Leatherman MUT?
-
questiong, whats with the hole in plier head?

-
Hole? You mean where the wire cutter inserts go?
-
I think he means the 1 in the side
What is that there for ??? :D -
Not a clue ???
I am telling you guys, I need to stop looking at this tool. I really don't need one but it's drawing me to it every time I see it, it's just so damn sexy!
-
Is this tool designed specifically for the M4/AR? To be honest the so called weapons tools don't seem to be any kind of engineering break though. The "Cleaning Rod/Brush Adapter" sounds like it just turns the tool into a cleaning rod handle. You will still need a cleaning rod(s). The "Replaceable Firearms Disassembly Punch" sounds like a small metal rod used to push out the Take Down Pin and the Receiver Pivot Pin. We used to use either the tip of a round or a section of a cleaning rod. And I don't know what to think about the "Replaceable Bronze Carbon Scraper". Bore burshes are brass and I would think a lot more effect removing carbon out of the bore. That said, the tool is "cool" looking and I will probably get one. I just think the whole connection to weapons maintenance is a bit overblown.

-
I must find a way to be the first one on MTO to get this tool!!!!!!!!
-
Wow, I'm late to the party. Hammer!!! The clip looks nicely robust and having the hammer justifies the extra length allowing for the carabiner.
@1jump2many said:
Is this tool designed specifically for the M4/AR? To be honest the so called weapons tools don't seem to be any kind of engineering break though. The "Cleaning Rod/Brush Adapter" sounds like it just turns the tool into a cleaning rod handle. You will still need a cleaning rod(s). The "Replaceable Firearms Disassembly Punch" sounds like a small metal rod used to push out the Take Down Pin and the Receiver Pivot Pin. We used to use either the tip of a round or a section of a cleaning rod. And I don't know what to think about the "Replaceable Bronze Carbon Scraper". Bore burshes are brass and I would think a lot more effect removing carbon out of the bore. That said, the tool is "cool" looking and I will probably get one. I just think the whole connection to weapons maintenance is a bit overblown.
I agree. That said, I think the Mut is screaming for mods. I would like to see the bronze scraper replaced with a steel awl and the disassembly punch replaced with a precision screwdriver with a reversible bit.
Hammer!!!!
-
-
@1jump2many said:
Is this tool designed specifically for the M4/AR? To be honest the so called weapons tools don't seem to be any kind of engineering break though. The "Cleaning Rod/Brush Adapter" sounds like it just turns the tool into a cleaning rod handle. You will still need a cleaning rod(s). The "Replaceable Firearms Disassembly Punch" sounds like a small metal rod used to push out the Take Down Pin and the Receiver Pivot Pin. We used to use either the tip of a round or a section of a cleaning rod. And I don't know what to think about the "Replaceable Bronze Carbon Scraper". Bore burshes are brass and I would think a lot more effect removing carbon out of the bore. That said, the tool is "cool" looking and I will probably get one. I just think the whole connection to weapons maintenance is a bit overblown.
Good observations 1J2M.
Some additional information to consider:Replaceable Firearms Disassembly Punch is indeed nothing more than a small metal rod intended for pushing out pins. In the event that those pins should get jammed tight however, the Disassembly Punch can be quickly unscrewed from the MUT and then tapped on with the hammer portion of the tool in order to remove the stubborn pin. (Note that the female threads on the Punch are recessed somewhat from the end, so light blows from the hammer should not damage it)
Replaceable Bronze Carbon Scraper was intended to scrape carbon build-up from the gas piston and rod assembly, not the bore. (I'm not fluent with the care and maintenence of these rifles, but the carbon build-up on the sample rifle we were shown was more than what a bronze brush alone could remove) :-\ The scraper itself was made of a bronze alloy specifically so that it would not be able to damage the piston mechanism.
By the way, the bronze scraper, the disassembly punch, the long flat driver bits, and the tool steel cutting inserts will all be available as seperate replacement items.
-
Some more hammer pics by the way:


