Wanted: Detailed Diagram of the 91mm Plus Scales
-
@PTRSAK said:
This is what I bought, http://www.ebay.com/itm/130835306097?Enough there to make a dozen or more crosses. The red dye just sands off, only on the surface.
Awesome. Just ordered some. My cc is hating me about now. :ahhh
Free shipping though.• Exotic Australian Wood
• Pen, pin, & spare toothpick to quality for free shipping from Swiss Knife Shop. Was cheaper than Amazon!
• 1.5 H x 3mm W neodymium magnets (50)
• Ivory Nut ShellsStill going to need to get some sort of glue or epoxy (any recommendations?), coping saw, sandpaper, ect.
When I kick the bucket someone's going to have fun with that Climber
But, you know, when I was searching for a 1961 six pence Australian coin that went MIA ran across a rather useful tool. A valve core tool. Then made me wonder if that hidden slot was big enough to fit in a flat valve core tool. Probably not.
Not seen a valve core tool on any multitool or even a hex/flat-hex bit valve core driver. Had thought E510 had fashioned a bit once...

Just about every vehicle still uses valve cores. They do get loose at times, and bicycles still use them - hisses at Schrader valves!
-
@PTRSAK said:
Talking of logos for wooden scales...
This is a bit of an experiment testing a couple of things. Firstly to see how an "Ivory" cross inlayed into the wood looks and how easy the Tagua nut "vegetable ivory" is to work with and how well it wears.
I will finish these to fit a Recruit and give it a bit of pocket time with flashlight, keys and change for company.I think it will look pretty schmick myself.




-
You drilled out the pins in the knife then pinged them over the wooden scales?

Don't think I'm that brave. Will use a glue or epoxy. :D
-
@papercut said:
Edrawing viewer for cad viewer or auto desk has one free one too.For the Free/Trial versions: AutoDesk did not wish to cooperate when printing to a specified size, and the other just wouldn't measure or print.
The pen scale looks like the regular scale, with the added pen channel. Thanks for the effort fellas, <u>is</u> highly appreciated.
The graphics files are immensely valuable. That really helps grasp the visual perspective in 3D-like captures. Perhaps other folks viewing this later on in the years will find them useful too.
Edit: The PDF file helps a lot as it easily allows for an actual sized print. 
-
Tagua Nut pieces arrived today, along with a package from Germany - Lowtech delivered goodies. :D
Took a bit of work to get the red off. That's one tough nut. They are thin enough to use a guitar picks, and each one has been drilled near the edge.

Not sure what sort of red material that coating is. Wonder if it can be soaked in something to remove that red substance? Maybe vinegar, to remove the red dye/coating.
-
Mate that looks GREAT


Peter any problems with the nut material getting through Oz customs being organic & all that
Does the dye seal it & make it ok to be brought into Oz

-
@Xelkos said:
Tagua Nut pieces arrived today, along with a package from Germany - Lowtech delivered goodies. :DTook a bit of work to get the red off. That's one tough nut. They are thin enough to use a guitar picks, and each one has been drilled near the edge.

Not sure what sort of red material that coating is. Wonder if it can be soaked in something to remove that red substance? Maybe vinegar, to remove the red dye/coating.
While i can´t help with the Nut´s coating, i am relieved to hear teh stuff made it safely to your door!
I´m looking forward to read about it in some other thread ;-). -
Mate that looks GREAT

Peter any problems with the nut material getting through Oz customs being organic & all that
Does the dye seal it & make it ok to be brought into Oz

didn't have any problem, can't remember what they put on the customs declaration.
Any secrets to getting the red dye off? That stuff is thick!
Heard not to soak the pieces as they can split and pull apart after gluing. Didn't read that before soaking two test pieces in white vinegar. The pieces came out with a slight spoon-shape to them but the dye did <u>not</u> budge.
Also read the nut is quite porous and absorbs.Did you oil it or rub a varnish the scales? I was considering a satin varnish finish.
Waiting for the wood. Thinking of going with one of these two crosses, or a roo. Undecided yet.
Could put the roo on the fat end, but not sure. This is my first time making SAK scales.Note: That's what a Tagua Nut looks like. Read they aren't more than egg sized. The tree is a palm.




-
the dye isn't thick, but it has soaked into the surface. When I did the inlay it was only to about 2/3of the thickness of the "ivory" so all the red got sanded off when I was shaping the scales.
-
Found out that the White Tagua Nut Slices are not dyed nor have any coating on them. Can save time on the whole 'sanding that thick dye off'.@Wanan Beads said:
Yes, Tagua Slices White is natural color. Not coated with any dyes.Silky Oak blanks arrived from Turning Timbers of Australia

Still awaiting the 1.5mm x 2mm flat round neodymium magnets.
Amazon/Magnetman -
Had just enough width to cut two scale blocks.

