Leatherman REBAR Multi-Tool
-
Nice, that didn't take long at all. Are you going to put it back together or mod it?
Oh, do you have the LM tools to take it apart, or did you improvise?
-
@gustophersmob said:
Nice, that didn't take long at all. Are you going to put it back together or mod it?Oh, do you have the LM tools to take it apart, or did you improvise?
Well to be perfectly honest, I took it apart almost immediately because the saw blade was "dragging" when I opened or closed it. :-\ Upon close inspection, the handle metal right near the pivot....where the edges of it fold over to make it more comfortable to squeeze...was "bumped up" a little bit, and the saw blade was rubbing against it. Not horrible, but annoying to someone who is anal about such things (like me) :D It probably would have worked itself out with a little use, but I got impatient and just took it apart and filed the offending metal down a bit. Problem solved.

The spot I filed down is circled below. Homemade disassembly tools are in the background.

-
j-Sews, though it has no dates I would estimate, based on my extensive research, that your Rebar it was made in early 2012. :D
i hope that helps you.

-
Interesting disassembly tools, how did you make them? Good job by the way. I love taking things apart too.
-
Aw, poor little thing didn't stand a chance in your hands Bob! >:D
So, just to pick your brains a touch here... if you were making a UK legal tool with no knives, what would make a good replacement for those tools?
I am assuming scissors as these are a must, but can something else useful fit and what would you choose?
-
@nuphoria said:
Aw, poor little thing didn't stand a chance in your hands Bob! >:DSo, just to pick your brains a touch here... if you were making a UK legal tool with no knives, what would make a good replacement for those tools?
I am assuming scissors as these are a must, but can something else useful fit and what would you choose?
I'm tempted to say replace knife and smaller flat driver with bit adapter, and serrated blade and can opener with scissors ... if that would work
Personally I'd keep the saw I think (though not convinced by it's size) - but possibly replace with eyeglasses bit adapter if there's concerns of "street carry" legality
That's taking it a long way away from it's original load out though. It would kind of take it to a glorified version of how I've got my Kick set up ... and with locking drivers ... but without a pocket clip :-\I was half tempted as a knifeless version despite the inboard tools, but I think I've just talked myself out of it again :-\
Are the tangs identical to current tools (Wave etc), meaning it's a simple Lego-esque operation?
-
-
Can anyone determine whether it'd be possible to get a Fuse, Blast, or Wave scissors in there if you took out the can opener and lanyard ring or something?
I'm really thinking the Rebar would be a perfect replacement for my Fuse if I can get scissors in it somehow. -
@50ft-trad said:
Are the tangs identical to current tools (Wave etc), meaning it's a simple Lego-esque operation?Using a set of dial calipers to measure Al, it appears that the pivot diameters, the lock bar notches, and the centerlines are the same as on other full-size tools like Blast, Wave, etc. So I'm about 95% certain on the lego-esque-ness question. (didn't actually try a switcheroo though)
@MedusaOblongata said:
Can anyone determine whether it'd be possible to get a Fuse, Blast, or Wave scissors in there if you took out the can opener and lanyard ring or something?
I'm really thinking the Rebar would be a perfect replacement for my Fuse if I can get scissors in it somehow.You would have to take some other tool out in order to fit scissors in MedOb. A quick measurement on a set of Charge scissors shows them to be about 2.5mm thick, but the lanyard ring is only 1.5mm thick. :-\

-
@50ft-trad said:
Are the tangs identical to current tools (Wave etc), meaning it's a simple Lego-esque operation?
Using a set of dial calipers to measure Al, it appears that the pivot diameters, the lock bar notches, and the centerlines are the same as on other full-size tools like Blast, Wave, etc. So I'm about 95% certain on the lego-esque-ness question. (didn't actually try a switcheroo though)
Cheers Bob

-
@J-sews said:
You would have to take some other tool out in order to fit scissors in MedOb. A quick measurement on a set of Charge scissors shows them to be about 2.5mm thick, but the lanyard ring is only 1.5mm thick. :-\Thank you for the response. What if you took out the can opener, or can opener and lanyard ring?
Do you know if the Fuse/Blast scissors would fit the same as Charge scissors? -
Nice one Bob!!
As for the scissors, even if you do remove a tool I'm not entirely certain the thumb tab would sit low enough in the handle to clear the plier head in the closed position.
I've been tossing this around myself.
-
Oy Bob, I refer you to my earlier question about removing the blades?!
Get your calipers back out please :D
-
annnnd again...
Bob, can you compare the plier pivots to a wave/charge to see if we can swap the heads?!?
-
By the way, to anyone considering buying the Rebar with a Leather sheath: The leather sheath that comes with it is CRAP. C-R-A-P. Mine stretched out the first day when it caught a chair as I got up and it only got worse from there. I have no faith that it is even as sturdy as the Blast/fuse sheaths, it feels much cheaper. Even if you hate nylon I would go with nylon. At least you know your tool won't fall off your belt.
-
Try the new Wave leather sheath. The one with only one side pocket. I bought a couple of them a few months ago for Waves, and didn't like them at all. They fit the Wave far too tightly IMO, and they were just lying in a box. I thought the new Rebar leather sheath was a just barely, and those flat pancake sheaths that come with them are just cheap junk. Enter the Wave sheath. It fits the Rebar perfectly, and gives you the option of carrying a AAA flashlight, a minii Sharpie, etc. I'll try to post some pics today, but it seems a very good fit and solution to me.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D
