Things are getting a bit quiet around here....
-
Could it be as simple as higher end steels for our tools? Lets start with SAK mods. Lots of modding going on and to me I would spend 200 on a SAK mod with Vic steel. Sorry, call me steel snobby ;). What about blades in nice steel with MTO tang stamp?
Same goes for Leatherman tools. The few options include getting a donor tool with ungraded steel and TTC blades. Same idea with the SAK blade and MTO tang stamp.
Next idea is along the lines of what Metro did. We got tools and so we need to carry them. We've seen a plethora of sheaths come out. Guys want to carry everything in their sheaths yet they be super slim. Not sure however if there is a big enough gap for any really new ideas

Now as far as a tool is concerned. The SAK is not something I'd personally try to emulate. The MT however...... Loki was onto something with his wrenches. Tofty also had some interesting ideas with regards to accessories. I'd still love to see a ratchet accessory. Recently we saw a new member do a hammer. At times I think a revolutionary MT would be incredible then, I realize how much RnD is involved. So why not then make the "lacking" time since we know the modders will snap them up.
I'd love to see a ferro rod attached to the pocket clip of our Waves/Charges. I'd like to see a ferro rod be able to be attached to the bit holder. Screwed in?
Scissors that can be added to the OHO Wave/Charge.
-
@Aloha said:
Could it be as simple as higher end steels for our tools? Lets start with SAK mods. Lots of modding going on and to me I would spend 200 on a SAK mod with Vic steel. Sorry, call me steel snobby ;). What about blades in nice steel with MTO tang stamp?Same goes for Leatherman tools. The few options include getting a donor tool with ungraded steel and TTC blades. Same idea with the SAK blade and MTO tang stamp.
Next idea is along the lines of what Metro did. We got tools and so we need to carry them. We've seen a plethora of sheaths come out. Guys want to carry everything in their sheaths yet they be super slim. Not sure however if there is a big enough gap for any really new ideas

Now as far as a tool is concerned. The SAK is not something I'd personally try to emulate. The MT however...... Loki was onto something with his wrenches. Tofty also had some interesting ideas with regards to accessories. I'd still love to see a ratchet accessory. Recently we saw a new member do a hammer. At times I think a revolutionary MT would be incredible then, I realize how much RnD is involved. So why not then make the "lacking" time since we know the modders will snap them up.
I'd love to see a ferro rod attached to the pocket clip of our Waves/Charges. I'd like to see a ferro rod be able to be attached to the bit holder. Screwed in?
Scissors that can be added to the OHO Wave/Charge.
I'd buy a better steel blade for my wave with Multitool.org on the tang (several , actually )
I missed out on the Pioneer so I'd be down with that again.
I'd go for MTO patches, Tshirts , one piece tools, and high quality fitted hats with our emblem on it. Like a team game worn baseball hat.
MTO Tilley's?

-
"Project" is a vague term. What do you mean? Planting 1000 trees? Getting a NASCAR vehicle on the track? Build a cabin in the woods? Sponsor a K9 rescue program?
I like some of the previous suggestions for new products, but I'm not sure that's what you were after.......
Whatever we chose to do, it has to have international appeal and merit.For product development, I'd offer up the idea of an MTo bandana. XL bandana in grey or OD or brown (no gang colors, please) with a herring bone pattern made of "Multitool.org" prints. After all, the bandana is one of the earliest multitools......
-
Like the idea with the bandana. Would also want one with “Swiss Army Knight” print!

-
-
@Aloha said:
Could it be as simple as higher end steels for our tools? Lets start with SAK mods. Lots of modding going on and to me I would spend 200 on a SAK mod with Vic steel. Sorry, call me steel snobby
. What about blades in nice steel with MTO tang stamp?Same goes for Leatherman tools. The few options include getting a donor tool with ungraded steel and TTC blades. Same idea with the SAK blade and MTO tang stamp.
Next idea is along the lines of what Metro did. We got tools and so we need to carry them. We've seen a plethora of sheaths come out. Guys want to carry everything in their sheaths yet they be super slim. Not sure however if there is a big enough gap for any really new ideas

Now as far as a tool is concerned. The SAK is not something I'd personally try to emulate. The MT however...... Loki was onto something with his wrenches. Tofty also had some interesting ideas with regards to accessories. I'd still love to see a ratchet accessory. Recently we saw a new member do a hammer. At times I think a revolutionary MT would be incredible then, I realize how much RnD is involved. So why not then make the "lacking" time since we know the modders will snap them up.
I'd love to see a ferro rod attached to the pocket clip of our Waves/Charges. I'd like to see a ferro rod be able to be attached to the bit holder. Screwed in?
Scissors that can be added to the OHO Wave/Charge.
I had been subscribing to many popular EDC/gear related IG accounts online, and after seeing literally thousands of pocket dumps, I think what I see most is some kind of sheath or carrying method in most IG posts. Personally, I think there is a big gap in Metro's offering, especially in-pocket options, and that is why many makers have risen in recent years. I think in-pocket organizer will continue to grow since most major cities/countries around the world are becoming less and less knife friendly, and carrying a big knife on belt sheath may become less popular as time progressed.
Right now the only two materials I see most often used for in-pocket organizer are condura and leather, and there is only one maker on Etsy is using sail mast which is ultra light weight and strong(but the design is average, and not too user friendly).
I am a big fan of sail mast because it is utterly weightless and thin, resilient, smooth(easy to pull/put gear back in) and breathable.
And about the new design:
What I like most about skinth/Metro offering is the 3d pocket, which is great for a regular folding knife(like BM griptilian) or a 3-4 layers SAK, but due to its smaller size, the options for pocket is limited, and it always rotate sideway in my cargo pants and render itself useless.

