EDC Bit Ratchets
-
@ReamerPunch said:
I received the Wiha mini ratchet.
So the pending reviews are of the Wiha, Rujoi flex-head, Klein, and Ovatt.I have both the Wiha and the Klein. Can't wait to hear your opinions on them

-
@ReamerPunch said:
I have decided not to get the Wiha one.
I am glad I decided to get the Wiha. The case is tiny for what it has. I got the TerminatorBlue go-box for $40, and two days later I saw it for $36. :o
Just excellent. Great ratchet, nice locking extension, amazing bit selection, and the tiny case is just sweet.
I am writing the review now. I do recommend this, of course. It is an excellent investment, and miles better than the cheap sets you will find on Amazon. -
Some great choices here and lots of great info, RP

-
A great set of reviews. Hope you don't need that surgery.
-
Thanks, guys!

It looks like I may not need the surgery, which is a huge relief. This is unrelated to my fractured toe, but when it rains, it pours, so what can you do.Question: Why are stubby bits not more of a thing?

I've come to appreciate the Mulwark ratchet more and more, because it comes with 19 bits, of which 13 are stubby bits. These are great. I know it's not that much of a job to just cut down standard bits, and I may end up doing it. Still, what's going on? Amazon has only one stubby bit set, and it's $112. I cannot find anything else. The next best thing is indeed the Mulwark ratchet. -
Here's a breakdown of the ratchets I have so far. Pending reviews are the Wiha, Rujoi flex-head, Ovatt, Klein.
Keep in mind that there are things that do not show up in here. The Titan costs $17, but comes with only two stubby bits. The GreaTalent also costs $17, but it comes with a case, and 36 S2 steel bits. For more information on accessories, ergonomics, fit and finish, etc, refer to the reviews. I am in the process of quantifying the subjective categories.

-
very interesting, as usual :)
-
Just received three more!

Wera Zyklop
Anex low profile ratchet
Jadeshay ratchetSo excited for these!


-

Ovatt Ratchet
(can also be found branded by Ashdel, Funfang, Hilitand, Omninmo, Utoolmart, Weytoll)Weight: 74g
Kit weight: 218g
Length: 105mm
Head width: 24mm
Head clearance with standard bit: 32mm (adds 7mm)
Teeth count: 60
Minimum swing arc: 6°
Bit retention: magnet
Extension bit retention: magnet
In-line driver: no
Bit material: Chromium-Vanadium steel
Handle material: Chromium-Vanadium steel
Price: $20 with 10 bits
Bits: Phillips 0 and 2, Slotted 3 and 6, Spanner 4 and 6, Triangle 2.3, Allen 5 and 6, Tri-wing 2Accessories
The Ovatt comes with ten bits, an extension, a plastic carrying case, and a zippered nylon pouch that has a clear plastic presentation side. The case sits in the pouch, with its belt clip exposed. The case can be removed from the pouch and used separately. The bits are stored in a fold-out holder, that is released with a latch. The bits are held in by friction, which is not much, but when this is closed, the bits cannot escape. The extension snaps into place, but the two tines that retain it are already white with stress, and do not inspire confidence. The part that houses the extension has a hole, so users can poke the holder from the underside to release it.
The bits include two spanner bits, a triangle bit, and a tri-wing bit. A little unusual to find such specialty bits in a ratchet kit that is targeted to the bike community.
Dimensions
The Ovatt is a little on the long side of edc ratchets, though certainly not by much. It is rather heavy, at 74g, currently at third place behind the Titan swivel-head at 78g and the Klein at 76g. The Ovatt has the widest head so far, at 24mm. It also adds 7mm to an inserted bit's clearance. All this may result in the Ovatt being just short of accessing a fastener in a tight spot.
Teeth Count
The Ovatt has 60 teeth, which is on the higher side. This gives it a minimum swing arc of six degrees for the head to engage the next tooth and turn a fastener. This would have been fine, but there are many other compact ratchets with much slimmer heads, with the same or even more teeth.Bit Retention
The Ovatt and its extension use magnets to hold bits in place. These are adequate for their purpose. They are not overly weak or strong.Bit compatibility
The ratchet socket is too shallow for double-ended bits to engage.
The extension it comes with is too deep for stubby bits. Double-ended bits will turn, but they barely engage, and have a lot of play.
Switch action
The switch is short but relatively thick. It sits and swings in its own little scallop. It has a good detent and does not seem to change positions when bumped accidentally, which itself is not easy to do.Ease of use
The Ovatt is long, thick, with a coke-bottle shape body. It is nicely rounded and comfortable to hold. It provides a decent amount of torque. It even has a lanyard hole so it can be tethered if needed. It has 60 teeth, which may come in handy if a fastener is in a tight spot. Still, the Ovatt has the widest head yet, so this may cause issues. The head also adds 7mm to a bit's clearance, so stubby bits may be needed to compensate.The knurled finger wheel is thin and much shorter in diameter than the ratchet head. As such, it is extremely difficult to spin it with your fingertips.
To access the bits, the latch mechanism must be pressed down. When doing this, the bit holder shoots open, and because the bits are held in with little friction, they can simply be catapulted across the room. Care must be taken to prevent the bit holder compartment from opening as violently as it does.

