3 part butterfly opener - plier and scissor heads
-
Also, here's an concept of the stacking.


-
Very interesting and unique mods!
So the thought here is that in one layer, you have the pliers at one end and the scissors at the other end. And the handles for each are on either side of this single layer.
-
-
@livan said:
Why quietly? let us who are more ideas in two clamping heads. I've come up with four ......

Careful where the pivot rotation is on your pliers. Looks like your disengaged, folded in plier head will prevent the engaged head from opening.
There is merit to the idea just needs some thought on function.
-
you want a clarification in such a simple sketch? Well, at the words, imagine that the clamping heads are oval hole in connection with the arms. Play in the right direction is chosen as the compression of excessive motion, a leaf spring formed by a cut in the handle.
-
@livan said:
you want a clarification in such a simple sketch? Well, at the words, imagine that the clamping heads are oval hole in connection with the arms. Play in the right direction is chosen as the compression of excessive motion, a leaf spring formed by a cut in the handle.Metropolicity is right. Look at your design again. You can't open the pliers. The motion of opening the pliers also compresses the scissors to a more closed position. Neither of the two can be opened.
-
Everything works, usually in the classic design of the parallelogram, the only thing you need to lengthen sections of the tool axis to the handles for greater divergence of sponges.
Below I describe a method of mobility in another plane of the axes tool-handle. Translator can not right? -
Yes but in parallelogram the pivots should move to the sides to compensate for the opening. Here the pivots remain in place so the sides also can't move.
-
Apparently the translator ...... Imagine that the axis of the tool holder for the tool in the passive position has two ploskostyah.A for the active tool is tough. And it works. (I did the model)
-
unfortunately only show the day after tomorrow ........ Only then I will be there where it is. :-[
-
Not what I had in mind. The point is that even with large pliers and scissors, they fold away to allow the tool to stay compact.
-
-
(referencing the head design on previous page...)The head design on this turns a 'Mr. Pinchy' into a 'Mr. Mangly'. Imagine the skin of your palm crammed into those scissor blades while working the pliers. Interesting idea, but I think it needs to be dropped.
-
@Lynn LeFey said:
(referencing the head design on previous page...)The head design on this turns a 'Mr. Pinchy' into a 'Mr. Mangly'. Imagine the skin of your palm crammed into those scissor blades while working the pliers. Interesting idea, but I think it needs to be dropped.Agreed!
I feel bmot's suggestion is currently the strongest. In order for it to function is would require an S or Z shaped "backspring" running across opposite corners and offset pivots. Also, there's nothing to stop that being repeated in subsequent layers to allow almost full length tools to be incorporated such as knife/saw/file/drivers. If well planned, it might even be possible that the length of the pliers and shears could exceed 50% of the overall tool length and slightly overlap when stowed with the spring running between them
-
@50ft-trad said:
@Lynn LeFey said:
(referencing the head design on previous page...)The head design on this turns a 'Mr. Pinchy' into a 'Mr. Mangly'. Imagine the skin of your palm crammed into those scissor blades while working the pliers. Interesting idea, but I think it needs to be dropped.
Agreed!
I feel bmot's suggestion is currently the strongest. In order for it to function is would require an S or Z shaped "backspring" running across opposite corners and offset pivots**. Also, there's nothing to stop that being repeated in subsequent layers to allow almost full length tools to be incorporated such as knife/saw/file/drivers. **If well planned, it might even be possible that the length of the pliers and shears could exceed 50% of the overall tool length and slightly overlap when stowed with the spring running between them
Indeed, that´s what I was thinking, practically a Wenger Ranger-like design, where the other tools/blades could be in other layers.
-
What if the Plier/Shears layer is just left alone with a configuration similar to the Bear Jaws/Swisstool with both external handles having a Wave like fold for outside opening tools?

-
This is how it may look with tapered ends which could include driver bits or bit holders

-
I like the original design by Raukodur best. I would buy one of those!
-
Very nice design work, Ombudsman.
I notice a bit SOG Powerduo influence there. I'm not sure if both the full sized pliers and sheers would fit in the middle handle though. Might need to make them a tad smaller. 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login