Leatherman MUT?
-
I am seriously looking at this tool, I know it's MADE for maintaining the riffle but it could be used for EDC quite easily, sure you would not use all the tools but the saw, knife, driver, hammer/pry, etc can all be used. I know the $150 tag seems steep but that is MSRP probably and we can probably later find it on the net for like $100 I bet. This tool has some serious promise and once again shows us that Leatherman strives to keep packing more tools in such a small package.
-
@MultiMat said:
I have wanted a full size Skeletool ever since I got one. That BAD BOY looks great.
I wonder if LM will do a CUT :P(Civilian Utility Tool) I would HAVE to get that one if it shared most of the MUT's cool features
:DDon't let a little ol' name scare you away. Just because it says Military doesn't mean you can't own it. If you want it, buy it! :D
-
I WANT ONE! I really like the design of the skeletool, just wished it had a saw. This looks like a great combo!
-

Start saving now then ::) :D
-
@Anthony said:
...I wonder how many Leatherman nuts here will also purchase a gun simply to test some of the impliments on this tool... :DI'm considering it, and ironically my reason before now for not wanting a gun was because I didn't trust myself to clean it enough to keep it safe. However, now that I have a LM that helps with cleaning, I can get a gun to justify getting the multitool which will justify getting the gun. Circular logic is the best kind of logic.
-
@turbov21 said:
I'm considering it, and ironically my reason before now for not wanting a gun was because I didn't trust myself to clean it enough to keep it safe. However, now that I have a LM that helps with cleaning, I can get a gun to justify getting the multitool which will justify getting the gun. Circular logic is the best kind of logic.Win - Win Situation.. :D :D
-
Holy cow!
Awesome report as always guys!
I'm definitely in for this one. A OH blade and a saw plus a pocket clip!
:ahhh
-
Found some more pics.



-
questiong, whats with the hole in plier head?

-
Hole? You mean where the wire cutter inserts go?
-
I think he means the 1 in the side
What is that there for ??? :D -
Not a clue ???
I am telling you guys, I need to stop looking at this tool. I really don't need one but it's drawing me to it every time I see it, it's just so damn sexy!
-
Is this tool designed specifically for the M4/AR? To be honest the so called weapons tools don't seem to be any kind of engineering break though. The "Cleaning Rod/Brush Adapter" sounds like it just turns the tool into a cleaning rod handle. You will still need a cleaning rod(s). The "Replaceable Firearms Disassembly Punch" sounds like a small metal rod used to push out the Take Down Pin and the Receiver Pivot Pin. We used to use either the tip of a round or a section of a cleaning rod. And I don't know what to think about the "Replaceable Bronze Carbon Scraper". Bore burshes are brass and I would think a lot more effect removing carbon out of the bore. That said, the tool is "cool" looking and I will probably get one. I just think the whole connection to weapons maintenance is a bit overblown.

-
I must find a way to be the first one on MTO to get this tool!!!!!!!!
-
Wow, I'm late to the party. Hammer!!! The clip looks nicely robust and having the hammer justifies the extra length allowing for the carabiner.
@1jump2many said:
Is this tool designed specifically for the M4/AR? To be honest the so called weapons tools don't seem to be any kind of engineering break though. The "Cleaning Rod/Brush Adapter" sounds like it just turns the tool into a cleaning rod handle. You will still need a cleaning rod(s). The "Replaceable Firearms Disassembly Punch" sounds like a small metal rod used to push out the Take Down Pin and the Receiver Pivot Pin. We used to use either the tip of a round or a section of a cleaning rod. And I don't know what to think about the "Replaceable Bronze Carbon Scraper". Bore burshes are brass and I would think a lot more effect removing carbon out of the bore. That said, the tool is "cool" looking and I will probably get one. I just think the whole connection to weapons maintenance is a bit overblown.
I agree. That said, I think the Mut is screaming for mods. I would like to see the bronze scraper replaced with a steel awl and the disassembly punch replaced with a precision screwdriver with a reversible bit.
Hammer!!!!
-
-
@1jump2many said:
Is this tool designed specifically for the M4/AR? To be honest the so called weapons tools don't seem to be any kind of engineering break though. The "Cleaning Rod/Brush Adapter" sounds like it just turns the tool into a cleaning rod handle. You will still need a cleaning rod(s). The "Replaceable Firearms Disassembly Punch" sounds like a small metal rod used to push out the Take Down Pin and the Receiver Pivot Pin. We used to use either the tip of a round or a section of a cleaning rod. And I don't know what to think about the "Replaceable Bronze Carbon Scraper". Bore burshes are brass and I would think a lot more effect removing carbon out of the bore. That said, the tool is "cool" looking and I will probably get one. I just think the whole connection to weapons maintenance is a bit overblown.
Good observations 1J2M.
Some additional information to consider:Replaceable Firearms Disassembly Punch is indeed nothing more than a small metal rod intended for pushing out pins. In the event that those pins should get jammed tight however, the Disassembly Punch can be quickly unscrewed from the MUT and then tapped on with the hammer portion of the tool in order to remove the stubborn pin. (Note that the female threads on the Punch are recessed somewhat from the end, so light blows from the hammer should not damage it)
Replaceable Bronze Carbon Scraper was intended to scrape carbon build-up from the gas piston and rod assembly, not the bore. (I'm not fluent with the care and maintenence of these rifles, but the carbon build-up on the sample rifle we were shown was more than what a bronze brush alone could remove) :-\ The scraper itself was made of a bronze alloy specifically so that it would not be able to damage the piston mechanism.
By the way, the bronze scraper, the disassembly punch, the long flat driver bits, and the tool steel cutting inserts will all be available as seperate replacement items.
-
Some more hammer pics by the way:


Raukodur's suggestion of beveling the tip of the hammer and adding a V-groove - thereby making it into what would seem to be a damn useful prybar tool - didn't get much traction when we mentioned it to the Leatherman folks today. :-\ It's too good of an idea in my opinion to just let go though.
Some additional
-ing will definitely be in order. :D -
Any more info on sheath colors?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