I love the larger size of Yellow Birch outfitters organizer, which naturally allows larger knife/tool to be carried. The slanted opening is brilliant and the field note pocket is great, since it will give structure to the whole organizer and keep it upright in the pocket. But their pocket is flat which really limits the carry of MT, and again only 2-3 pockets available.
Here are some current offerings from YBO:

I'd love to see is a lightweight sail mast in-pocket organizer which can host a field note at the very top middle compartment(which can keep the whole thing upright, especially in a cargo pocket), and one side with slanted, cascade of flat pockets in different sizes, while the other side with 2-3 slanted larger 3d pockets. So based on your tool selection of the day, you could have a wide variety of pockets to host them in.
-
@Nix said:
"Project" is a vague term. What do you mean? Planting 1000 trees? Getting a NASCAR vehicle on the track? Build a cabin in the woods? Sponsor a K9 rescue program?I like some of the previous suggestions for new products, but I'm not sure that's what you were after.......
Whatever we chose to do, it has to have international appeal and merit.For product development, I'd offer up the idea of an MTo bandana. XL bandana in grey or OD or brown (no gang colors, please) with a herring bone pattern made of "Multitool.org" prints. After all, the bandana is one of the earliest multitools......
That is a great and simple idea, and for whatever reason, everyone on IG nowadays always take a pocket dump picture with one as background
-
Personally, I am not a fan of pocket organizers. I just don’t like having chunky stuff in my pockets. I can see though why others like them.
A bandana on the other hand is very good in multitasking. Might be too “simple” though. Maybe Grant needs to share some of his ideas

-
I tried a pocket organizer. Too much weight in one area. Leatherman in sheath on belt, light in backpack, pen in shirt and notepad back pocket. Weight spread around instead of a central location. I do like the idea of having everything in one locale. It just doesn't work for me. I've seen recycled firefighter doing pocket organizers now.
Just image losing an organizer with all your goods in it. :ahhh :ahhh :ahhh
-
Doesn’t work for me either 
-
If we are going for the XL hanky/bandanna idea, may I suggest to have one side as 'show side'(pattern. motto, MTO signage, etc), while the other side may contain useful info? Such as some unit conversion table(mile <> km, oz <> g, cup <> oz, etc), Morse code, or suggestive use bandanna(impromptu water filter, arm sling, fuel, trail maker, pot holder, etc)
-
That is a good idea! I second that

-
Great idea comis.

-
@comis said:
If we are going for the XL hanky/bandanna idea, may I suggest to have one side as 'show side'(pattern. motto, MTO signage, etc), while the other side may contain useful info? Such as some unit conversion table(mile <> km, oz <> g, cup <> oz, etc), Morse code, or suggestive use bandanna(impromptu water filter, arm sling, fuel, trail maker, pot holder, etc)Great idea, comis.

-
@comis said:
If we are going for the XL hanky/bandanna idea, may I suggest to have one side as 'show side'(pattern. motto, MTO signage, etc), while the other side may contain useful info? Such as some unit conversion table(mile <> km, oz <> g, cup <> oz, etc), Morse code, or suggestive use bandanna(impromptu water filter, arm sling, fuel, trail maker, pot holder, etc)i agree , great idea!
Gonna keep an eye on this thread.

-
@Nix said:
"Project" is a vague term. What do you mean? Planting 1000 trees? Getting a NASCAR vehicle on the track? Build a cabin in the woods? Sponsor a K9 rescue program?Yes.

Ideally the project would be something realistically do-able with the resources and budget we are likely able to have available, either through member generated funding or perhaps something like a Kickstarter campaign. But, I am good with it being a NASCAR or planting a thousand trees too- anything that MTO Members can do to leave their mark on the industry and/or world, and be proud of.
@SirVicaLot said:
Maybe Grant needs to share some of his ideas

We'll get there.

Def
-
Great!
In that case, I'd encourage us to think about something that can be scaled down to local levels but have a unified theme. The tree-planting concept isn't as sexy as getting a Baja 1000 truck to cross the finish line, but it's something that would 1) be doable and permitted around the world, 2) can be done around the world as unified project, 3) make a positive impact on the world, and 4) is budget friendly (I think).
Buying the MTo island and building a visitor's cabin would, of course, be ideal. We'd need a good BBQ.
-
-
On that theme there are also benches than can be purchased for people sitting in areas. We have a lot here in my city that companies or individuals pay for. Trails and such I believe also do similar? One time cost in most cases.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login