EDC Bit Ratchets
-

Tone BR bit ratchet
(Toh-neh, not 'tone'; Short for Tonegawa)
Ratchet: BR
Extension: RDBH-065Weight: 54g or 1.9oz
BRS20C weight: 214g or 7.5oz
BRS20 weight: 249g or 8.8ozMax torque rating: 60 nm / 44 ft lb
Length: 87mm
Head width: 18mm
Head clearance with standard bit: 27mm (adds 2mm)
Teeth count: 60
Minimum swing arc: 6°
Bit retention: spring
Extension bit retention: magnet
In-line driver: no
Bit material: Chromium-Vanadium steel
Handle material: Chromium-Vanadium steel
Price: $34 with 20 bits, extension, case
Bits:
Phillips 2x#1, 2x#2, 2x#3,
Allen 4, 5, 6 ,8
TamperProof Torx 15, 20, 25, 30, 40
Slotted 5.5, 6, 8
Square socket drive adapterAccessories
The BRS20 set consists of the ratchet, 20 bits, extension, and plastic case with an integral belt clip.
The BRS20C set consists of the ratchet, twenty bits in two bit holders, an extension, a two-piece drill bit container and an aluminium Tone logo sticker.Also available are:
BR10S: ratchet, 10 bits in a bit holder and no case
BRS20MBK: ratchet, metallic case with 20 bits, extension, and magnitizer.The extension is magnetic. The magnet rides on an anvil which slides back and forth in the socket. Inserted bits rest on a step, and the magnet engages. The magnet can be disengaged by pulling it backwards. This helps remove bits, as the magnet is quite strong.
Each bit holder holds ten bits. The bits fit in tightly. The holders have no bit designations but the plastic case does. The bits themselves are marked with their size, and also branded "Tone".
Dimensions
The Tone ratchet shares the same head as the Wera Zyklop mini ratchet, and Prestacycle/Rujoi ratchets but without the T-handle capability.
It is also the same length as the Wera, at 87mm. The head is quite slim, at 18mm. It is also rather chunky for its length, at 54 grams.
Bottom right: 711L, Jackly, Tone, Wera, Hazet, Wiha, Stanley, Topeak, BGS, SK11, Klein, PrestacycleTeeth Count
With 60 teeth, and thus a 6 degree minimum arc swing, this is well above average. Working in tight spots should not be an issue.Bit Retention
This has the same spring seen on high-end ratchets, like the Prestacycle, Wera, Topeak, Klein etc. Bits are held in firmly, but can be removed easily, by pushing from the back of the ratchet head.Bit compatibility
Thanks to the hole in the ratchet slot, this is compatible with many double-ended bits, as long as one end is thin enough to pass through the hole. Leatherman bits fit nicely, and engage the spring properly.
The extension is deep enough to accommodate Leatherman bits and double-ended bits. In addition to this, and unlike most extensions, this can also work with stubby bits. Even though it is deep, the tips are still exposed and will engage their respective screws, and thanks to the feature of the magnet slide, the strong magnet can be disengaged from the stubby bits, making them easy to remove. This makes the extension the best in this thread so far, as usually extensions work well with either double-ended bits, or stubby bits, but not both.

