Leatherman REBAR Multi-Tool
-
-
Can anyone determine whether it'd be possible to get a Fuse, Blast, or Wave scissors in there if you took out the can opener and lanyard ring or something?
I'm really thinking the Rebar would be a perfect replacement for my Fuse if I can get scissors in it somehow. -
@50ft-trad said:
Are the tangs identical to current tools (Wave etc), meaning it's a simple Lego-esque operation?Using a set of dial calipers to measure Al, it appears that the pivot diameters, the lock bar notches, and the centerlines are the same as on other full-size tools like Blast, Wave, etc. So I'm about 95% certain on the lego-esque-ness question. (didn't actually try a switcheroo though)
@MedusaOblongata said:
Can anyone determine whether it'd be possible to get a Fuse, Blast, or Wave scissors in there if you took out the can opener and lanyard ring or something?
I'm really thinking the Rebar would be a perfect replacement for my Fuse if I can get scissors in it somehow.You would have to take some other tool out in order to fit scissors in MedOb. A quick measurement on a set of Charge scissors shows them to be about 2.5mm thick, but the lanyard ring is only 1.5mm thick. :-\

-
@50ft-trad said:
Are the tangs identical to current tools (Wave etc), meaning it's a simple Lego-esque operation?
Using a set of dial calipers to measure Al, it appears that the pivot diameters, the lock bar notches, and the centerlines are the same as on other full-size tools like Blast, Wave, etc. So I'm about 95% certain on the lego-esque-ness question. (didn't actually try a switcheroo though)
Cheers Bob

-
@J-sews said:
You would have to take some other tool out in order to fit scissors in MedOb. A quick measurement on a set of Charge scissors shows them to be about 2.5mm thick, but the lanyard ring is only 1.5mm thick. :-\Thank you for the response. What if you took out the can opener, or can opener and lanyard ring?
Do you know if the Fuse/Blast scissors would fit the same as Charge scissors? -
Nice one Bob!!
As for the scissors, even if you do remove a tool I'm not entirely certain the thumb tab would sit low enough in the handle to clear the plier head in the closed position.
I've been tossing this around myself.
-
Oy Bob, I refer you to my earlier question about removing the blades?!
Get your calipers back out please :D
-
annnnd again...
Bob, can you compare the plier pivots to a wave/charge to see if we can swap the heads?!?
-
By the way, to anyone considering buying the Rebar with a Leather sheath: The leather sheath that comes with it is CRAP. C-R-A-P. Mine stretched out the first day when it caught a chair as I got up and it only got worse from there. I have no faith that it is even as sturdy as the Blast/fuse sheaths, it feels much cheaper. Even if you hate nylon I would go with nylon. At least you know your tool won't fall off your belt.
-
Try the new Wave leather sheath. The one with only one side pocket. I bought a couple of them a few months ago for Waves, and didn't like them at all. They fit the Wave far too tightly IMO, and they were just lying in a box. I thought the new Rebar leather sheath was a just barely, and those flat pancake sheaths that come with them are just cheap junk. Enter the Wave sheath. It fits the Rebar perfectly, and gives you the option of carrying a AAA flashlight, a minii Sharpie, etc. I'll try to post some pics today, but it seems a very good fit and solution to me.
-
Totally buying one, thanks!
-
The sheath is even worse than the Blast's one? :ahhh How the mighty have fallen. Most of us know the fantastic quality of the LM sheaths for the old school tools; PST, Pulse, Supertool etc. those sheaths are a joy to own and I'm truly saddened to hear the the standards are getting even worse. :'(
-
Rather than hijack this thread further, I started a new thread with some of the answers to your Rebar modding questions:

Link = /topic/37322
-
I just got mine in the mail. I love this tool. I held it up to all of the other ones. It is almost identical in size to the Pulse.
-
@genevabuck said:
I just got mine in the mail. I love this tool. I held it up to all of the other ones. It is almost identical in size to the Pulse.which is great news as the Pulse is the perfect sized Leatherman IMO. 8)
-
@Gareth said:
The sheath is even worse than the Blast's one? :ahhh How the mighty have fallen. Most of us know the fantastic quality of the LM sheaths for the old school tools; PST, Pulse, Supertool etc. those sheaths are a joy to own and I'm truly saddened to hear the the standards are getting even worse. :'(Sad but true. I was shocked at the low quality of the sheath. I have always defended the Blast sheath, because I have used them for years and, yes, they wear out, but they aren't as bad as people make them out to be. The Rebar sheath might as well be made of lunchmeat, that's what it feels like.
-
The sheath is even worse than the Blast's one? :ahhh How the mighty have fallen. Most of us know the fantastic quality of the LM sheaths for the old school tools; PST, Pulse, Supertool etc. those sheaths are a joy to own and I'm truly saddened to hear the the standards are getting even worse. :'(
Sad but true. I was shocked at the low quality of the sheath. I have always defended the Blast sheath, because I have used them for years and, yes, they wear out, but they aren't as bad as people make them out to be. The Rebar sheath might as well be made of lunchmeat, that's what it feels like.
On the bright side, the Skinth series might see an even greater market boom.
-
The sheath is even worse than the Blast's one? :ahhh How the mighty have fallen. Most of us know the fantastic quality of the LM sheaths for the old school tools; PST, Pulse, Supertool etc. those sheaths are a joy to own and I'm truly saddened to hear the the standards are getting even worse. :'(
Sad but true. I was shocked at the low quality of the sheath. I have always defended the Blast sheath, because I have used them for years and, yes, they wear out, but they aren't as bad as people make them out to be. The Rebar sheath might as well be made of lunchmeat, that's what it feels like.
On the bright side, the Skinth series might see an even greater market boom.
The skinths are perfect for Leatherman tools. I wish that LM would come to it's senses and contract Eric to make their sheaths.
-
The sheath is even worse than the Blast's one? :ahhh How the mighty have fallen. Most of us know the fantastic quality of the LM sheaths for the old school tools; PST, Pulse, Supertool etc. those sheaths are a joy to own and I'm truly saddened to hear the the standards are getting even worse. :'(
Sad but true. I was shocked at the low quality of the sheath. I have always defended the Blast sheath, because I have used them for years and, yes, they wear out, but they aren't as bad as people make them out to be. The Rebar sheath might as well be made of lunchmeat, that's what it feels like.
On the bright side, the Skinth series might see an even greater market boom.
The skinths are perfect for Leatherman tools. I wish that LM would come to it's senses and contract Eric to make their sheaths.
I would be set for life. :)
I did get a call from Bob at Pockits....
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

