Showcase: Mods to plier-based multitools
-
- Do you own a plier-based multitool and wish it looked better, or that it could do more for you?
- Have you considered or tried modding it, but do you lack ideas and/or has inspiration run dry?
- Do you have specific knowledge and experience to share regarding modding such tools?
**Fear not - the answer is right here in this thread! **
The aim of this thread is to become a centralised compendium of modifications to plier-based multitools and of the resulting modded multitools. There is a related thread limited to Leatherman hacks, however I have found quite a few separate threads regarding Leatherman mods in the Mod Squad board which are not included in that central thread. Also, for one I don't necessarily want this thread to be limited to Leatherman tools per se, and in addition I have reason to believe one should not necessarily limit oneself to one tool make when modding - cross-pollination, i.e. using tools from one make in other makes, may be a good solution to specific modding requirements as well. Hence my inclination to include all plier-based multitools in this thread. Most of these have in common that they are screwed together, and simply undoing the screws will lay the full expanse of the realm of modding at your feet!
**Disambiguation: **
Modding Swiss Army Knives is a specific branch of modding and requires access to speSmurfpillst tools and abilities of a slightly different kind, more fully described elsewhere, than those needed for plier-based multitools, which can usually simply be unscrewed for modding. For the specifc aspects relating to modifications to Swiss Army Knives, please refer to the following threads:
- Bladeless SAK mods
- SAK modding guides
- Show off your SAK modsRules:
Ideally the showcases should include overview-type pictures of the multitool with preferably all tools and functions, or at least the non-stock ones, extended or otherwise exposed. Catalog-type pictures are preferred since these do not distract from the main content, namely the modifications, but there is no objection to pictures in nice photogenic settings, especially if the non-stock tools are shown in action. Detail close-ups may of course be added.
A short description of what it is that distinguishes the modded multitool from a stock one should preferably be provided. Any tools whose origin cannot immediately be identified from the picture should preferably be identified separately.
If a separate post or thread already exists having the particular modded multitool or a particular mod as main topic, a link to any such thread should be preferably added as well.I suggest we use a common template for the basic information. Such as:
Tool Name: (how the modder refers to his tool...)
Basis:
Aim:
Mods:
Links:I'll start with an example...
Tool Name: Leatherman Supertool 300 VX
Basis: Leatherman Supertool 300
Aim: rendering it more versatile
Mods: removed the fixed Phillips, the small and medium flat screwdrivers, the saw and the file; ground down the awl to make it narrower; ground a small indent into the wide flat screwdriver to make a mini pry-bar; inserted a blade exchanger from a LM ST 300 EOD, a saw/file blade exchanger from a Surge, a pair of scissors from a LM Wave and a bit driver from a Surge in the handles as well as attaching a small bit driver (heavily ground down) from an older Surge externally at the plier pivot using a (new) Wave pivot and a ground down washer, and sticking onto the handles two self-made 3d printed black plastic ABS tweezers/toothpick holders to house (currently) the longer version of the Victorinox tweezers and the Victorinox toothpick (plus in future maybe a Firefly ferro rod or two).
Links: /post/1548050

As part of today's carry:

Together with its smaller brother Rebar VX (see a future post in this thread):

Hope y'awl like the idea. Any feedback appreciated

-
Great idea DT! Sweet mods too.

Tool Name: MP400 Bladeless
Basis: Gerber MP400
Aim: Making it UK legal
Mods: Blade removed. Woodsaw from Gerber Suspension added. Also metal file from MP600 added. 1/4 inch hex bit modded to fit philips driver. Full tool compliment: Pliers, wood saw, metal file, cap lifter, scissors, philips driver, large, medium and small flathead drivers.
Links:</post/0#new>


-
-
-
@magentus said:
Great idea DT! Sweet mods too.
Tool Name: MP400 Bladeless
Basis: Gerber MP400
Aim: Making it UK legal
Mods: Blade removed. Woodsaw from Gerber Suspension added. Also metal file from MP600 added. 1/4 inch hex bit modded to fit philips driver. Full tool compliment: Pliers, wood saw, metal file, cap lifter, scissors, philips driver, large, medium and small flathead drivers.
Links:</post/0#new>Thanks magentus!

