The Splash - LM Squirt Mod
-
@Metropolicity said:
Yah a total of 4 layers. 2 blade layers and 2 tool layers. I'll see about mixing them up and organizing them so they make sense.My radio shack e4's came in today with the 3d Phillips, more blades to try to carve a SE on and the tweezer/eyeglass driver layer.
I am going to see if I can manage to only carve up one since they are really good condition.
Cool! if IRC the 1/2" long pivots worked out really well with 3 layers, the pivots extended half way into the scale holes almost perfectly. I'm anxious to see how 4 layers works out. The screws that come with the pivots are pretty long so it should at least go together, just hopefully the outside layers wont feel too flimsy with the pivot not reaching all the way to the scale. I guess as long as the pivot extends more than half way into the tool bit it should be all good. It'd be cool to find some 3/4" or 1" long pivots and just cut them to length but 1/2" is the longest i could find.
-
Yah a total of 4 layers. 2 blade layers and 2 tool layers. I'll see about mixing them up and organizing them so they make sense.
My radio shack e4's came in today with the 3d Phillips, more blades to try to carve a SE on and the tweezer/eyeglass driver layer.
I am going to see if I can manage to only carve up one since they are really good condition.
Cool! if IRC the 1/2" long pivots worked out really well with 3 layers, the pivots extended half way into the scale holes almost perfectly. I'm anxious to see how 4 layers works out. The screws that come with the pivots are pretty long so it should at least go together, just hopefully the outside layers wont feel too flimsy with the pivot not reaching all the way to the scale. I guess as long as the pivot extends more than half way into the tool bit it should be all good. It'd be cool to find some 3/4" or 1" long pivots and just cut them to length but 1/2" is the longest i could find.
If I need to splice, I'll splice. But if it's only 2mm or so, I'll trim a spacer.
I plant to replace the scales with precision steel rulers so I'll have enough space :)
-
I'm looking forward too this one 
-
@Metropolicity said:
If I need to splice, I'll splice. But if it's only 2mm or so, I'll trim a spacer.I plant to replace the scales with precision steel rulers so I'll have enough space :)
Oh wow! i didn't catch that, i thought you were going to put the ruler in a tool slot, but you're making scales out of the ruler! too cool

-
If I need to splice, I'll splice. But if it's only 2mm or so, I'll trim a spacer.
I plant to replace the scales with precision steel rulers so I'll have enough space :)
Oh wow! i didn't catch that, i thought you were going to put the ruler in a tool slot, but you're making scales out of the ruler! too cool

Yah! It'll be nice to have a precision ruler, even 2" of it would be useful. It's going to be a testing bed because I plan to use the same technique for my Juice KF4S mod :)
-
Success! I won both the S4's, which have the Ruler/Nail File/Gunk Hook.
All the parts are acquired now...
-
Long after they have made a multi-tool for each person on earth, the collectors and modders will continue to fuel demand...
-
Did some planning today, taking a mental break from Skinth.
From what I gathered this is the load out.
A Layer 1 (outside):
-PE Blade
B Layer 1 (outside):
-3D Phillips/Flat DriverA Layer 2 (inside):
-Nail File
B Layer 2 (inside):
-2D phillips/Awl
C Layer 1 (outside):
-SE Blade
D Layer 1 (outside):
-ScissorsC Layer 2 (inside)
-?????!!!!
D Layer 2 (inside)
-Eyeglass Driver/Tweezers--
So after planning. I notice...wait a minute! Even with ALL of the tools in one Squirt from 3 squirts...there's still a blank outside opening slot!!! What to do?!
A package opener? The standard file? a wire stripper? a warney blade? gut hook? Another pair of scissors? Staple pry bar?
AHHHHH MY BRAIN IS NOT WORKING!
-
It's all looking good mate, but a few thoughts if I may ...
-
The blade length seems too short to bother with serrations for me - are you sure it'll be worth the effort (if you drop that you're on an even tool count)
-
If keeping the SE blade, I think a package opener would round things off nicely
-
How are you overcoming the nail nick issue? The outer tools obscuring the inner tools - there isn't enough clearance on the backsprings for the pliers to reverse them either
-
-
@50ft-trad said:
It's all looking good mate, but a few thoughts if I may ...- The blade length seems too short to bother with serrations for me - are you sure it'll be worth the effort (if you drop that you're on an even tool count)
- If keeping the SE blade, I think a package opener would round things off nicely
- How are you overcoming the nail nick issue? The outer tools obscuring the inner tools - there isn't enough clearance on the backsprings for the pliers to reverse them either
I am going to give it a go anyways, the SE I made already is too aggressive. I am going to see about making a more gentle curved one. I've never been one to shy away from a challenge.
I was thinking of taking a Swann-Morton scalpel blade holder and adapting it to the last spot. I do a lot of paper craft and detail work and having one on the go would be pretty neat. Also, the replaceable blades would be nice too. Failing that, I think a super pointy, Exacto shaped blade would be good a substitute if it wouldn't fit.
All it would take would be a new profile on one of the blades and then a chisel grind with my Lansky sharpner.
As Evilolive has demonstrated when he assembled his, there is room for finger nails to get in there, it'll be SAK like, but still doable.
Here's the pics from his thread:


You'll notice that there is lots of space for deployment. The sandwiched chassis and spaces will work...I hope :)
-
how much bigger is it? -
Ah, I see - looks like the layers are well spaced. I'd got a more compact vision in my minds eye :)
-
More parts came in today.
A really worn E4 and a couple of P4's. The grey p4 will be the one to be disassembled.
I opened the package with a very generous early birthday gift from Cornholio, a gerber g10 EAB ;)

I also ordered a couple of Swann-Morton scalpel holders (steel ones) and I am going to try to shape and fit it into the extra blade slot I discovered.
-
I like the idea of sharp replaceable blades


-
Looking forward on seeing how this mod progresses.

BTW. How do you like the form factor of the EAB lite compared to the original one?
-
I like how you alway come up with new ideas.
Judging from the size i imagine the EAB to be, the Squirt seems to be tiny.
Would you mind taking one of the next pics with a Sak as a reference? Or maybe a freehand, just for giggles ;-)If one of the Squirts (maybe one with the wire stripper head?) ends up unharmed, i might feel the need to pester you to trade me one...
Until then:

-
@lowtech said:
I like how you alway come up with new ideas.
Judging from the size i imagine the EAB to be, the Squirt seems to be tiny.
Would you mind taking one of the next pics with a Sak as a reference? Or maybe a freehand, just for giggles ;-)If one of the Squirts (maybe one with the wire stripper head?) ends up unharmed, i might feel the need to pester you to trade me one...
Until then:

I know I won't be screwing with a couple of more mint e4's.
I'll take rally when this mod gets done. The pivots, blade holders and the s4's need to come in before I get going on this :)
-
Screw this, I did it, I am going to try to make a big awl for one of the "big tools", in place of the mini awl will be this (hopefully). The steel from a Surge removable saw blade should be fine steel for the "big" awl.
Ground down the E4 (which is narrower at the tip) into a stubby package opener. Not sure if I am am 100% on board with this, but it seems to work. I call it the push and pull package opener.




Why push and pull? Push in the sharp tip to pierce the plastic, then pull to slide the cutting edge. Leatherman fans will know that is a BO Rebar being opened up.



So this calls a for a new tool load out.
Big tools
- PE blade
- Scalpel
- Scissors
- Big awl
- Nail file
Small tools
6. 3d Philips
7. 2d Phillips
8. Eyeglass driver
9. Flat bit/bottle opener
10. Push&Pull package opener
11. Tweezers
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login