Regular stubby, Steinwhale double-ended stubby, regular bit, double-ended 1" bit, Leatherman bit, regular double-ended bitSwitch action
The switch is also branded 'Tone" and can be operated very easily with a thumb. It is small and unobtrusive, and will not get bumped accidentally.Ease of use
The Tone has a lot of things going for it, making it very easy to use.
It has a nice, thin head but high teeth count, for those tight spots with limited swing.
There is also a knurled thumb wheel, to make quick work of somewhat loose fasteners. The switch is also easy to turn despite its modest size.
The narrow neck flares out to a bulbous end, making it easy to hold onto with a proper three-finger grip. The logo also offers traction on both sides.Of course, the nice extension matches the ratchet's high bit compatibility. The sliding magnet is a nice feature and one we have not seen yet. This extension is arguably the best in this thread. It works perfectly with regular bits, Leatherman and standard double-ended bits, regular stubby bits, and the Steinwhale stubby double-ended bits. Truly amazing.
A little detail that was noticed and appreciated straight away is that due to the magnet slide pin, the extension does not roll freely.
Construction Quality
The Tone is very well made. Pretty much everything about it exhibits quality, from the ratcheting head, to the Tone logo on the body. The finish is crisp and consistent throughout, the ratcheting mechanism works perfectly and has a negligible amount of wobble in the frame. The bits are branded "Tone" as well and fit perfectly in their respective screws. The extension has a so far unique feature that has been executed perfectly and the machining and feel of it are excellent.Portability
Portability was a priority in the design of this ratchet and the sets it comes in. The ratchet is short and will fit nicely in multi-tool pouch side-sleeves, edc pouches, mint tins, and even other ratchet cases. Thanks to the hole in the head, the ratchet can be clipped to other gear with a carabiner or quick-release clip.
The drill bit container the BRS20C set comes in is wonderfully compact. Everything fits in nicely and can be removed very easily. This will fit comfortably in a pocket, pouch, or bag.
The BRS20 case is quite larger than the drill bit container, but still relatively small, and about the same size as other ratchets that come in boxes, like the GreaTalent, Bosch, etc. This case has an integral belt clip so it doesn't have to go in a pocket. The clip has some flex, and it feels sturdy. The lid closes securely so it will not open accidentally.
Value
At $34, either set will be great value for money. The Tone ratchet has many great features and comes in nice, comprehensive, compact sets. The extension is really nice. The bits include Tamperproof Torx and Metric Allen bits.
Even on its own with no case, the ratchet is still a good investment. The Tone RDBH-065 extension goes for about $6 USD and is also an excellent stand-alone purchase.Conclusion
The Tone BR ratchet is one of the best ratchets we have seen, and this is three-fold.
The ratchet by itself is excellent. 60 teeth, well-made, compact, the hole in the head allows for double-ended bits as well as clipping, knurled wheel, good ergonomics; a wonderful assortment of features.
The sets it comes in are also excellent. Compact, comprehensive bit selection, the best extension we have seen so far, and even a variety of cases.
Lastly, the price makes it an excellent bargain. The Tone ratchet is essentially the same as the Wera Mini Zyklop, apart from the Kraftform handle. But the Wera will cost around $32 and only comes with a square socket adapter, whereas the Tone will cost about the same and come in a set with 20 bits, a great extension, and a case. The Tone ratchet is truly one of the best so far. This is highly recommended, in whichever set you happen to find.
Even if this ratchet does not meet your criteria, the extension is available as a stand-alone piece and is definitely worth it, no matter which bits you have.

Pros
-High quality.
-Comprehensive sets at amazing prices.
-Extremely high bit compatibility.
-BRS20C set comes in an extremely compact case.
-Bit extension has unmatched bit compatibility and is available on its own.Cons
-An inline driver would have made it just about perfect.
-Possibly a little too short for people with large hands.If you liked this ratchet, also check out:
-

*Killer thread, RP. *
-
Thanks!

The humble Mulwark. What a classic! :D -

711L Micro Ratchet
(Can also be found branded by Signet.
Same design as CROM and LaBear, but those have 60 teeth and are t-handle capable)Max torque rating: 30 nm / 22 ft lb
Weight: 19g
Length: 50mm
Head width: 15mm
Head clearance with standard bit: 25.5mm (adds 0.5 mm)
Teeth count: 52
Minimum swing arc: 7°
Bit retention: spring
In-line driver retention: magnet
Bit material: Chromium-Vanadium steel
Handle material: Chromium-Vanadium steel
Price: $20 alone, $24 with 8 bitsAccessories
The 711L ratchet can be found alone in a tin, or with a bit set for a few dollars more.
Dimensions
The 711L is truly microscopic, at only 50mm long and weighing a measly 19 grams. It has a narrow head, and adds 0.5 mm or less to a bit, depending on the bit.
Bottom right: 711L, Jackly, Tone, Wera, Hazet, Wiha, Stanley, Topeak, BGS, SK11, Klein, PrestacycleTeeth count
Much like the Topeak, Giant, PK Tools, etc, the 711L ratchet has 52 teeth, for 7 degrees minimum swing arc. Just excellent.Bit retention
Bits are held in the ratchet with a spring. The inline driving slot has a magnet. Retention is excellent.Bit compatibility
Stubby bits are not easy to remove from the in-line driving socket.
Standard double-sided bits and Leatherman bits can be used with the ratcheting head, as long as one end is thin enough to clear the hole in the back. Leatherman bits have to be inserted properly, with the spring engaging their retention notches.
Double-sided bits cannot be used in the in-line driver. They do not engage the sides, and thus cannot be turned.
Leatherman bits can be used, but they barely engage the sides and have a lot of play left and right.
Impact bits with the grooved neck do not engage the ratchet spring, so they will have a lot of play back and forth, but they do not fall out.
The double-ended stubby Steinwhale bits are a wonderful companion to this. They can be used in both ends and take very little space.Bits with a more rounded back sit flush with the ratchet head, allowing the clearance to be whatever the bit length is.

