Gerber Suspension
-
I am always tempted by the Suspension when I go to Canadian Tire, but it's around $50 and that seems a little much. $30 sounds abotu right to me too!
Def
-
@damota said:
Looks simular to the tools they make for Winchester. The thumb stud on the Freeman is cast with paint on the surface on mine the back is just bare metal. Afraid it is not my cup of tea.Dave
Dave, you are right the Gerber Suspension and the Winchester Winframe look very similar, interesting :D

-
@J-sews said:
Good:
Spring loaded pliers
Long length of screwdrivers
All blades lock
Titanium nitride coating for wear resistanceNot so good:
Handle cut-outs serve no purpose, and do not make the tool any lighter
Knife blades are quite short
Tool handles are much too fatThanks for an excellent review and pics, J-sews.
Earlier this week I was at Lowes getting supplies for yardwork and impulsively grabbed a Gerber Suspension.
After playing around with it for a few days, I thought I'd add my observations to this thread.
First off, I think it's a decent value for 30 bucks, offering lots of capability in a medium-sized, highly ergonomic package. Time will tell how durable the Suspension is or isn't, but Gerber is pretty good at dealing with warranty issues.
I want to address each of J-sews negative points:
"Handle cut-outs serve no purpose, and do not make the tool any lighter"
-
Cut outs enable the handles to be wider without increasing the weight and the wider handles are a good thing.
-
Cut outs enable operator to see the four outside edge tools at a glance (Wharncliff, serrated blade, saw, and scissors) which speeds up opening the tool you want out of those four commonly used tools.
-Cut outs facilitate handling by improving my grip on this tool, resulting in much better grippiness than my smooth Leatherman tools.
"Knife blades are quite short"
-The blades and saw could be longer, however I do like the blades on this tool.
The thumbstuds are great, making quick access to the Wharncliff and serrated blades a snap. The Wharncliff is much more suitable for precision work than the longer spear-point blades of my Leatherman tools. The serrated sheepsfoot may be short, but it cuts great, easily slicing through thick cardboard, power cable insulation, and rope in my tests so far.
"Tool handles are much too fat"
-Here I have to disagree completely.
I love the fat handles of the Suspension, because they improve the ergonomics of the pliers. The pliers feel about as good to me as any regular pliers and the spring function is great.
Immensely better ergonomics than my Leatherman tools. I can concentrate on using the pliers, rather than fighting with the pliers as I do on my Leatherman tools. Unlike my Leatherman tools, I can squeeze down hard without discomfort because of the fat, curved handles. (I do have fairly large hands - if you have smaller hands the Suspension's ergonomics might not work as well for you.)
Wrapping up, I think the Suspension is a solid value. Performance wise the Suspension stands head and shoulders above my old Leatherman tools.
Finally, it comes with a great sheath. Shaped to fit the varying width of the Suspension, made of lined and padded black cordura with a flap which seals with velcro, it is capable of riding vertically or horizontally on a belt. With the sheath riding horizontally, the extra width of the Suspension is no bother to me at all.
.
-
-
You know what they say about one man's treasure! It's always great to hear differing opinions on various tools. I have a very different opinion on tools than another prominent member and it's neat to read our reviews of the same tools because he'll love it and I'll hate it! Reading the two reviews together, you have to check to make certain that it is the same tool we are both writing about.
Multitools are like pizzas- very few people like exactly the same thing!
Def
-
I would love to hear ringzero's opinions on the Gerber Radius, you don't fancy getting yourself one, do you? ???
Dave

-
You make some valid counterpoints ringzero, and I appreciate hearing them. I will concede that the handle cutouts on the Suspension allow quick blade identification, (although the small picture icons etched on each handle do the same thing.) As regards the overall thickness of the handles, my perspective is biased because of my small hands. I can appreciate your preference for a larger tool with more to grab onto.
And I wholeheartedly agree with your opinion that the Suspension is a good value for the money. The only remaining unknown in my mind is in regards to durability. I don't use mine often enough to judge how well it will hold up. Are those cast aluminum handles with all the cutouts strong enough to withstand heavy usage?
-
No Bob! Don't ban him! He didn't mean to disagree with you! Really!

Def
-
Hehe...there's only one person in my house who is ALWAYS right.....and it sure as heck isn't me! :P
-
Well with that many women in the house it's a wonder if you could ever be right on anything! :P
Def
-
I'm still in shock that someone would disagree with Bob's expert opinion :o
Seriously though, now I want to pick up a Gerber suspension to see who I agree with. Ugh, being a member of this forum costs me too much money :)

