30 Day Coghlan's Campers Tool Challenge!
-
:D You're welcome
-
You are doing Gods work son.

-
Loving your reports mate. :D
-
Day 26
Today was Jothra Is A Meanie Day! I used Campy for all kinds of things, some of which I happen to know are very bad ideas, from a tool longevity point of view.First thing upon arriving at work, I unlocked the most important door on site, which someone had locked overnight for some reason. This is the most useful the large screwdriver has been:

If a Porta Potty door doesn't open, it's really just a smelly paperweight.Then, after some dry-pack grouting (fun, if you're dumb like me), I had to break off a bunch of form pins from the original foundation pour. Normally this is as easy as hitting them a couple of times with a hammer—in today's case, a mini-sledge—but one pin was bent down so close to the wall that I needed to pry it up before I could even hammer it:

See how bad an idea this is? This is a really bad idea.But, maybe surprisingly, it worked, and I finally hammered off the blasted pin:

I've only very rarely pried with the plier tips, because breaky breaky!Next, while working on the pin-smashing, I found a column base I had grouted, but forgot to clean up:

Maybe it's not important, but I like to leave a nice, clean-cut column base.My margin trowel was way on the other end of site (and it's a big site). What to do?
You're not going to believe this, sports fans, but the fish scaler actually did something useful, like, for real.

The picture doesn't really do its awesomeness justice.Finally, someone remembered to bring the grinder, but it needed a blade change. So, do you think we had the special grinder wrench on site?
Bwa ha ha! No.
Good news, though! A time-tested trick performed by no fewer than three (3) of my different Leatherman tools:

No grinder tool? No problem! Like a charm!Don't worry. The grinder was unplugged at the time.
This was a pretty punishing but successful day for poor ol' Campy.
-
I agree you have good write ups. And your added jokes in italics are very funny. 
-
@Lynn LeFey said:
You're not going to believe this, sports fans, but the fish scaler actually did something useful, like, for real.

I still won't be running out to buy tools with fish scalers, but I guess the trick is to use the tools you have, not the tools you want.
Thanks, everybody! More grouting tomorrow? More steel tie-wire? More grinding? A nice panini? Stay tuned!
-
I just tried taking the top off of a soda can with my can opener (on the same tool with different name plastered on it). Strange thing happened... after about 4 or 5 cuts, the top started to split cleanly along a seam, like the pre-scored area of a pop-top. The whole top came off freakishly cleanly. I'll see if I can get pics in the morning.
-
Sorry for the double-post, but here's a pic of the can mentioned above.
The opener started in from the edge, and began creeping toward the rim. Then by the forth or so puncture, it started splitting cleanly along a seam. When I got back around to the start, it removed even most of the bits that I'd missed to start with. Very, VERY clean. Freaky.

-
I'm having trouble replicating your results, though I still get a pretty clean cut if I poke into that little trench thing.
-
I have no idea if my results were typical, or if it was just this canning facility, this particular batch, or what.
Also, if you just cut the lid off normally, you can use the handle of the tool to press down the jagged material inside the lip of the can to make it a little safer, if need be.
-
@Lynn LeFey said:
Also, if you just cut the lid off normally, you can use the handle of the tool to press down the jagged material inside the lip of the can to make it a little safer, if need be.Agreed!
Anyway, work got called on account of infinite mud after last night's torrential downpour, so Campy and I are off to do some bike repair.
-
So... I tried to reproduce the top removal, only this time with some cheap 'Super-Chill Diet Cola', because, obviously, it wasn't going to work again... except it DID. :o

This time, I let the tool in question, my 'High Uinta' branded tool, creep into frame.
I... seriously... I have no idea what's going on. Okay. That is all. I won't hijack your thread any longer. Carry on with the fine work.
-
First, this thread belongs to the world. Hello, world!
Second, we have an interesting development, can-wise:

Clockwise from left: Diet Dr. Pepper, Coke Zero, and Diet Crush.Both Dr. Pepper and Crush are doing exactly what you described, while Coke Zero is not. My earlier failures were with Coke Zero and Cherry NOS. If you look closely at the picture, you might be able to see the shallower angle of the can top immediately inside the lip of the Crush and Dr. Pepper cans. Since these two are both Pepsi products, while Coke Zero and NOS are both Coke products, I think we can assume it depends entirely on the plant or line the bottles are manufactured in/on. It has nothing to do with Campy's abilities after all.
Problem solved! Go team!
Anyway, back on topic: the large slot screwdriver helped me hold a tire off the rim so I could use another tool to slip off the rest of the bead. Easy-peasy, lemon-squeezy.
-
Haha we are such thorough people here. Now I know the difference between the rims of coke and pepsi cans.
-
I have had that experience with aluminum cans before. I think it is more to do with it tearing due to the strain put on it whilst you are using the can opener, (It is a can opener after all) kind of like how it is easier to tear paper towel semi-neatly along the perforations. Because some of he work has been done already.
-
It's Day 28, and it's a very merry Grouting Day! Because of the bewildering variety of seated, standing, and squatting positions an entire day of grouting entails, the only thing in any of my pockets was Campy. Was Campy up to the challenge of doing...well...everything?
We were off to a good start with this rigid insulation, which made the mistake of being in front of the column base I was after.

Wait, is that the...no. He wouldn't use that again!Since the nearest saw was in my satchel, which was uncharacteristically far away, I decided to try the fish scaler. After all, the tool is shaped like one of those dull, saw-like pumpkin carving knives you give to your kids before you trust them with anything sharper than a boiled egg. It wasn't as clean as a saw cut, but it did the trick, and I used it like this for the rest of the day. This is, of course, the second time in the history of the entire universe that a fish scaler has been useful for anything.
Next up was a new water scooping cup...thingy. As per our earlier discussion, I hunted down a Pepsi can, which was easy to find, since someone is littering them around the site with alarming frequency. Seriously, someone out there must be drinking 30 litres of cola a day. Anyway, this ought to give some of you a thrill:

Hey, there's a multitool in my Pepsi! I demand a refund!As you can see in this picture, even before morning coffee Campy was rife with grout dust. Good news: it washed right off, and everything's shiny again.
Finally, here are some of the scarier things Campy had to do today. The first Scary Thing was batoning. This is something I usually don't do. I've done this while firestarting in the woods, because sometimes you stupidly forget your axe. My tamping stick was twice as thick as I needed for two different columns today, so I needed to thin it up:

Bang! Bang! Bang! is the sound of my margin trowel's handle mercilessly smashing down on the end of Campy's blade.
I had to use an actual saw for this part, so a big hand for the Outrider! Yaaaaaaaaaay!So, batoning worked out. I wasn't sure how handily Campy's blade would survive it, but I don't see any damage. Good thing your blade doesn't have to be too sharp for this one.
Finally, I needed to flatten the point on the back end of my tamping stick (the thick part that I kept) so I could tamp in an odd corner. Pliers, I choose you!
Then I cleaned it up a bit with the knife blade, which was only mildly terrifying without any kind of locking mechanism and an edge as sharp as a $30 suit:

dontfoldupdontfoldupdontfoldup...And thus ended Day 28!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

:D :D