Switch action
The 711L has a small -arguably too small- and low-profile switch with good detent, so the action will not get reversed accidentally. The switch tail rests in a scalloped area, which guides the thumb left or right, to make operating the switch easy.Ease of use
Though small, the 711L ratchet retains the features of its kin. Knurled finger wheel, inline bit driver, 52 teeth. The length makes this a two-finger grip. The thin middle makes for a nice place to pinch with a thumb and finger.An extension or bit in the inline driver can be used to increase the length for more comfort and more torque. With a 50mm (2") extension, the 711L will be the same length as the Topeak, Giant, etc. It will perform essentially the same, with the added benefit of having an extension in virtually the same space that the Topeak would occupy on its own. And having an extension as an L configuration makes the 711L even easier to use.
The Steinwhale bits also fit the ratchet and regular extensions. Truly a match made in Heaven.
Construction Quality
Same excellent build quality of its taller siblings. Everything is polished, chamfered, smooth. Tolerances are tight, there is very little wobble in the ratchet head.Portability
Its main feature, the 711L ratchet is the tiniest yet. This is perfect for a keychain, thanks to the hole in the head. It will disappear in any pocket or purse, and can probably be added in any edc kit without the need to remove anything.
This is much slimmer and lighter than the other keychain ratchet already reviewed, the Jackly keychain ratchet, and of higher quality, and of course more expensive.
The tin it comes in can be used as a tiny bit kit. It fits the ratchet and a few bits, although it may rattle a little in a pocket.
Value
When first launched, this was $30 for just the ratchet and tin. It is now $20. It can be found for a few more dollars with bits. Definitely somewhat expensive, but arguably justified for such quality in such a tiny package.Conclusion
This should be familiar to some. It is essentially the Topeak head on the inline driver. It is the tiniest ratchet yet, and just about perfect for a keychain. This is the best option for lightweight edc where every gram counts. Despite its size, it is still a functioning ratchet, and a very good ratchet at that.
Its only drawback would be the limitations that come with a tool this small. This may be too small to manipulate effectively for people with larger hands, but this can be easily solved with a long bit or an extension in the inline driver.
Of course, this may seem somewhat expensive to some, especially when compared to ratchets with the same head and construction, like the PK Tools, Topeak, etc. If size limits allow for it, maybe a Topeak/Granite/Giant ratchet set would make more sense. Still, for what it is, the 711L ratchet is still an attractive option. It has gotten more affordable since launch, it will occupy the least amount of space from the ratchets we have seen so far, and it works just as well as larger ratchets.
Pros
-Perfect keychain ratchet; lightweight, short, hole in the head for attaching clip.
-Retains features of similar ratchets (inline driver, 52 teeth, knurled wheel, hole in head, great quality).
-Can be found from different brands, with bit kits and cases.
-Has an inline driver:
-Can drive inline.
-Can store a bit while on a keychain.
-Can store an extension or long bit and be the same length as the Topeak.Cons
-None.If you liked this ratchet, also check out:
-
I guess this could fit under this subject, pretty interesting, the “T” shape handles pull off and can be used as extensions either way, the same with the drive, so if you want a long ratchet, or if you want something small and will fit you can just use the main ratchet,, I still haven’t used it but I thought it was pretty cool..
JR
-
Zoyo Sports ratchet just in.
Comes with a drawstring bag and a holder.
Quite interesting. It's the length of the Topeak, but thicker, ever thicker than the Prestacycle ratchet.