-
@damota said:
I would love to hear ringzero's opinions on the Gerber Radius, you don't fancy getting yourself one, do you? ???Well damota, I've never examined a Radius. But, judging from the pic you provided, it looks like it doesn't offer much in the way of tools given its size. So, it doesn't really appeal to me.
I'm not a multitool collector like some of you guys.
I'm merely a user, who is often frustrated by bad ergonomics on some of the multitools I try to use to accomplish various tasks.
.
-
@J-sews said:
As regards the overall thickness of the handles, my perspective is biased because of my small hands. I can appreciate your preference for a larger tool with more to grab onto.Your perspective is completely valid. Just as I was about to post, I realized that people with smaller hands might have an entirely different perspective on the Suspension's ergonomics. So I added a disclaimer to that effect.
@J-sews said:
The only remaining unknown in my mind is in regards to durability....Are those cast aluminum handles with all the cutouts strong enough to withstand heavy usage?Perhaps you have a different version of the Suspension than mine?
A magnet will stick to my Suspension's handles no matter where I apply it, so they appear to be entirely made of some ferrous metal.
I'm guessing the handles are some type of steel, under a Titanium Nitride coat.
.
-
ringzero
I too am a user not a collector but I like the sliding action especially the MP600 setup. As you liked the Suspension I was just wondering how you would find the Radius's thick grip but I agree it is a bit short on it's usefulness.
Two different internet dealers I have talked to over the phone have said they sell more of the Suspension than any other multi tool so Gerber have got an appealing design in that tool that is selling (at least in those 2 stores in the UK). Mind 1 of them does not carry any Leatherman stuff and haven't for over a year or so.Dave
-
At the prices the UK dealers are asking I am not surprised! I visited a UK dealer (won't say who) last week and was astounded! They are offering MSRP in pounds as a discount price. A multi that is listed here for $100 usually sells on websites for $70, but over there they are listed at 100 pounds! And given the difference between the value of the pound and the US dollar right now I am amazed!
It might be cheaper for you to get a standby flight to New York or Toronto, pick a few up, and fly home!
Def
-
@Defender said:
At the prices the UK dealers are asking I am not surprised! I visited a UK dealer (won't say who) last week and was astounded! They are offering MSRP in pounds as a discount price. A multi that is listed here for $100 usually sells on websites for $70, but over there they are listed at 100 pounds! And given the difference between the value of the pound and the US dollar right now I am amazed!It might be cheaper for you to get a standby flight to New York or Toronto, pick a few up, and fly home!
Def
We get hammered with VAT and import duty if we buy anything over a certain price (I forget how much I think it is £18). For years the real exchange rate we pay is about £1 to the $1 by the time it is for sale in the shops.
The internet stores are a bit cheaper because they are often run as a shed in the back garden type of thing.Dave
-
@damota said:
Two different internet dealers I have talked to over the phone have said they sell more of the Suspension than any other multi tool so Gerber have got an appealing design in that tool that is selling (at least in those 2 stores in the UK). Mind 1 of them does not carry any Leatherman stuff and haven't for over a year or so....DaveAt the Lowes store where I got my Suspension, it was priced right in the middle of the multitool offerings.
There was some generic brand multi (packaging had outdoor scenes and its brand name was outdoorsy) that was priced at less than 10 bucks.
There was a package deal with Kobalt brand multi plus Kobalt lockback knife for 17 bucks, IIRC.
(Both of these cheaper multis were non-locking, inside opening LM PST clones. Someone wrote a review on this site that said the Kobalt brand multi is actually a decent, well-made tool.)
There was the Gerber Clutch for 18 bucks.
There was the Gerber Suspension for 30 bucks.
There were a few models of SOG multis, the cheapest of which was 60 bucks, the others 70 and 85 bucks, IIRC.
Guessing that Lowes probably sells more of the Kobalt multi than anything else, with the Suspension maybe the number two or number three seller. The SOGs probably sell much more slowly.
.
-
I can understand the shops being a bit on the pricey side, and I can understand the benefit of paying a bit higher price to get something locally vs sight unseen from a website, but really, it seems insanely high. The 1:1 exchange is ludicrous really, especially when looking at online dealers. Geographic location is secondary on the 'net and I really don't see how those dealers can compete with places like EDCDepot, Felinevet, Knifecenter and so on. At least the brick & mortar stores have the benefit of being able to see the tool first and instant gratification.
I think if I was there I'd strongly consider buying everything from the US... which is kind of what I do now anyway!
Def
-
@J-sews said:
The only remaining unknown in my mind is in regards to durability....Are those cast aluminum handles with all the cutouts strong enough to withstand heavy usage?Perhaps you have a different version of the Suspension than mine?
A magnet will stick to my Suspension's handles no matter where I apply it, so they appear to be entirely made of some ferrous metal.
I'm guessing the handles are some type of steel, under a Titanium Nitride coat.
Oops, you are correct sir! I never checked mine with a magnet. The Suspension design so closely resembles the earlier 700 and 800 Legend models that I just assumed it had aluminum handles as well. My mistake. -
And just to clarify my position about the Suspension, I think it is a fine tool for the money, nothing wrong with it really. But like damota, I happen to like the thinner, more condensed packaging on the Gerber 600 series better.
-
I couldn't stand the suspense about not knowing who I agreed with... so, I've got a Suspension on the way :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login