Livarno, Romisen, C8, Small Sun cheap HID torches
-
The second one today is a diving headlamp. I sometimes take pictures or use a speargun when I am diving/snorkeling and thus would like to have at least one hand free. The headlamp seemed like a good idea.
I chose the XML-T6 version, with no zoom as the price seemed reasonable.
It is a nice looking light with a head strap, rubber, and the ability to change angle, as with most such lights.
From [url=http://forum.multitool.org]multitool[/url] (http://www.[url=http://forum.multitool.org]multitool[/url].com/CREE-XM-L-T6-1800LM-Diving-LED-Flashlight-Headlight-80M-p-86720.html) :
**1.Diving flashlight, specially designed for the people who are crazy with diving.
2.With its outstanding performance, it is widelu used in personal diving and camping trip, underwater hunting and so on
3.The headlight suitable for any type of underwater lighting needs. Waterproof up to 80M, can be set to constant or flashing lights (AAA adapter)
4.Internal wiring applies the high efficient booster circuit, working voltage is wide and can utilize the batteries in the largest extent.Specification:
Product name: CREE T6 1800LM LED Diving Flashlight Headlight
Emitter Brand/Type: CREE
Emitter BIN: T6
Mode: high /low / strobe
Battery Configurations: 3x AAA/1x 18650 3.6v/3.7v battery ( not include battery )
Switch Type: Twist (Twisty)
Brightness: 1800LM manufacturer rated
Color: green
Weight: 150G
Size: 33mm diameter**The two side caps can be removed to insert the batteries and so can the head. Thus, despite the rubber rings, you have a lot of possible water entrance points.
It has 3 modes, and secret SOS mode, operated my a magnetic switch on the top.
The head is made with nicely polished aluminium.
The reflector on the pill is also very nicely polished.
Despite taking 18650 LiIon batteries I would not feel comfortable using it in salt water with them as there is always the chance of a short circuit. Thus in the sea I will just use 3AAAs.
The pill looks like a standard drop-in.

Inside the plastic it has a full aluminium tube so it is pretty solid.

Again the pill has no contact with the aluminium head, You can see here the layer of clear plastic inside the head. I wonder how hot it will get.

The beam has a big and uniform spread, because of the LED’s size and the nicely polished reflector.
Here you can see it on the right, compared with the other diving lights shown before.

And with the Xtar.

It is not bad but I worry about the heat dissipitaion and the possibility for water to come inside. Lets see how it goes.
-
So a dive light that one should "not put it in to the water".

Interesting. ;)
-
Great review's dks
you got me thinking.
-
@enki_ck said:
So a dive light that one should "not put it in to the water".
Interesting. ;)
Only the switch.. :D I have no idea why they said that as it is magnetic and whether you use it in water or out of it should not matter. I assume they copied it from the instructions you get in 50m Casios about not operating their buttons under water.
Thank you Ja... now read all of them. :D
-
A few weeks ago, inspired by Grant, I ordered one of these:
SL-2001A diving AAA penlight in yellow. from DX
On the box there seem to be several available colours to choose from
It uses a typical 0.5W LED and gets power from 2 AAA batteries. It looks very similar to what doctors have been using for years to examine your mouth.
It is basically a two part construction. The plastic body with a copper metal running inside it and the opaque head with the LED. There is a rubber o-ring to keep the whole system sealed.
You twist it clockwise to turn it on and anticlockwise to switch it off. Single mode, claimed to work for 4 hours on a set of batteries, which is not really that long.
With these lights you need to twist it a bit more, after it switches off to make sure that if the head gets pushed down during storage or carrying the light will not go on. Purely mechanical system.
The light feels light and solid enough, for a cheap plastic torch.
It has a plastic clip and a lanyard hole and came in a decent enough box with English instructions outside and inside the box. It also has a phosphor dot at the end, so that it can be located at night.
It is reasonably bright (good enough to check inside someone’s mouth).
In theory the whole design should make it waterproof. The weak point is the single o-ring. Overscrewing and damaging the head or the threads is also a possibility.
DX says it should be OK for 20m, and it does seem decent enough for some snorkelling or for using it in the rain, thus protecting your more expensive tactical and pretty torches. (the ones you buy and never really use but tell everybody about how strong and great they are.. :D )
It is thin but its length makes it feel fine in the hand and it should go in your pen pocket easily, when not needed.
So, instead of buying a boring penlight you can have a nice colourful one that is also waterproof. Or you could get a **Cree LED ** torch for the same money or just a bit more.