-
LaBear folding ratchet
Engineer PZ-54
Blackburn Big Switch ratchet

-
Topeak, Blackburn, Zoyo, Prestacycle
The first three are the same length.
The Blackburn is the same thickness as the Prestacycle and has the same head as the Topeak.
The Zoyo is the thickest and has the same head thickness and teeth count as the Prestacycle (no T-handle capability)
-
This thread never disappoints

-
Brand new from 711L.
Imagine this with an inline driver. Mini flexhead t-handle.

Why is this t-handle? It doesn't have an inline driver. Why be T-handle?

-
Leatherman ratchet is in!

-
@ReamerPunch said:
Leatherman ratchet is in!Nice, i will eagerly wait your review on it. I havent pulled trigger to buy it yet since its bit pricey here and cant find justification to buy one cause i have Vic ratchet what can do most of my jobs.
-
@Antti Lammi said:
Nice, i will eagerly wait your review on it. I havent pulled trigger to buy it yet since its bit pricey here and cant find justification to buy one cause i have Vic ratchet what can do most of my jobs.I have written most of the review on it, and I can tell you now that your post sums the Leatherman ratchet adapter nicely. It is expensive, offers little justification to buy, and other regular right-angle bit ratchets cover most needs. I''ll take photos and post the review soon.
-
Wiha has many GoBox sets. Standard for $30.


-
There is a swivel-head with a fixed inline driver. So this is better than the Titan swivel-head. Branded AP (Astro Products).

-
Topeak has a different ratchet, but it comes with less and costs more than the regular one.


-
-

Hazet 2021SA Advent Calendar 2021 set / Hazet 863MHP ratchet
Warranty: Lifetime
Weight: 99g or 3.5oz
Set weight: 498g or 17.5oz
Length: 89mm
Head width: 21mm
Head clearance with standard bit: 26mm (adds 1mm)
Teeth count: 90
Minimum swing arc: 4°
Bit retention: spring
In-line driver retention: spring
Extension retention: magnet
Bit material: Chromium-Vanadium steel
Handle material: Chromium-Vanadium steel
Price: $186 with 18 bits, extension, 3 sockets, 3 wrench ends, and caseSockets (six-point): 8, 10, 13
Wrench ends: 8, 10, 13
Bits:
Phillips #1, #2,
Allen 3, 4, 5, 6
Torx 10, 15, 20, 25, 30, 40
Slotted 1.5, 4, 6.5
Square socket adapterAccessories
The Hazet 2021 Advent Calendar set contains an extension, socket adapter, three metric sockets, three wrench ends, and 17 bits.
All components are marked with the Hazet logo. The extension is a common impact magnetic extension.
The bits are color-coded.
The sockets have a double finish, dull and satin, divided by a knurled ring.
The three wrench ends are essentially half a wrench, with a 1/4" hex end. They fit into the ratchet or extension for added length. This is why the inline driver is so robust.The case is what Hazet calls a Smart Case. The base and top are hard plastic covered in a rubberized material, which provides traction.
The front of the lid displays the contents in silhouette with their respective sizes.
It has magnetic closure and all internals are held in the lid. While the contents survive the upside-down test, the case itself does not. The magnetic closure is not strong enough for how heavy the contents are, and if grabbed by the bottom half, the lid with all contents will swing open. Of course it can be treated as a conventional case, placing it contents-down.The rubberized part runs the full length of the base and lid, and acts like a smartphone wallet. The double-hinged rubber backing allows the lid to interlock at an angle with the base, to have the contents displayed in full view, while the base acts as a tray for parts.

Dimensions
At 89mm long, the Hazet ratchet is rather short. The head is 21mm, definitely on the wide side.
Bottom right: 711L, Jackly, Tone, Wera, Hazet, Wiha, Stanley, Topeak, BGS, SK11, Klein, PrestacycleTeeth Count
At 90 teeth, the Hazet ratchet shares the top of the list with the Titan swivel-head. It requires only 4 degrees of minimum swing arc, to engage a tooth and turn a fastener.Bit Retention
The ratchet has ring springs for the ratcheting end and inline driver. Retention is firm, but not over the top. Even stubby bits can be removed easily from both ends. The extension has a magnet that is a bit stronger than the springs.Bit compatibility
The ratcheting end has a smaller hole compared to other ratchets, like the Wera, Topeak, Ares, etc. This limits the amount of double-ended bits that can be used, because one end has to be very thin in order to use the other end. Stubby bits can be used just like regular bits.The inline driver is more accommodating. The 1/4" depth is excellent for regular and stubby bits. The interesting feature is that the 1/4" hole transitions to a 6mm hole, allowing for double-ended bits to also fit in perfectly. Leatherman bits work properly. Standard double-ended bits with ball detent also work fine, and even though the ball detent will not engage, the inline driver's ring spring will.
Even long, double-ended impact bits fit perfectly in the inline driver. The only other ratchet that can use these bits in the inline driver is the Victorinox ratchet.The extension is not deep enough for double-ended bits but stubby bits can be removed with no issue.

