Can Opener Comparison
-
Excellent testing RM

-
Hunter and Bantam have the same can opener. Leverage might be a factor though
It's the same one? I thought the Hunter had a larger one.

You could be right. I'll take side by side pics when I get home
-
Excellent write up and investigation

You have to wonder at some of the cheaper companies including a tool that can't even be used!

-
Awesome comparisons RP...

Forgot if I tried to use the LM/Wenger can opener design, they cut in clockwise/backwards motion right? As opposed to the forward motion of Vic’s?
-
Great review, pics and work on this RP
Stuff like this gets overlooked sometimes and I miss threads like this completly
Glad I found this gem though

-
Thanks guys!

It's been a lot of fun. :D -
@magentus said:
Excellent write up and investigation
You have to wonder at some of the cheaper companies including a tool that can't even be used!

I guess they do not expect their tools to be used by those who buy them.

Not that you can call those cheapos collection pieces. Well, some people do, but still.Even good brands occasionally mess the can opener up. Look at the BuckTool.
-
@jaya_man said:
Awesome comparisons RP...
Forgot if I tried to use the LM/Wenger can opener design, they cut in clockwise/backwards motion right? As opposed to the forward motion of Vic’s?
Yes, Leatherman and Wenger claws are designed to go backwards, aka with the can staying still, you go clockwise as you cut. Or, you spin the can counter-clockwise as you cut.
With Victorinox and other quarter-circles, you go forward, so with the can staying still, you go counter-clockwise. Or, you spin the can clockwise as you cut.You can of course go in the opposite direction to the supposed right way for each design. Not as quick though.
-
-

A few familiar faces. Revisiting the Wenger Highlander and Buck BuckTool, and trying out two more quarter-circles from Victorinox, the Cadet and Farmer.

Note the excellent placement of the can opener on the Swiss Army Knives. And then there's the Buck.

-
**BuckTool **(left-handed)
Seeing how badly they placed the can opener on this, it almost looks like a left-handed can opener. Having used it right-handed, with terrible results, I thought I'd try left-handed.
A bit awkward to use the non-dominant hand, but it worked. Despite the awkwardness, slipping, jamming, and ghost cuts, it eventually worked, and much better than with my right hand.2 points for punching through. It hooks better onto the rim, since it is more to the right of the handle than to the left.
1 for comfort. The handles are nicely rounded, but then again, so is a pencil. It does not mean I can write with my left hand.
1 for not jamming. The nail-nick kept getting caught on the remnants of the edge on the wall of the can.
1 for cutting. Not every push yielded a cut. It kept slipping and jamming, delaying an already frustrating process.
1 for not slipping.
Total: 6

The can opener is commonly placed on the left-most side of the handle, allowing it to hook onto the rim, without having the left corner of the handle getting in the way. Ideally, the only thing touching the can will be the hook, under the rim, and the piercing point on the top of the can, right next to the rim. If a can opener is placed too far to the right of the handle, then the handle will get in the way of the hook, forcing the piercing point away from the rim.
Top: Leatherman Core & Wenger Highlander. Correct placement; the handle does not get in the way.
Bottom: BuckTool with right hand (barely hooking onto the rim) & BuckTool with left hand (not as bad, but I am not left-handed).

Wenger Highlander
Another surprising revisit, the Highlander claimed its place in the 'perfect 10' club. Rather than sinking the entire claw in the can, I was watching the harpoon barb closely, so it would not go past the top and get stuck. It worked wonders. I did not get stuck at all, while cutting consistently and cleanly. Perhaps slightly slower than I would have with a Leatherman claw, but still quick and easy enough not to remove any points. All it takes is to simply not jab the entire claw in the can.2 points for punching through.
2 for comfort.
2 for not jamming.
2 for cutting.
2 for not slipping.
Total: 10

-
Victorinox Farmer
Identical can opener to the one on 91mm models. And identical performance. Nice, thin and properly sharpened edge, great ergonomics. No jamming, and a beautiful cut, with a little bit of slipping. Could it be the polished finish? Is the hook too rounded?
2 points for punching through.
2 for comfort.
2 for not jamming.
2 for cutting.
1 for not slipping.
Total: 9

Victorinox Cadet
The identical design, just shrunk down a little. Surprisingly, this small difference in size worked in its favor, allowing for a consistent, clean cut, with no slipping whatsoever. I managed to stay on the rim of the can for the entirety of the cut. Excellent.2 points for punching through.
2 for comfort.
2 for not jamming.
2 for cutting.
2 for not slipping.
Total: 10

-
could the slipping issue be due to hand size?
-
-
so that theory might hold water
-
And possibly some fruit chunks cooked in it.
-

This time, we are looking at the Leatherman Signal, and two Victorinox 111mm liner-lock models, the Fireman, and the OHO Trekker. We will also be revisiting the Wenger 06 - Mountaineer.


-
Leatherman Signal
The hammer prevents the handles to close with the can opener deployed. You will have to either open one handle, or both. With both handles open it was a bit better in the hand, and given that this is the standard locking claw, found on the Core, Charge, and Rebar, it performed just as well. Easy and consistent cutting, with nothing to be concerned about.2 points for punching through.
1 for comfort.
2 for not jamming.
2 for cutting.
2 for not slipping.
Total: 9

Wenger 06 - Mountaineer
Having identified the cause of Wenger claws getting stuck, I was able to get it to cut with no issues. Watch the edge, do not push the entire length of it past the top of the can, and all will be fine. The blade spine was still a little annoying, but at least it did not get stuck, and the cut was consistent and clean.2 points for punching through.
1 for comfort.
2 for not jamming.
2 for cutting.
2 for not slipping.
Total: 9

-
Victorinox Fireman (liner-lock)
No surprises here. This is the identical can opener that the 91mm and 93mm models use. Very sharp, it cuts very well, and the only issue I seem to have is slipping off the rim now and then. I am definitely getting better with the quarter-circle design, and you cannot argue with how well it cuts.2 points for punching through.
2 for comfort.
2 for not jamming.
2 for cutting.
1 for not slipping.
Total: 9

Victorinox OHO Trekker (liner-lock)
The only difference between this and the Fireman is ergonomics. The blade's thumb-hole that allows for one-handed deployment creates a considerably large hump that digs into my hand. Nothing too major, but the Fireman was slightly better.2 points for punching through.
1 for comfort.
2 for not jamming.
2 for cutting.
1 for not slipping.
Total: 8

-

Next on the list, some can openers we have seen before, on bodies we have not. Victorinox RangerGrip 79 and Hercules, Leatherman Surge and Sideclip.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login