-
I have left it in water, in the sink, for several minutes and no water came in so it is waterproof enough.
However, I am now pretty sure that it does not have an LED, but a regular incandescent light bulb, producing the usual orange tinted light. The pill is stuck in the head and it seemed like it had a bubble shape in the inside for the lamp, but it seems that that is just the actual standard lamp shape.
It appears to produce about 10Lm, which seems reasonable. I have contacted DX to see what they think.

-
Starry Light SA-22 BLF edition

This torch has interested me for a bit so when I remembered I decided to get one.
The SA-22 was available originally with the usual 3 modes and two disco modes, cool white Cree XM-L2 U2 emitter.
Original modes: Low(150LM,12h)-Mid(400LM,4.5h)-High(880LM<2.25h)
It is/was still available in this version from Wallbuys, for $23. For a premium, similar product the **Fenix LD41 and Jetbeam PA40 **offer similar performance/style, at 3 times the price but they should be even better quality.A different version was produced, as a special for Budgetlight forums (relevant thread: http://budgetlightforum.com/node/28859 ),which had just 4 modes (including a very low one) and no flashing modes. A Neutral white emitter option was also added.
The PWM of the BLF version was improved, so as to be unnoticeable. The specifications were:
4 modes, LL-L-M-H (0.2%, 2%, 25%, 100%), with memory, no blinky modes!- Fast >2kHz PWM (maybe 10kHz), making the lower modes usable
- Longer runtimes due the better mode selection
- Neutral white XM-L2 T6 emitter
These were still available from the BLF linked site and were on offer for $20 plus shipping, which is a very good price.
I like the idea of a new emitter, being driven by standard AA batteries, 4 instead of the usual 3AAA you get to use in 18650 Li-Ion torches. Friendly and easy to buy batteries, with the XML brightness. You can use alkaline AAs as well but the current needed to drive the LED may be too high for them, so I would stick with Ni-Mh AAs.
Having already bought some 4AAA diving torches and seeing that they were good in the hand I ordered one, and it arrived in 2 weeks, fast. I did not pay any extra but it came with recorded delivery.
So the torch arrived in decent but crumpled box with instructions and a spare O-ring. It also included a decent, sheath. The box/specifications and the instructions are for the original model.



The push button (no momentary-on) controls the modes. It has a memory mode, provided you leave it off for a few seconds (off- memory mode).
It can tailstand.
You go through the modes by pressing the button gently (more gently than with most similar switches).
113.7g without batteries

It has reverse polarity protection and the pill in the head will only go in one way. (notice the grooves in the pill that have to match the ridges in the head.

The body has signs showing you which pole goes in, rather than which should stick out, which can be confusing.

The head is made from aluminium and it is a solid heavy thing. The emitter is centered and the reflector deep and polished. Glass lens.
The anodising at the point where the head meets the body, when screwed in was a bit worn, but nothing too visible. If you look at the pictures of the whole torch you will see the faint grey parts, on the black head.
The body is made from good quality Nylon but as the head is Aluminium you need to be carefull when you screw it in so as not to damege the threads (cross threading). The threads and the overal construction are very good, especially when you realise that this costs about the same as an Fenix E05 etc. Note that the head is dark, mat, black whilst the body is a slightly lighter, greyish colour. They could have easily made the head the same colour as the body. No biggie.
The most important for me is how good it feels in the hand. I have large hands but the flattened body feels much more natural than the usual circular bodies you get with torches. (knives, swords, pistols etc have similarly shaped handles, for a reason :) it works ). I could have done with a slightly fatter body, still flattened, but it should be fine for most people.
The Nylon feels really grippy too. There is also a slope near where the body meets the head, so that you hold it the right way up, also adding to the comfort. More torches should have flattened body.
The Lanyard and the sheath are good, similar to most, decent, ones you could buy. Not premium but good.
When compared with the Romisen RC T601 in a small dark room (OK, Toilet) I initially thought that the Romisen was brighter as it had a stronger hot spot. however when I reflected the light from the ceiling it was obvious that the SA-22 produces noticeably more light and a much nicer coloured beam.
This torch produces a nice, "wall of light" uniform beam, with still plenty of throw. It will light objects uniformly, at a large distance. To test it, it was given to several adults, and most importantly several children, to go and play with in a dark large open area. It came back after a few hours with plenty of battery charge left and no damage or complaints.
The fact that on several occasions I had it on medium, rather than bright thinking it was the highest setting shows how bright it is. Of course, once you realise the mistake and go to high the difference is noticeable.
On high the head did not get too hot.
PWM was impossible to notice. It gives the best impression of a current regulated torch I have seen.
The low mode is a few Lumens and is not as low as you would assume by it 0.2% rating. It appears to me to be around 10+ Lumens and is good enough for going round the house at night. It is similar to the beam brightness of a standard incandescent torch. On that mode the light should in theory stay on for a few weeks.Lowest beam:

and lowest beam (right) compared with the lowest beam of standard XML torch (501B). Lots of difference.