Construction Quality
Average. The Ovatt is an inexpensive tool and it shows. The ratchet body has dings, scratches, and imperfections all over. The ratchet mechanism has a lot of wobble in the head. The lanyard hole has a burred edge that will make quick work of cords.The bits are simply painted, and the paint did not survive one single screw.
The extension, much like the ratchet, is covered in dings and scratches.
The nylon sheath is single-stitched and the lining is stitched unevenly and crooked at places. There are already loose threads.
The plastic case is thin and there are stress marks already. The bit holder spring is too strong but the bit retention is very weak. There are burrs and imperfections as well.
Portability
A mixed bag. The case has a belt clip, and the nylon pouch will catch any components that manage to fall out of their spot when on the move. This happens often. Having two mediocre containers working together is an inefficient and inelegant solution. It seems like the nylon pouch was an afterthought, to counter the mediocre plastic case. Any loose components will still remain in the pouch, but that means little. Users will have to open the pouch carefully and be mindful of any items ready to drop.Of course, it does not help that the bit holder shoots out, launching bits away.
The ratchet is a good thickness for multi-tool pouch side-sleeves. It will fit in edc pouches. Tethering will require clips, as the lanyard hole will wear through cords.

Value
A prime example of "you get what you pay for", the Ovatt ratchet is inexpensive and it shows. This was bought for $20, and for that much, it is disappointing. The price has dipped at as low as $14, which is far more appropriate.Conclusion
Mixed bags are not worth it in most cases, but at least there are some positives. The Ovatt is not a mixed bag. The only positives are the 60 teeth, and that it comes with 10 bits and an extension. Poor fit and finish; a below average holder and nylon pouch; black paint for the bits, that did not survive a single screw; ratchet and extension covered in imperfections; a lanyard hole that will wear down any cord that can fit through it; a knurled finger wheel that cannot be turned with fingers; the widest ratchet head we have seen thus far.Does it work? Yes, it does work. You can put bits in it, and use it to turn screws. Is that good? Well, it's not bad, but it was a given that a bit ratchet would be able to use bits. It is thick, long, and round, so it does not do a half-bad job. Still, there is more to a bit ratchet than ratcheting bits. Compared to other ratchets we have seen, the Ovatt offers less than most. Sure, some ratchets have fewer teeth, but even then, they cost less, weighed less, and came in a much better set. Are you actually in the market for a cheap, unbranded bit ratchet? Get the GreaTalent. It costs $17, and comes with 36 S2 steel bits, a nice flat plastic case, and it has a perfectly usable knurled wheel (actually one of the best so far). Not a good enough brand for you? Get the Bosch mini ratchet. It costs $20 too, and comes with 20 S2 steel impact-rated bits, four sockets, an extension, and a nice plastic case.
There are many better options out there, that cost less and offer more. I do not see any reason to recommend the Ovatt over anything else. If you have settled on the Ovatt, keep looking. Go back in this thread and find something else. Keep browsing Amazon. Something better will undoubtedly appear.
Much can be said about the Ovatt bit ratchet; very little will be favorable.
Pros
-High teeth count.
-Bits include spanner, triangle, and tri-point.Cons
-Heavy.
-Knurled finger wheel is hard to operate.
-Average fit and finish.
-Head adds a lot of length to bit.
-Low quality sheath and holder.
-Head is very wide.
-Bit holder compartment spring is too strong; shoots bits away when used.
-Lanyard hole is unfinished and sharp.If you liked this ratchet, you skipped the text and only looked at the pictures, didn't you? Also check out:
-
Damned, when I started reading the review, I thought "cool! that grey and orange case would match nicely with my Juice(s) S2 and Fiskars tools" ...
Then I followed along, got to the conclusion and ... "okay, not for me then"
not all reviewed tools can be good
@ReamerPunch said:
Just received three more!
Wera Zyklop
Anex low profile ratchet
Jadeshay ratchetSo excited for these!

