'Les Stroud' Engage Multitool TEST TO DESTRUCTION!
-
Maybe it could be forge welded into a usefull knife. Na I like the idea of shooting it better. Who knows if the welds will even take its not like its high quality steel like you find digging at the scrapyard or lying on the side of the road.
-
I would like to see the "Tim Leatherman Nail Cutting Test". Is that possible?
-
Saw of some nice big branches and then baton them with the blade.
-
Some actual scissor testing.
Just to recap, in my initial review, I called these the worst scissors I'd ever tested left-handed.
</topic/51479
So, here they are, after cutting various paper materials.
Versus Paper: Right handed, pass. Left handed, FAIL. YOU FAILED PAPER!!!
Versus light cardboard (the yellow stuff): Right Handed, barely adequate. Left Handed... FAIL.
Versus Corrugated Cardbaord: Right Handed, barely adequate. Left Handed... you guessed it. FAIL.And the whole time, the spring kept popped out from behind the handle, ala what's seen in the pic.
I don't think I'm going to bother with more difficult materials, and skip right to test-to-destruction with these things.
So, how about the tool's scissors versus the tool's sheath? Okay, I tested it, and a number of other MTs, versus this tool's sheath. The Engage, Vic 91mm, Leatherman Wave, and the Mountain MT from Northern Freight (a $7 MT), in that order.

Huh... strange. I bet you can only see 3 cuts, can't you? That's because after 17 strokes of the scissors from the Engage, (maybe visible above the first real cut), the Engage managed what I'd describe as an abrasion. Then the SAK's cut, then the Wave, then the Mountain, which, to be fair took about four strokes to make its cut. And the SAK was one I got off of ebay for $6!

I hate these scissors so much on the Engage, I can't even put it into words. So... let's see what I can find to test them to destruction.
-
The requested Leatherman Nail Cut Test will interrupt the scissor testing for the moment.
Here's the Engage versus the Sidekick. I'm going to be honest. The Engage's cutters did the task, and took noticably less effort that the notoriously not-great anvil cutters of the Sidekick.

That's the GOOD news for the Engage. The bad?

Sorry for the blurry. See the 'shiny spot' at the base of the wire cutters? Yeah, there was some damage. None to the Sidekick
These were also pretty small nails. I'll get a larger on from the garage for further testing.
-
So... I went out into the garage, to get MORE nails.

Both the Engage and Sidekick cut through the trim nail.
Then I got to that roofing nail.
I had to press the Engage against the floor of the garage to generate enough force to cut the roofing nail, bit it DID IT... kind of.
The result is that now, when the handles are fully pressed together, the plier head doesn't close. FAIL!

And just so you all know, I ALSO cut the roofing nail with the Sidekick. The anvil cutters of the Sidekick required even more force than the Engage's. I was LITERALLY standing on the handle of the plier to push it closed. I was applying probably 150 lbs of force when the Sidekick cut the nail, and something more like 100 or less when the Engage cut through.There is absolutely ZERO damage to the Sidekick. While I would consider this test abusive, it also makes me REALLY appreciate how well the Sidekick is made. Not so much with the Engage.
I didn't bother trying the largest nail, since the Engage is pretty well done with any nail cutting, or fine plier work, from now on.
-
Question: Can you 'baton' a #2 pencil by sticking it into the scissors, and hitting the upper scissor blade with a hammer?
Answer: Yes.
These things are always good to know.

-
:D
The scissors seem slightly "out of shape"
-
This thread is great! Keep it up!
Also it's nice to hear the sidekick can take some abuse.

-
This is good. Need to find my snacks...
How about running it over with vehicle? >:D
-
@Kin-Luu said:
Saw of some nice big branches and then baton them with the blade.Your wish is my command!
Here's the Engage, again versus the Sidekick. Both cut a 1.25" (32mm) branch.

First, I think this is getting near to prime conditions for testing the Engage in it's intended environment. It's 38F (3C) and feels like 28F (-2). I was not wearing gloves, and the wind was very 'biting'. The Sidekick was less comfortable in hand, but cut better, and the longer reach made for a noticeably shorter time to cut. Not profoundly longer, but maybe 2/3 the time of the Engage. The engage was more comfortable in hand, but a pain in the butt to cut with, and i noticed a measure of blade binding deep into the cut. Still, I'd call it a pass.
As for batoning. Here's the Sidekick...

And here's the Engage...

They both managed to baton the 1.25" piece of wood. The Sidekick did this VASTLY better ,due to the locking, and longer, blade. Also, in both pictures, you can see a technique I'm working on, where I drive a wood wedge into the piece I'm batoning as soon as it will fit. I don't see any point in beating on a blade any longer than absolutely necessary, when making a wedge out of wood is such a simple task. And if a wood wedge breaks, meh.
So, for both tasks, sawing and batoning a 1.25" branch, the Engage passes. I would have been terrified and enraged if it didn't manage these tasks, what I'd consider the bread and butter tasks for this MT.
-
I'm not defending the Engage, but it looks like the saw gave a much cleaner cut, than the saw of the Sidekick.
Keep up the carnage

-
I'm still rather impressed that you stood on the Sidekick to up the force and suffered no ill effect.
-
This is great!!!!

-
@Higgins617 said:
I'm still rather impressed that you stood on the Sidekick to up the force and suffered no ill effect.Yeah. Me too. :o
There's a border between 'bold' and 'stupid'. I'm not sure which side of it I was on when doing that, but Tim Leatherman would do the same stunt to cut through nails (standing on one handle while pressing the other on the ground). IF HE can do it...
Wait, how much did he weigh? :D
-
@Etherealicer said:
I'm not defending the Engage, but it looks like the saw gave a much cleaner cut, than the saw of the Sidekick.Keep up the carnage

It did. I think that was as much about my bad sawing as the saws. But it's cut definitely didn't have the ragged course-change that the Sidekick did.
-
I love threads like this.
There a great reminder to me why I carry a quality multitool.
-
I do wonder if it doesn't need to be on the main page,rather than just here in the forums. Joel's very right,it's a great advert as to why you should stump up for a half decent tool,even if it is only a Sidekick
-
Okay. I know you've ALL been waiting for a REAL test of the can opener on this thing.
So I'm going to make this thing open... a CAN! Yeah, I know. It's asking a lot. Particularly if you remember that in my initial testing of this tool, it COULDN'T DO IT!
So... here's the problem (sorry about the blurry)...

The can opener is WAY the smurf over on the right of the tool, which has thick handles. It needs to be a good deal farther to the left, if it is ever going to be able to engage the lip of the can to function.
Also, if anyone recalls, the 'Mountain' Multitool I reviewed some time back, and mentioned earlier in this thread, had the exact same problem. And the solution is the same. Take the tool apart and move the can opener into a better position.
So, here's the solution...

The flathead and can opener have swapped places. Taking the tool apart only required one alan wrench. Reassembling was just a matter of playing the 'washer stacking game' and overcoming a bit of force from the backspring. This ALSO allowed me to increase the friction of retention, and now the scissors don't automatically pop out of the handles unbidden.
Right. Great, but does it work?
Ta-Da!

Can is OPEN! Refried beans for lunch!
Hey... wait... I didn't want refried beans for lunch. Ah... smurf it! :D
So, with only ten minutes of fiddling, I made it function, and as I said, the Mountain tool had the same problem. However, the Mountain tool cost $7 and didn't have a major company and named backer. Just Sayin'.
Open can after some bull-smurf modding required: PASS!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login