Switch action
The Hazet ratchet switch is quite larger compared to similar ratchets. The end of the switch protrudes upwards ever so slightly and is very easy to use, while tucked safely behind the head.Ease of use
With 90 teeth, the Hazet can work even in very confined spaces. The inline driver is also very useful and extremely robust, since it has to double as the wrench end extension. The thin neck and wide ends allow for a comfortable grip, locking the thumb and fingers around the handle. The switch is very easy to use as well.
The wrench ends can be used to some extent as stubby wrenches.
A knurled wheel would have been a nice feature to have, especially considering how much back drag this ratchet has. The resistance of the ratchet head when turning to engage a tooth is significant, and much more than any other ratchet so far. This means that for the ratchet to actually start ratcheting, the fastener has to be tighter compared to other ratchets.
The case can stand at an angle, making it a bit easier to identify and remove something. The base acts as a tray for spare parts, fasteners, etc.
Construction Quality
The Hazet ratchet is very well-made. The finish is consistent. The ratcheting action is smooth. Bits go in and out beautifully. The ratcheting mechanism has no gaps in the frame. The switch has no wobble in the frame. It is worth noting that this ratchet head is used for other models by Hazet, and a repair kit is available, as well as a 1/4" square drive.
The sockets and bits are also flawless. The wrench ends are a little inconsistent. The 10mm especially seems to be the worst, with quite obvious grind marks on the outer sides of the jaws.Portability
The hole in the head allows the ratchet to be clipped to other gear with a quick-release clip or thin carabiner. The inline driver makes the ratchet a little thicker compared to similar ratchets, but it still fits in multi-tool sheath side-sleeves, pen slots, and edc pouches. Being 89mm long, the Hazet ratchet can fit comfortably in an Altoids tin. At 99 grams, it is the heaviest ratchet yet. If you are looking for a lightweight option, this is not it.
The case is quite bulky and not suitable for edc. It will fit in a cargo pocket, but it weighs half a kilo or over a pound, so it will pull your pants down.
Value
Being a limited release and long discontinued complicates things. It is a premium set, with a good selection of accessories. The ratchet is well-made, it has 90 teeth, a nice inline driver, it is heavy duty. The case has some nice features as well. Hazet offers a lifetime warranty, so if you do manage to find this, you will be set.Conclusion
The Hazet 2021SA set is definitely interesting. It is by far the most expensive and hardest to find. The ratchet and case have some nice features. The set is extensive. It is high quality and has a lifetime warranty.It would not make much sense not to recommend the set. It is a very nice ratchet, with 90 teeth, great quality, a lifetime warranty, a nice inline driver, and extremely heavy-duty, probably the most rugged so far, and definitely the most robust inline driver in this thread.
It would not make much sense to recommend it either. It only came as part of the 2021 Advent Calendar set. The ratchet did not come in any other set or sold separately. The set has been discontinued for a long time, and no new stock will exist. It does appear to be available from Japan as unsold, old stock, so not impossible to find, but there are some hoops to be jumped through.
If you do find it, it may be all you need. Until you do, maybe get something else.

Pros
-Lifetime warranty.
-High quality.
-Heavy duty.
-90 teeth for only 4° minimum swing arc.
-Comprehensive set.
-Versatile case.Cons
-Expensive, limited release, and discontinued.
-Heavy ratchet and set.
-The socket and wrench sizes are the same.
-Quite high back drag.
-Magnetic closure on the case is not strong enough to keep it closed firmly.If you liked this ratchet, also check out:
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



















