Also their high beams. Despite the fact that the 501B is not a thrower the SA-22 has a much more uniform beam, whilst still maintaining a bright hot-spot.

Some comparison pictures with a 4AA torch:


and a 2AA one

With an 18650, thrower.

Notice the difference in head circumference. The SA-22 has a smaller head for more beam spread.

BUY one!!! A proper XML cree, driven at proper current, using common batteries, in a sexy package.
-
-
I took some torches to the beach and tested them in the water, up to a depth of 3m, whilst swimming/diving at a reasonable speed.


The two classic cheaper diving torches (4AA yellow and red) worked fine. They both produce a narrow, bright beam, useful for looking into the hiding holes of fish, or at a distance of a few metres.
The water did not manage to get in, so they worked fine. No noticeable temperature increase.
The one I was a bit worried about was the headlight, as it has 3 potential openings for water to get in.
To be on the safe side I used 3AAA alkalines in it so as as to avoid any surprises from LiIons or destroy any rechargeable batteries, if the water managed to get in.
This limited, noticeably, the brightness of the beam. It was still brighter than the other two though.It worked well and enabled me to take pictures and swim with a free hand.
The beam is nicely spread with a middle hotspot, enabling you to see in opening but also see more around you. The uniformity of the beam means that you can make a video or take pictures without having the centre part "burned" from the high hotspot.
The position, on the top of you head, means that if you use a mask with clear silicone some light will get in and may get annoying. Also it means that there is not a lot of space to secure it, above the mask, so it may come off during fast movement.
Still, if you are not using flippers, it should stay in place.
At a depth of 3m


Some general comment for anybody using their torches underwater.
Do not spend more than you are willing to lose, as there is always the chance that you will lose your light or that they will get water in them (most will sink and not float)
Tighten them to the right amount. Too little and water may get in, too much and you may damage the threads or move the rubber seals out of position, on cheaper torches.
Many will have a switch movement that appears stiff out of the water. Do not worry as in the water, because of the lubrication provided by the water, they will work much smoother/easier.
After use rinse them with clean tap water and as soon as possible immerse them in a water bath for a while so as to remove all salt water. The salt, if not removed, will form crystals which can push part of the head etc apart.
If you have used sunscreen then use soapy water too.
Let them dry well before opening them. Wash your hands before opening them.
After opening them, again give them a quick wipe inside out and let them air dry for a bit.
Lubricate the rubber seals, contacts etc when needed. If the seal dries then water will get in.
Even if salt water gets in you may be able to save your torch if you immerse it in tap water for a few minutes and then dry it quickly, with a towel and in the sun
Note that some diving torches will get very hot out of the water. If possible avoid using them for too long out of the water.
When I got out I used the SA-22 as my beach torch (which still did get hot..) -
Reporting for reading/commenting duties. >:D
Glad they worked ok and some excellent advice on salt water and flashlight maintenance.

-
I think Gareth saw this post so I do not expect any more readers. :D
-
Very cool. 8)
I actually really like the look of the BLF light, but I'm totally struggling to come up with any justification for it.

-
I actually really like the look of the BLF light, but I'm totally struggling to come up with any justification for it.

Because you work hard and YOU are worth a treat.
- The sa-22 runs on AA batteries, has very good quality, is bright with a uniform beam and is a lot cheaper than similar offerings from other makers. Looks unusual and is good in the hand with decent modes. 18650 power with AAs.
I do remember you complaining about lights using only 3 batteries... well this uses 4.
- The price seems to have gone up now, a bit, and the web site is a bit unstable lately, and there seems to be no NW ones left...
- The sa-22 runs on AA batteries, has very good quality, is bright with a uniform beam and is a lot cheaper than similar offerings from other makers. Looks unusual and is good in the hand with decent modes. 18650 power with AAs.
-
Another XML-U2 torch, $9.99.
Ultrafire F13