So am I ! (mostly for the Wera, and maybe that blue boxed one, that wouldn't match with above mentioned tools
) -
-
Solid work. Looking for more. Keep going and Im sure to buy one...even though I don't need it.
Sent from my SM-A326U using Tapatalk
-
@m47mu74nt said:
Damned, when I started reading the review, I thought "cool! that grey and orange case would match nicely with my Juice(s) S2 and Fiskars tools" ...
Then I followed along, got to the conclusion and ... "okay, not for me then"
not all reviewed tools can be good
So am I ! (mostly for the Wera, and maybe that blue boxed one, that wouldn't match with above mentioned tools
)Not much orange on it anyway. :D
For an orange case, the Beta, Dewalt, or Gearwrench ones would be fine. That Beta box looks so nice. I wish it was readily available. I'd have reviewed it already.



The one with the blue case, wow. It has some nice things going for it. Very glad I found it able to be shipped to Australia.
-
The Wera Zyklop switch is a tiny Wera Zyklop. :D

-

Klein 65200 Ratchet
Weight: 76g
Length: 109mm
Head width: 20mm
Head clearance with standard bit: 35mm (adds 10mm)
Teeth count: 72
Minimum swing arc: 5°
Bit retention: spring and magnet
In-line driver: no
Bit material: Chromium-Vanadium steel
Handle material: Chromium-Vanadium steel
Price: $24 with 5 stubby bits
Bits: Phillips 1 and 2, Slotted 3/16" and 1/4", 1/4" square adapter
Features: 5/16" (8mm) nut driver, 7/8" (22mm) finger loop, knurled finger wheelAccessories
The Klein comes with four stubby bits, a stubby square adapter for sockets, and a tiny bit holder with five slots. The bits are not easy to remove from the bit holder. They are extremely tight, and since they are stubby, they do not have enough material to be grabbed.
Dimensions
The Klein is definitely a little long as far as edc ratchets go, coming in at 109mm. It is also the second heaviest, at 76 grams, behind the Titan swivel-head at 78 grams. The back of the ratchet head has a 5/16" (8mm) nut driver. This makes the head a little thick. The finger loop at the other end also flares out significantly.
Teeth Count
The head has 72 teeth, which is quite high. The ratchet has a minimum swing arc of five degrees for the head to engage the next tooth.Bit Retention
Unique to the Klein, the ratchet head has both a magnet and a spring to keep bits in place. Also, since the back of the head does not have a flush hole, bits can not be pushed from the back to aid removal.
Due to all this, bits are very difficult to remove. Stubby bits are impossible to remove with just fingers.A way to solve this is a small screw inserted through the back. With a bit inserted, the screw will be pushed back a little, but still held in place by the magnet. To remove any bit easily, simply pushing the screw in will disengage the bit from the magnet and spring.
It is always frustrating to have bits stay in the fastener or drop out of the ratchet, but in this case, the retention is unnecessarily strong.Bit compatibility
Double-ended bits do not engage and cannot be turned.
Leatherman bits do engage quite convincingly and can be used to great success. For best results, insert the bits so that the spring engages the bit's sides.
Switch action
The switch is very short and flat. It would be very difficult to have it accidentally bump against something and have the ratchet direction change. It has good retention, and it is very easy to operate.Ease of use
The knurled finger wheel protrudes enough from the head and it is the easiest wheel to operate so far. The ratchet is long and provides excellent torque. The stem is flat compared to the cylindrical ones of most ratchets. This helps with grip and comfort. The finger loop allows for various grip configurations.
The extreme bit retention becomes tiresome rather quickly, but this can be eliminated with a small screw to act as a quick-release button.
The head is narrow and has a high teeth count.
Due to the 5/16" nut driver on the back of the head, the head is arguably taller than is needs to be. It adds 10mm to an inserted bit's clearance, which is the second worst, behind the Titan swivel-head ratchet, which adds 13mm. Stubby bits will aid the Klein in reaching fasteners in tight spots, but it only comes with four, and removing them from the ratchet head requires metallic assistance.
Construction Quality
The Klein mini ratchet is well-made. Its mirror finish is consistent. The ratchet mechanism has good fitment in the head, with very little wobble. All edges are nicely rounded off. The logos and numbers are crisply etched on the body.Portability
Despite being a little long, and a little wide at one end, the Klein carries nicely, thanks to the finger loop. It can be stuffed in a pocket but retrieved easily. It can also accept the thickest of carabiners and cords to be hanged or even tethered to a belt or ring.Because the head is so tall, it does not fit multi-tool pouch side-sleeves. It may fit in a pocket organizer if the webbing is wide enough for the ratchet's head to make it through.