Raukodur's suggestion of beveling the tip of the hammer and adding a V-groove - thereby making it into what would seem to be a damn useful prybar tool - didn't get much traction when we mentioned it to the Leatherman folks today. :-\ It's too good of an idea in my opinion to just let go though.
Some additional
-ing will definitely be in order. :D -
Any more info on sheath colors?
-
@J-sews said:
Replaceable Bronze Carbon Scraper was intended to scrape carbon build-up from the gas piston and rod assembly, not the bore. (I'm not fluent with the care and maintenence of these rifles, but the carbon build-up on the sample rifle we were shown was more than what a bronze brush alone could remove) :-\ The scraper itself was made of a bronze alloy specifically so that it would not be able to damage the piston mechanism.You would be surprised how well a brass bore brush, Break Free and a Soldier's persistence works at removing carbon buildup. :D On an M4/AR weapon the toughest places to remove carbon is where the bore meets the barrel, due to it's star shape. So once again the brass bore brush, Break Free and elbow grease works the best. The gas tube on an M4/AR type weapon usually isn't a main focus during a field cleaning. Just a quick wipe down. On an AK type of weapon it is though.
I like the tool and will eventually end up getting one. I was just pointing out that the weapon itself isn't a portable cleaning device. It will still require that other pieces of cleaning kit be available like cleaning rods, Break Free, brushes, etc.
I would also like to see the blade be 154CM, instead of the 440HC.
-
I like it , deffinatley on my list , and it will make a great gift for a gun knutt buddy ! Good spot !
Chris
-
The first Tacticool multi ! I like the replacable bronze scraper , good for many diverse applications . I like the blade shape , the hammer pommel is worth the price of admission . Looks like it would be a LuLu of an impact weapon .
FWIW , I think Leatherman just got me back as a customer ( unless the F/F is truly bad ).
Chris
-
@1jump2many said:
You would be surprised how well a brass bore brush, Break Free and a Soldier's persistence works at removing carbon buildup. :D On an M4/AR weapon the toughest places to remove carbon is where the bore meets the barrel, due to it's star shape. So once again the brass bore brush, Break Free and elbow grease works the best. The gas tube on an M4/AR type weapon usually isn't a main focus during a field cleaning. Just a quick wipe down. On an AK type of weapon it is though.I like the tool and will eventually end up getting one. I was just pointing out that the weapon itself isn't a portable cleaning device. It will still require that other pieces of cleaning kit be available like cleaning rods, Break Free, brushes, etc.
I was kind of thinking that the scraper might be the right size to go between the "teeth" of the locking lug at the barrel, making getting that star-shaped section clean a little easier. Scrape out the thick gunk, then go for the brass brush to finish up.
It would be nice if the MOLLE pouch this rides in could also carry the rest of the cleaning kit. If I remember my old surplus cleaning rod correctly, each section wouldn't be much longer than the MUT, so it could ride around behind it in the pouch.
-
I have wanted a full size Skeletool ever since I got one. That BAD BOY looks great.
I wonder if LM will do a CUT :P(Civilian Utility Tool) I would HAVE to get that one if it shared most of the MUT's cool features
:DDon't let a little ol' name scare you away. Just because it says Military doesn't mean you can't own it. If you want it, buy it! :D
Not scared
:D I am not likely too ever own a gun so I do not see the point in owning a gun maintenance MT.
That said there is an awful lot too like about the MUT & if the price was right I would find it impossible to say no :D -
@Styerman said:
The first Tacticool multi ! I like the replacable bronze scraper , good for many diverse applications . I like the blade shape , the hammer pommel is worth the price of admission . Looks like it would be a LuLu of an impact weapon .FWIW , I think Leatherman just got me back as a customer ( unless the F/F is truly bad ).
Chris
F/F is truly good on the samples we handled.

-
@SlackOne said:
I was kind of thinking that the scraper might be the right size to go between the "teeth" of the locking lug at the barrel, making getting that star-shaped section clean a little easier. Scrape out the thick gunk, then go for the brass brush to finish up.It would be nice if the MOLLE pouch this rides in could also carry the rest of the cleaning kit. If I remember my old surplus cleaning rod correctly, each section wouldn't be much longer than the MUT, so it could ride around behind it in the pouch.
Yeah, the scraper could help get in there but the grove behind the star shaped section is the pain. I bought some star shaped patches and soak them in Break Free. Then set the soaked star shaped patch in there, spin it around a couple times and then leave it for a while. It helps to get the Break Free in that area to loosen up the carbon. It's still a pain though.
I really like your idea about MOLLE sheath having pockets to carry the rest of the cleaning kit. It might be a bit large though.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
