And so it begins.... (My adventures into Alox!)
-
@Leadfoot said:
Nice job Syph007.So the detached piece from the scissor spring is not attached in place, but is held in place by the two matching flats and the pivot?
Leadfoot
Yup it's under tension so it doesn't move at all. I make my scissor rests for 93mm similarly.
I got some 12 Gauge (0.105") stainless 304 that I will use now since it isn't hardened like a SAK spring it will be easier to work. The rest also doesn't need to be spring tempered, so next time I will just chop off the springy part I need and make the rest out of non tempered stainless.
-
Nice way of adding a scissors and looks good too.
Will add this to my growing list of good ideas.
Leadfoot
-
Well thanks to you I was almost late for work this morning. I couldn't stop reading this thread!
Very interesting.
-
@BlueDot said:
Well thanks to you I was almost late for work this morning. I couldn't stop reading this thread!Very interesting.
lol.. apologies to your work, but I've done the same reading threads in this section, so I know how it goes!
Nothing too exciting to look at yet, but this is what I spent all my free time doing this weekend. Stripped naked SAK scales.. bare of all anodizing!

I had to track down 100% pure lye and strip these in the backyard. Nasty nasty stuff, it was boiling away like a witches cauldron. I got the ratio mixed so that each scale only needs about a 30 second dip and when I cant see any more red on the shield, it's done.
My first run I let the electroplater guy strip for me (lol that sounds odd) and some of the red remained behind, so I wanted to do the prep this time to be sure of what I get. If the cost isn't too high this will get done in 3 colors HAIII black/red/orange... if it costs too much than just 2 colors either black and red, or black and orange. I'm dropping them off in the morning and I hope he can be done soon since I'm super anxious to put some colored ones together!
-
orange me thinks orange!
but if i can be really bold go for something like suzuki RM yellow. Stand out from the crowd :D
-
I'm waiting with bated breath.

-
Still waiting to hear about my anodizing.... I really hope he's done by the weekend!
Here is a test mock up of the part I made in my templaing thread. This is a 0.105" thick rest made from 304 stainless, with super beefy keyring attachment.
This is a prototype test fit only, it still needs some adjustment, but it's darn close.


I think it looks pretty decent.



-
very nice!! you are getting serious in this, congrats!
btw i really like that golden pin, it looks very cool
. -
@Sidhartha said:
very nice!! you are getting serious in this, congrats!btw i really like that golden pin, it looks very cool
.lol it was all i had on hand to test fit... :D
-
That looks great. So much sturdier than the spacer keyring and in the Urban Pioneer it puts the keyring right in the center layer. Now you just have to rout out a hundred or so and send them to me so I can tumble polish them.

-
very nice!! you are getting serious in this, congrats!
btw i really like that golden pin, it looks very cool
.lol it was all i had on hand to test fit... :D
i have done the same a few times :D
-
@bushidomosquito said:
That looks great. So much sturdier than the spacer keyring and in the Urban Pioneer it puts the keyring right in the center layer. Now you just have to rout out a hundred or so and send them to me so I can tumble polish them.
Or waterjet!! :D I don't have a band saw, so I have been hack sawing them to rough out, then filing to get close, then routing. Probably about 30 minutes each, so 100 wont happen too quickly...
-
Happy days are here, we have colors!!! They called just as I was leaving the office so I grabbed them on the way home. They were out of orange dye so I ended up getting hard anodized black, red and blue!




-
look excellent Syph. 8)
-
ooo like the red ones!
-
@Sidhartha said:
ooo like the red ones!I like the Blue!!! JR
-
ooo like the red ones!
I like the Blue!!! JR
Ya, I'm totally happy with the blue. I was going to just get the rest all red when he said he was out of orange dye, but he saw me hesitating and they offered a discount on the blue run since I was originally wanting orange, but Im completely happy with the blue. I'll have to start saving scales up again and get orange another time.
-
I thought that they only can do HAIII in black or dark grey?
-
@jan. said:
I thought that they only can do HAIII in black or dark grey?Me too, but he tells me that his way works for color.
Maybe they arent mill spec HAIII, I dont know, but it's around 55 RC and regular anodizing is about 35 so its for sure hardened. The non hard anodize he does is shinier, while this is duller but still quite nice I think. I'll take a pic comparing this red to the stock vic red, its quite a bit darker.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