Perfection would be attained by adding at least a pic or two

-

-
@Dutch_Tooler said:
Great idea DT! Sweet mods too.

Tool Name: MP400 Bladeless
Basis: Gerber MP400
Aim: Making it UK legal
Mods: Blade removed. Woodsaw from Gerber Suspension added. Also metal file from MP600 added. 1/4 inch hex bit modded to fit philips driver. Full tool compliment: Pliers, wood saw, metal file, cap lifter, scissors, philips driver, large, medium and small flathead drivers.
Links:</post/0#new>Thanks magentus!

Perfection would be attained by adding at least a pic or two

Donzo!

-
@Dutch_Tooler said:
Great idea DT! Sweet mods too.

Tool Name: MP400 Bladeless
Basis: Gerber MP400
Aim: Making it UK legal
Mods: Blade removed. Woodsaw from Gerber Suspension added. Also metal file from MP600 added. 1/4 inch hex bit modded to fit philips driver. Full tool compliment: Pliers, wood saw, metal file, cap lifter, scissors, philips driver, large, medium and small flathead drivers.
Links:/post/0#newThanks magentus!

Perfection would be attained by adding at least a pic or two

Donzo!

Ta guv'

Sent on my SM-G930F with Tapatalk
-

-
-
Tool Name: Leatherman Rebar VX
Basis: Leatherman Rebar
Aim: rendering it more versatile (inspired by the ST 300 VX above)
Mods: removed the lanyard ring, a washer, the fixed Phillips and the small flat screwdriver, and inserted a pair of scissors and a small and a large bit driver from a LM Wave in the handles. Some minor adjustments planned to the awl (thinning) and the wide flat screwdriver (pry bar notch). Am also considering replacing the file with a diamond version... I have a ST 300 file lying about but that will require quite some grinding.
Links: /post/1577627 - note: tools reordered since I tooks the pics in the linked post; see pic below for current status.
-
This is a cool idea

Tool Name: PST with saw
Basis: Leatherman PST
Aim: To make the tool 100% Aussie carry legal, and to see if it can be done.
**Mods: ** Added a SOG saw where the blade used to be
**Links: ** /post/1460541Pete
Nice... did you have to do anything to the saw to make it fit (drilling, grinding/filing)?
-
G'Day
Tool Name: A Workers Flair
**Basis: ** Leatherman Flair
**Aim: ** To add a file where the cork screw used to be. The tool had a broken cork screw and I had an idea to fill the gap with a PST II file. Same thickness and length was not a problem.
**Mods: ** Added a PST II file into the space where the cork screw is on a Leatherman Flair
**Links: ** /post/995199Pete
-
@Dutch_Tooler said:
Nice... did you have to do anything to the saw to make it fit (drilling, grinding/filing)?Thanks,
Yes I had to sand some of the top and the bottom to enable the tool to close completely. About 1,5mm from the bottom and 1mm from the top. The pivot hole is the same as the Leatherman tools. That was it.
Pete
-
Last one.

Tool Name: Leatherman LBT (Lunch Box Tool)
Basis: Chassis is Leatherman PST, inside tools are a combination of the Leatherman PST, PST II and Flair
**Aim: ** To build a Leatherman that I can prepare and eat lunch with.
**Mods: ** I added a pate knife and a cocktail fork from a Flair into a PST chassis to eat lunch with. Added the PST blade to prepare lunch with and then filled the gaps with a scissors, can opener and some screw drivers.
**Links: ** /post/683928Cheers, Pete
-
Nice, thanks Pete

-
Nice ones Pete !

-
Tool Name: Leatherman Rebar / Diamond file mod
Basis: Chassis is Leatherman Rebar, file from a LM Wave or PST II
Aim: To add a Diamond file to the Rebar
Mods: Use a Wave file and re-profile to fit Rebar later tried a PST file as proof of concept
Links:/post/1309095
DSC09262_zpsubsxdi0b by SteveC, on Flickr

PST II file
DSC09622_zpsjbsejimp by SteveC, on Flickr
DSC09630_zps34macmvk by SteveC, on Flickr -
-
Great idea for a thread DT

So many great mods so far

I will try and add to this one as well and would love to see even more members do the same

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login