Value
At $24, it is a little sad that the Klein comes with a small bit holder and only five stubby bits. It is definitely a high quality tool, with some nice features, and a few we have not seen before.Conclusion
If nothing else, the Klein mini ratchet is interesting. It has both a magnet and a spring. It has a finger loop that is very useful. The head has a built-in 5/16" nut driver. It has a high teeth count and probably the best knurled finger wheel so far.Having the bit retention be this strong is curious. This is the common spring that is found in high quality mini ratchets, like the Topeak, Prestacycle, Wera, etc. This spring is perfectly capable of keeping bits in place. The magnet makes it harder to use.
The listings for this refer to it as a "slim profile ratchet" and mention its "low profile head". It will certainly reach fasteners in some tight spots, but the body is most definitely the least slim so far. The stem starts flaring out near the loop, and the loop itself flares out to 30mm. Also, because of the nut driver on the back of the head, and because the magnet itself is about 3mm thick, the head on its own is 20mm thick, and with a standard bit inserted the clearance is 35mm. This is probably why it comes with stubby bits, but even then, it comes with only four bits and a socket adapter. There are many other mini ratchets that have a much lower bit clearance.

Klein, Wera, Anex, Topeak, MulwarkIt would have been better if the Klein did not cost $24, or if it came with more accessories. The 5/16" (8mm) nut driver may be useful to some, but it increases the head's thickness and bit clearance significantly. Omitting it would have slimmed down the head, improving the bit clearance. It would have allowed the magnet to be flush with the back of the head, and add a magnetic pick up function.
The Klein ratchet is undoubtedly a high quality tool with a lot to offer. Not everyone needs some of its features. This is only recommended as long as the pros outweigh the cons for you.

Klein, Wera, Anex, Topeak, MulwarkPros
-Good quality.
-High teeth count.
-Excellent ergonomics.
-Finger loop allows various grips and tethering options.Cons
-Head adds 10mm to bit clearance.
-With no bit inserted, the head is 20mm thick.
-Comes with only 5 bits.
-One end is very wide due to finger loop.
-Bit removal is not easy.If you liked this ratchet, also check out:
-
Quite a nice one, but seems it was not meant for EDC but more for specific tasks with the nut driver side and such.
BUT put that awful Phillips screw down and use anything that is not a Phillips screw as a push button


[sorry, I hate these screws] -
Well, this was good timing. I guess that finger loop is even better than I thought.