I got it because of the emitter and the fact that it looks good.
Big cooling fins, which is nice.Specifications:
Emitter Type: XM-L U2
Battery Type: 26650, 18650
Battery Quantity: 1 x 18650 / 26650 Battery (not included)
Mode: 5 (High > Mid > Low > Strobe > SOS)
Mode Memory: No
This feels really good in the hand, because it is designed to take the 26650 batteries, so it has a thicker body.
The finish is good and the internal components look well made. It feels very solid, definitely a lot better made than the cheap XML lights we were getting 2 years ago.
I was surprised by the fact that this was the 1st cheap torch I got that had a plastic protective film on the lens that had to be removed. It shows that they care.
It says XML-T6 on the body, which is a bit worrying, though I think that they have used the newer U2 emitter in an older tube.
It came with three 18650 sleeves, for some weird reason. It has some glow in the dark rubber sealing rings, inside and around the lens. The modes look workable and moving through them is done by pushing gently on the robust feeling rear button.
Compared to the SA-22 it has a slightly more intense hot spot and a cooler light. Nice beam.

The Sa-22 is more than double the price, but feels nicer.A good buy. A cheap, nicely made, torch that is bright with a nice beam and sexy looks.
-
Fun, Fun, Fun.
$1.50.
Comes with 3 LR44 batteries.

Aluminium body with plastic head and tail cap.
The construction is fine but the buttons are a bit flimsy.
The LASER is bright (5mW supposedly) and can be seen on buildings a few hundred metres away. Impressive. There are some artefacts in the beam.

The LED is very bright, for its type.

The UV light is not very bright but works OK, showing the watermarks of money.

It has two buttons. One switches the LASER on, for as long as it is being pressed.
The other one controls the LED and the UV light in sequence.
Apart from the low quality switches there is nothing to complain about.
An extremely fun torch; possibly the most fun torch I have.
There are some other similar models, for more money, but I don not think the quality will be any different, unless you pay 10 or more times more. The batteries may cost more than $1.50..
Buy, buy, buy!!
-
Another Laser, green and more powerful but also bigger.
YL-Laser 303
When I bought it it claimed to be 100 to 200mW (Chinese Watts ;) ) .
I got it for about $8 from [url=http://forum.multitool.org]multitool[/url]
http://www.[url=http://forum.multitool.org]multitool[/url].com/G303-Adjustable-Focus-532nm-5mw-Green-Laser-PointerLight-Star-Cap-p-942235.html
Most lasers of this style and power are around $10.
Green is considered to be more visible than red. Runs on 18650 batteries.NOTE: As I discovered after getting frustrated for 20 minutes, the battery goes in the wrong way round. The -ve goes in the body, rather than the +ve ....
Specifications from the sellers site:
Product name: G303 532nm 5mw Green Light Laser Pointer
Body material: Aerometal
Power supply :Power supply : 1 x 18650/1 x 16340 battery(not included)
Wave length: 532nm
Laser range: 200~5000m
Working voltage: DC=3.0-3.7V
Charging time: 3~5 hours
Spot size: 6M place <φ10mm.
Power: 1-200mw
Dimensions: 126x22x22mm(without the extended tube)
/158x22x22mm(with the extended tube)sticker:

It has a key to allow its operation and switches on with a press button, only for as long as you keep it pressed.
Compared to a keychain model:



10 times heavier...
It has a zoom function, for a thicker or narrower spot.
It also comes with a diffraction attachment for pretty effects. At night you can turn the whole neighborhood into a magic place.
in pieces:


The switch was not working OK so I just soldered the whole system, so now it operates with just the push button.


Comparison beams with the keychain red laser.
Fat spot on the 303:

Small spot setting:

Difference in brightness at 30m, in DAYLIGHT.

The 303 is clearly visible in daylight on buildings a few hundred meters away, a significant increase in power compared to the red, keychain model.
At night it will put a bright spot on objects, as far away as I could see.

Definitely worth it for the fun factor, though the beam is visible by all at night so not very stealthy.
For safety I live the diffraction optics on, so that the beam is divided into many small spots, when I am not using it.
Not a toy for children :D
-
Why is it that I* really* like the fact it has keys? :D
-
I think it is a US legal requirement.
You have the keys (which are small and easy to lose) and the reverse battery insertion, so it is pretty safe. Unfortunately, by the time I realised how the battery goes in the switch (though it worked, according to my multimeter tests) was not operating the laser properly. I may have moved the connectors or maybe they were bad to begin with....

So I just overrode the switch..
Now, where is the other reader of this thread? :D
-
-
I was worried....
OK, see you two next time

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