Used the Leatherman Rebar as its saw blade was only a hair more thicker than an hacksaw blade. Also allows me to cut long and more straight than with a coping saw - which I don't have on hand.

Will potentially have two pairs of scales once cutting their width in half. Went ahead and sacrificed the cellidor scales of a Spartan to use as a physical template.
As I was laying the cellidor scales over the wooden blocks I noticed a small issue. The pen's thumb-nick (head) is not shaped in the expected position.Flipping over the pen with the flat side facing upwards...

As opposed to what looks correct on the other scale facing as it would fit, flat side down.

So, umm... did the pen thumb-nick get changed recently? Or are there now two versions of scale pens??
Pen, curved side facing up...

Pen turned to one side.

Though this is a minor issue am starting to wonder which scale to put the pen channel in. The tweezer scale, both scales, or put the toothpick & tweezers on one and pen on the other? -
How to insert the pen into the scale slot. For those that have never seen a Plus scale pen slot. Courtesy of PTRSAK for using his photo.

Question: Are the Plus scales thicker than the standard scales, to make room for the thickness of the pen?
-
How do you all create the holes for the scales? Are they a loose, tight, or more of a snap-friction fit over the brass rivets? And do you only glue or epoxy the rivets and nothing else?
Am still figuring an inlay. Will have to either battle the red dye substance, or wait for the undyed to arrive before doing much of anything else. Wanting to get plans laid out beforehand. :D
Should be working on the templates for said holes tomorrow. Then figure a method to create a curved channel for the pen. Not sure if any store has that small of a rat tail file here locally.Wishing had some spare/scrap 91mm aluminum scales or liners to use for templates. That would really be the bees knees!
Still waiting on the magnets to arrive... Had read a feedback where one other person ordered magnets & they had arrived 3 weeks later.
PS: How thick are the Plus scales?
-
Trying to find Tung Seed Oil proved elusive today. There was that fake Minwax stuff at Home Depot, yet no one here had the real juice. Two stores did have boiled Linseed oil. Yet to get the real McCoy had to place yet another online order. Found a 2 ounce bottle of it on Amazon, for $4.

While at Home Depot picked up a few supplies: Locktite epoxy gel, drill bits, sandpaper, Elmer's wood glue (mix with sawdust for filler if needed). Also found a manual sliding caliper in mm & inch measures for $8.

-
@Xelkos said:
Trying to find Tung Seed Oil proved elusive today.A bit off topic but if anyone in the US needs supplies for finishing wooden scales like these, let me know. It's what I sell for a living, and I can get a good price on all sorts of stains and finishes.
Sorry but I'm sure I wouldn't be able to ship overseas.... :( -
@Xelkos said:
Trying to find Tung Seed Oil proved elusive today.
A bit off topic but if anyone in the US needs supplies for finishing wooden scales like these, let me know. It's what I sell for a living, and I can get a good price on all sorts of stains and finishes.
Sorry but I'm sure I wouldn't be able to ship overseas.... :(Rats, wished I knew sooner. Live in Idaho myself. Only my inner essence lives in Australia. :D
-
Was trying to get two sets of scales out of the first blank, and guess I did not not allow enough working room.

As was fitting the first set of scales to the Spartan's pivots. Fit the top side along right on the metal edge, then looked at the bottom and can see maybe 1/16" of metal.


Could mix some glue and sawdust to help fill those minute areas, or cut a few thin strips then glue along the edge and work it down. Not sure where our clamps are packed. Put so much into this project, trying to work slowly and carefully... then this.
Looked at the second set and them too look like they will be affected the same. Though I cannot achieve perfection I do try to be close enough and to allow room to work with. As such have one other blank to cut. But...
Do I try and offset them to cut two more blanks, or..

Just cut one for my main knife and hope it works out better. May end up having to buy a hacksaw thin wood cutting blade. Hate not having a shop to work in. Did not think this was going to be so complicated. :ahhh

-
Took some strips of wood out of a square left-over block, and used Elmer's Carpenter's Wood Glue to stick them on those bare edges. Once that set to a handling state went ahead and added more glue, pressing it into the corners and gaps with a small flat screwdriver. Followed by silk oak sawdust squeezed into the glue.
Will let those sit till some time tomorrow and work them down. Not fond of doing it this way but it should work. Is how I repaired chips in wooden boomerangs. Since the scale parts are on the bottom and on the edge it shouldn't show up.
Undecided as whether to do the same with the other scales, or cut a new set allowing plenty of room to work. If I do cut another set there will be working room and then some.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login