https://www.youtube.com/watch?v=d4hsIF0KxXI -

Wiha Mini Ratchet Go-Box Set
Weight: 70g
Set weight: 298g
Length: 90mm
Head width: 17mm
Case length: 107mm
Case width: 40mm
Case height: 30mm
Head clearance with standard bit: 28mm (adds 3mm)
Teeth count: 72
Minimum swing arc: 5°
Bit retention: magnet
Extension bit retention: magnet and locking
In-line driver bit socket: no
Bit material: S2 Steel
Handle material: Chromium-Vanadium steel
Price: 40$ with 30 bits, locking extension, and metal case
Bits:
Phillips #1 x2, #2 x2, #3 x2
Pozidriv: 1, 2, 3
Robertson: 1, 2, 3
Allen: 1/8, 9/64, 5/32, 3/16, 7/32, 1/4
Allen: 3, 4, 5, 6
Torx: 10, 15, 20, 25, 27, 30, 40
1/4" square adapterAccessories
The Wiha Go-Box set comes with the mini ratchet, 29 impact-rated S2 steel bits, a square adapter for sockets, a locking bit extension, and a metal case. The case has a hard rubber insert that holds everything securely. The case is tall enough to hold the bits upright. The extension fits under the ratchet. Once closed, everything is rather silent. The contents will not rattle. Some wobbling is audible with extreme shaking, and the case will not open on accident. The bits are held in by friction, so they will survive the upside-down test, but the ratchet just sits in its spot, so it will fall out. Some basic care must be taken when opening the case.
The case is nicely made, with a long hinge pin. The pin seems to want to peek out of one end with multiple openings, so users may want to address this by slightly bending it or crimping the two hinge ends.
The main feature of the case is its size. For a case that holds a mini ratchet, an extension, and thirty bits, this is impressively compact. Nothing we have seen so far comes even close to how tiny the container is for how much it holds.
Dimensions
The Wiha mini ratchet is among the shortest so far, coming in at only 90mm. It is rather stocky though, at 70g. The head is 16mm wide, so quite slim. The head adds 3mm to an inserted bit.
The case is also worth mentioning. There is very little unused space. This case will fit comfortably in a pocket with room to spare, and will take very little real estate in a toolbag.
Teeth Count
The ratchet head has 72 teeth, which give a 5 degree minimum swing arc to engage the next tooth. This will help turn fasteners even if there is very little room to swing the ratchet.Bit Retention
The bits are held in with a magnet. The magnet is right in the sweet spot; not too weak to have bits get stuck on fasteners, but not strong enough to make bit removal a hassle.Bit compatibility
The ratchet cannot be used with double-ended bits. The head is too shallow for them to engage. Stubby bits are easy to remove thanks to the modest magnet and comparatively shallow slot.
Switch action
The Wiha has a rather large switch compared to other ratchets. It is a shorter version of the CyclingDeal ratchet switch, as the two ratchets share the same head. The shorter switch of the Wiha is a better approach. It is not as prone to bump onto things as its counterpart. It has a nice detent, and thank to its size, it is very easy to operate.Ease of use
The Wiha mini ratchet has a stocky body. Fingers are guided intuitively to its thin, flat stem, with the bulbous end acting as a stop. This arrangement locks the thumb and fingers onto the handle, providing excellent control and ergonomics. Of course, everything is chamfered nicely, and the ratchet feels wonderful in the hand.
There is a knurled wheel to aid with speed spinning for somewhat loose fasteners. This protrudes ever so slightly from the frame, making it very easy to grip and turn. The magnet holds bits securely, but removing them is very easy.The included extension has a magnet, but is also locking. Bits are inserted normally. To remove a bit, pull the collar back. The bit will be disengaged from the lock, but still held in with the magnet. This is a nice addition and something we have not seen so far. A standard extension would have sufficed, but a locking one is even better.
The case is held closed securely, but opens easily with one hand. Everything can be accessed with no issues. No extra tools needed. The bits are arranged in two rows of fifteen. The bits are impact-rated and made out of S2 steel. The selection is comprehensive, and even includes both Imperial and metric Allen bits. Of course, these are standard bits, and can be swapped with any, should the kit not include what users require.

Construction Quality
Wiha is among the most well-known tool brands, and it shows. Everything just exhibits quality and inspires confidence.
The ratchet, the extension, the bits, the case, everything has been finished professionally. Edges are precise, finishes are crisp and consistent. The bits provide excellent fitment in fasteners. There are no imperfections.Portability
The ratchet is short and with a streamlined body. Nothing really protrudes to make it unsuitable for edc pouches and the like. The hourglass body makes it fit nicely in multi-tool pouch side-sleeves. It is a bit heavy for its size, but definitely not a deal-breaker. It is also short enough to fit comfortably in an Altoids tin.For once, the case is also tiny. This is a nice change of pace, considering some bulky, space-wasting cases we've seen. This will take little space in a pocket or bag. Of course, 298g (10.5oz) is not exactly lightweight, but this is the most comprehensive and compact kit so far.

