks exactly like the tool I have in my hand. Actually, in a way, this side is even more insightful of the manufacturing techniques. You see, on this side of the tool, instead of thick spacers, they have piled a bunch of spring "wave washers" between each blade. That tells me they are trying to fill up some slop in their assembly.
-
I wanted a new toy today & stopped by Target to see if they had settled out their tool selection since re-doing it recently. So I bought a Suspension for the heck of it. (The Crux was $40 & the Suspension was $30 even thought they're basically the same too.) There isn't much to add to what Bob said above.
My only comment would be that it's hard to get your fingernail in to the slot to open the implements without breaking a nail (I'm a guitarist, for Pete's sake), & that the slotted screwdriver is too small for real work. Oh, & there's no file. Otherwise it was okay for a new toy at $30.
Here's a (bad) cellphone photo of the selection at my current Target now.
.jpg)
-
I am always tempted by the Suspension when I go to Canadian Tire, but it's around $50 and that seems a little much. $30 sounds abotu right to me too!
Def
-
@damota said:
Looks simular to the tools they make for Winchester. The thumb stud on the Freeman is cast with paint on the surface on mine the back is just bare metal. Afraid it is not my cup of tea.Dave
Dave, you are right the Gerber Suspension and the Winchester Winframe look very similar, interesting :D

-
@J-sews said:
Good:
Spring loaded pliers
Long length of screwdrivers
All blades lock
Titanium nitride coating for wear resistanceNot so good:
Handle cut-outs serve no purpose, and do not make the tool any lighter
Knife blades are quite short
Tool handles are much too fatThanks for an excellent review and pics, J-sews.
Earlier this week I was at Lowes getting supplies for yardwork and impulsively grabbed a Gerber Suspension.
After playing around with it for a few days, I thought I'd add my observations to this thread.
First off, I think it's a decent value for 30 bucks, offering lots of capability in a medium-sized, highly ergonomic package. Time will tell how durable the Suspension is or isn't, but Gerber is pretty good at dealing with warranty issues.
I want to address each of J-sews negative points:
"Handle cut-outs serve no purpose, and do not make the tool any lighter"
-
Cut outs enable the handles to be wider without increasing the weight and the wider handles are a good thing.
-
Cut outs enable operator to see the four outside edge tools at a glance (Wharncliff, serrated blade, saw, and scissors) which speeds up opening the tool you want out of those four commonly used tools.
-Cut outs facilitate handling by improving my grip on this tool, resulting in much better grippiness than my smooth Leatherman tools.
"Knife blades are quite short"
-The blades and saw could be longer, however I do like the blades on this tool.
The thumbstuds are great, making quick access to the Wharncliff and serrated blades a snap. The Wharncliff is much more suitable for precision work than the longer spear-point blades of my Leatherman tools. The serrated sheepsfoot may be short, but it cuts great, easily slicing through thick cardboard, power cable insulation, and rope in my tests so far.
"Tool handles are much too fat"
-Here I have to disagree completely.
I love the fat handles of the Suspension, because they improve the ergonomics of the pliers. The pliers feel about as good to me as any regular pliers and the spring function is great.
Immensely better ergonomics than my Leatherman tools. I can concentrate on using the pliers, rather than fighting with the pliers as I do on my Leatherman tools. Unlike my Leatherman tools, I can squeeze down hard without discomfort because of the fat, curved handles. (I do have fairly large hands - if you have smaller hands the Suspension's ergonomics might not work as well for you.)
Wrapping up, I think the Suspension is a solid value. Performance wise the Suspension stands head and shoulders above my old Leatherman tools.
Finally, it comes with a great sheath. Shaped to fit the varying width of the Suspension, made of lined and padded black cordura with a flap which seals with velcro, it is capable of riding vertically or horizontally on a belt. With the sheath riding horizontally, the extra width of the Suspension is no bother to me at all.
.
-
-
You know what they say about one man's treasure! It's always great to hear differing opinions on various tools. I have a very different opinion on tools than another prominent member and it's neat to read our reviews of the same tools because he'll love it and I'll hate it! Reading the two reviews together, you have to check to make certain that it is the same tool we are both writing about.
Multitools are like pizzas- very few people like exactly the same thing!
Def
-
I would love to hear ringzero's opinions on the Gerber Radius, you don't fancy getting yourself one, do you? ???
Dave

-
You make some valid counterpoints ringzero, and I appreciate hearing them. I will concede that the handle cutouts on the Suspension allow quick blade identification, (although the small picture icons etched on each handle do the same thing.) As regards the overall thickness of the handles, my perspective is biased because of my small hands. I can appreciate your preference for a larger tool with more to grab onto.
And I wholeheartedly agree with your opinion that the Suspension is a good value for the money. The only remaining unknown in my mind is in regards to durability. I don't use mine often enough to judge how well it will hold up. Are those cast aluminum handles with all the cutouts strong enough to withstand heavy usage?
-
No Bob! Don't ban him! He didn't mean to disagree with you! Really!

Def
-
Hehe...there's only one person in my house who is ALWAYS right.....and it sure as heck isn't me! :P
-
Well with that many women in the house it's a wonder if you could ever be right on anything! :P
Def
-
I'm still in shock that someone would disagree with Bob's expert opinion :o
Seriously though, now I want to pick up a Gerber suspension to see who I agree with. Ugh, being a member of this forum costs me too much money :)

-
@damota said:
I would love to hear ringzero's opinions on the Gerber Radius, you don't fancy getting yourself one, do you? ???Well damota, I've never examined a Radius. But, judging from the pic you provided, it looks like it doesn't offer much in the way of tools given its size. So, it doesn't really appeal to me.
I'm not a multitool collector like some of you guys.
I'm merely a user, who is often frustrated by bad ergonomics on some of the multitools I try to use to accomplish various tasks.
.
-
@J-sews said:
As regards the overall thickness of the handles, my perspective is biased because of my small hands. I can appreciate your preference for a larger tool with more to grab onto.Your perspective is completely valid. Just as I was about to post, I realized that people with smaller hands might have an entirely different perspective on the Suspension's ergonomics. So I added a disclaimer to that effect.
@J-sews said:
The only remaining unknown in my mind is in regards to durability....Are those cast aluminum handles with all the cutouts strong enough to withstand heavy usage?Perhaps you have a different version of the Suspension than mine?
A magnet will stick to my Suspension's handles no matter where I apply it, so they appear to be entirely made of some ferrous metal.
I'm guessing the handles are some type of steel, under a Titanium Nitride coat.
.
-
ringzero
I too am a user not a collector but I like the sliding action especially the MP600 setup. As you liked the Suspension I was just wondering how you would find the Radius's thick grip but I agree it is a bit short on it's usefulness.
Two different internet dealers I have talked to over the phone have said they sell more of the Suspension than any other multi tool so Gerber have got an appealing design in that tool that is selling (at least in those 2 stores in the UK). Mind 1 of them does not carry any Leatherman stuff and haven't for over a year or so.Dave
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login