Value
At $40, this may seem expensive. It certainly is more expensive than many other kits, but a quick look at the whole kit will make things clearer. The ratchet is nice and short, with a high teeth count, knurled finger wheel, and great ergonomics. The bit selection is extensive, and made of S2 steel. The extension is locking. The case is metallic, and just as large as it has to be, with no space wasted. This is above and beyond what other kits offer. Quality tools will always cost more than the no-name tools of questionable materials and wishful performance.
This kit has dipped down to $32, so even better.Conclusion
It should be obvious that I recommend this. The ratchet has a high teeth count, knurled finger wheel, and great ergonomics. The extension is locking. The bits are impact-rated, S2 steel, and there are 29 of them, plus a socket adapter. The case is also wonderful, holding everything securely, while being all cute and tiny.Compared to other sets, this may seem overpriced, but even then, the comparison is unfair. The Wiha set is among the best sets available. Every component is of high quality. No other set so far comes close to how comprehensive and compact this set is.
Certainly, this set is not perfect. This thread is exploring edc ratchets, so this may not be the absolute best choice. It is still a good choice, though. The case is small enough for a day bag, and if you do not feel like carrying the whole set, the ratchet is the third shortest so far. If you are just looking for a ratchet and a few bits to put in your edc pouch, this may be overqualified. Nevertheless, a good tool deserves a mention for those looking.
Pros
-High teeth count.
-High construction quality.
-Great ergonomics.
-Massive selection of impact-rated, S2 steel bits, which include both imperial and metric Allen.
-Case is metallic and extremely compact.Cons
-The switch could be smaller.Nitpicks
-The Torx could be Tamper-proof.
-An inline driver would make it more versatile and reduce weight.If you liked this ratchet, also check out:
-
Finally saw some new ratchets added on Amazon.

-

Rujoi Flex-head bit ratchet
Weights
Ratchet: 69g
Extension: 33g
Set: 265gMax torque rating: 60 Nm / 44 ft lb
Length: 128mm (The Amazon listing says it is 100mm long. It is not. The seller reassured me it will be corrected).
Head width: 18mm
Head clearance with standard bit: 27mm (adds 2mm)
Teeth count: 60
Minimum swing arc: 6°
Bit retention: spring detent
In-line driver retention: magnet
Extension bit retention: magnet
Bit material: S2 steel
Handle material: Chromium-Vanadium steel
Price: 40$ with 12 bits, 1/4" square adapter, 3 sockets, extension, and case
Bits: Phillips 2, Torx 10/20/25/30, Allen 2/2.5/3/4/5/6/8, 1/4" square adapter
Sockets: 8mm, 9mm, 10mm
Flex-head positions: 15° incrementsAccessories
The Rujoi Flex-head ratchet comes with twelve S2 steel bits, a square adapter for sockets, three sockets, a long extension, and a hard nylon case.
The case is clam-shell with a zipper. One side has a foam insert, which has cut-outs for the ratchet, bits, sockets, and socket adapter. The other side has a mesh pocket that houses the extension. The pocket runs about half the length of the case.
Dimensions
At 128mm, this is the longest ratchet yet. It may not fit a small edc pouch. This exact head can be found on shorter ratchets. The head is 18mm, which is narrow enough. The head adds 2mm to an inserted bit's clearance. Quite good.
Teeth Count
The ratchet has 60 teeth. This is on the higher side, and it means the ratchet has a minimum swing arc of only six degrees to engage the next tooth.Bit Retention
The ratchet head has a retention spring, which is the same spring found on other high quality ratchets, like the Topeak, Prestacycle, Wera, etc.
The in-line driver has a magnet of above average strength.Bit compatibility
The ratchet is a nigh-pass-through design, so it works with most double-ended bits. For Leatherman bits, the spring has to engage their retention notches, so the bits do not fall out. Stubby bits are easy to remove, thanks to the hole in the back of the ratchet head. Bits can be pushed out enough for them to disengage the spring.
The in-line driver and extension driver are too shallow for double-ended bits. Leatherman bits engage but barely, and have too much flop from side to side to be used effectively. Stubby bits do not sink in but they are not particularly easy to remove.
Switch action
The switch is short and flat. It rests on a completely flat surface and has excellent detent. It does not get in the way of the flex-head pivot or the knurled wheel.As it is a locking flex-head ratchet, there is also a button. It protrudes 2mm from the frame and is spring-loaded. It is in the shape of a flat mushroom and sinks completely into the frame,with no grinding or jamming.
Ease of use
As a flex-head ratchet, the Rujoi offers a clear advantage compared to fixed head ratchets. The flex-head is locking and moves in 15° increments. Thank to the various positions of the head, this ratchet can access fasteners in confined spaces that fixed head ratchets could not.This ratchet happens to share its head with the Prestacycle T-handle ratchet. As such, the Rujoi can also accept the extension as a T-handle, and provide additional torque to the in-line driver.
As this is 128mm, users with large hands may find it easier to hold and use, compared to other much shorter ratchets, like the Ares, Topeak, or Wiha.
With 60 teeth, and a locking flex-head that is only 18mm wide, the Rujoi is very versatile and efficient.

Construction Quality
The Rujoi is a high quality tool. It is machined flawlessly. All surfaces and edges are crisp. The ratchet mechanism, the flex-head mechanism, the switch, the button, everything moves smoothly and precisely, with excellent tolerances. There are no imperfections, no pitting, no burrs, no unfinished spots. Construction quality is as high as it gets with these.Portability
Compared to other ratchets we have seen so far, this is the longest, and it has the longest extension as well. This may interfere with edc pouches. The Rujoi will not fit in pouches and tins other ratchets will. If length is an issue, this may not be the best option.
It does come with a nice case, that is not extremely bulky. Of course, the foam insert that holds everything in place leaves a lot of unused space. This can be mitigated by simply making more holes in the insert to accommodate more bits, or just removing the insert completely.

Value
This set costs $40. Certainly a lot, but also worth it.
One of the best ratchets we have seen so far was the Prestacycle T-handle ratchet. It is interesting to compare that to the Rujoi, since they both offer the T-handle configuration, and cost the exact same amount.
The Rujoi is first and foremost a locking flex-head ratchet, so this is already a massive advantage.
The Rujoi comes with a more versatile case, that can hold much more, and can also be used for anything else. The Prestacycle wallet is much more restrictive. The Prestacycle can be bought with the exact same case as the Rujoi, but then it will cost $10 more.
The Rujoi comes with S2 steel bits. The selection is the same as the Prestacycle, but its bits are Chromium-Vanadium.
The Rujoi also comes with three sockets and a socket adapter. Not a big advantage, but the Prestacycle did not come with any.
And the main feature of the Prestacycle is not sacrificed. The Rujoi can also accept the long extension as a T-handle.
The Prestacycle is still one of the best value ratchets we have seen, so the Rujoi is also one by default.Conclusion
Comparing the Rujoi to the Prestacycle was unavoidable. They share the same ratchet head, and they both accept long extensions for a T-handle configuration. And the Rujoi has the edge in pretty much all categories compared to the Prestacycle, except length.Even when looking at the Rujoi by itself, it still comes out on top. It is very well-made, with a great bit selection. The bits are made out of S2 steel. It also has a socket adapter and three sockets. It also comes with a long extension and a handy case. It is also a locking flex-head ratchet. This comes in handy for fasteners in awkward places. The Rujoi can also be used with pretty much any double-ended bit. Bits can be removed easily thanks to the hole in the back of the head. This is not a small deal, since we have seen many ratchets struggle with bit removal. The Rujoi adds only 2mm to a bit's clearance, and has a narrow head as well.
The Rujoi seems to cover all the bases as far as edc ratchets go. The features go on and on, and the only compromise is the increased length, and a seemingly high -but fair- price compared to others. This is nothing short of impressive. The Rujoi has no real disadvantages to speak of. It is one of the best deals around, putting other ratchets to shame. Highly recommended.
Pros
-Flex-head feature provides versatility.
-High quality.
-High number of teeth.
-T-handle configuration allows for additional torque.
-Nigh pass-though head works with all double-ended bits.
-Better grip for people with large hands.
-Excellent assortment of S2 steel bits.Cons
-Possibly a little too long for edc.If you liked this ratchet, also check out:
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


















































