Can Opener Comparison
-
So now that Leatherman has a quarter-circle, all big four brands have a quarter-circle.
I do not know how I feel about this.
The standard LM claw is excellent, why did they go with the quarter-circle for the Free series?
-
Well, you can free space on your Zombie Survival Kit and not include a can opener or use an MT or SAK without one. Because: https://www.youtube.com/watch?v=lhT7VNRFkx4
Nobody needs a can opener when you have pavements!

-

Is the food safe to eat after all that grinding? -
@ddogu said:
Well, you can free space on your Zombie Survival Kit and not include a can opener or use an MT or SAK without one. Because: https://www.youtube.com/watch?v=lhT7VNRFkx4Nobody needs a can opener when you have pavements!

Or alternatively like the resident female savage of the household: "I didn't need a can opener. I just borrowed one of your knives instead". :ahhh I told her she could keep the knife as a gift - no need to return it. She then commented that an unsharp knife with chipped edges wasn't much of a gift..! ::)
-
That’s a different way of opening a can

-
@ReamerPunch said:
As is this.
https://www.youtube.com/watch?v=Uj0hU0uDy9ESuch a good video, very interesting technique! Thanks for sharing!
-
I've never had much luck with the quarter circle forward opening Victorinox over the rear opening LM Claw which I vastly prefer. The Vic keeps jamming up. It's also considerably slower and leaves a more jagged edge inside the can. No doubt I'm doing something wrong but I get no brainer perfect results with the LM. Can anyone point me towards the correct procedure to use the quarter circle more efficiently? Or am I just hamfisted? :D
-
@pomsbz said:
I've never had much luck with the quarter circle forward opening Victorinox over the rear opening LM Claw which I vastly prefer. The Vic keeps jamming up. It's also considerably slower and leaves a more jagged edge inside the can. No doubt I'm doing something wrong but I get no brainer perfect results with the LM. Can anyone point me towards the correct procedure to use the quarter circle more efficiently? Or am I just hamfisted? :DI don't know whether there's a right way to it. I actually use it backwards and it's faster for me, meaning holding it in right hand, I rotate the can counter-clockwise. Have you tried counter-clockwise vs clockwise?
-
@pomsbz said:
I've never had much luck with the quarter circle forward opening Victorinox over the rear opening LM Claw which I vastly prefer. The Vic keeps jamming up. It's also considerably slower and leaves a more jagged edge inside the can. No doubt I'm doing something wrong but I get no brainer perfect results with the LM. Can anyone point me towards the correct procedure to use the quarter circle more efficiently? Or am I just hamfisted? :DI also had some trouble with the Victorinox one at first. I kept slipping off the can, and the edge will be a little jagged until you get good with it.
Check the video I posted above. He shows the regular process starting at 1:11. It is just a matter of getting used to it, and improving your results I think.That is why I prefer the Leatherman claw. There is no learning curve. Perfect easy results every time.
-

I also started playing with the different styles and found the LM claw to be the easiest and most consistent in cutting the tops out of soda cans(a lot of can openers just can't do it at all) and regular cans. I do like having the driver tip on the Vic though. So they kind of even out in a way. :)
-
NexTool Flagship Pro/Xiaomi Huohou
0 points for punching through.
0 for comfort.
0 for not jamming.
-5 for cutting.
-5 for not slipping.
Total: -10
Punching through is difficult. The edge is blunt and the tip is rounded off. The left edge of the hook, the edge that would grab on the rim, is rounded off. On a proper can opener, the hook has a 90° edge, so that the can opener holds onto the lip, which provides the necessary leverage for the tip to pierce. On this, the hook just slips off with the slightest force applied to the edge. It takes a considerable amount of force to pierce, all the while being careful to keep the can opener in place.
This makes the whole process an ordeal. For right-handed use, it was difficult to pierce, and impossible to continue on the initial cut. Left-handed is marginally better, since the right edge of the hook has a 90° edge and holds onto the rim.

Cutting left-handed was difficult and awkward, as I am right-handed. Tracing along is painful, since the cutting edge is more of a breaking edge.

Blunt as it could be, the edge slid along the rim, and there is no piercing point to speak of. I had to constantly adjust positioning, and reached about a quarter of the rim. After many tries to continue cutting/breaking the rim, it would not cut along beyond that point.

It took so much force to cut, that I bent the stop pin that provides retention. Now the can opener has play when deployed. Not a big issue. Why would I deploy the can opener? It cannot open cans. If I want to get a sore hand, and mangle a can, I'll just punch the can.

After five minutes of battling the can with the wrong tool and losing, I switched to the Leatherman Core. Just a few seconds, and I cut easily, painlessly, effortlessly, consistently, and effectively around the rim, never slipping off, going through mangled spots with no issues, until the can was nicely opened.

The Flagship Pro's can opener did not even survive a quarter of one can lid.
Left-handed, since right-handed I could only do a single cut. 
What a joke of an implement. What an insult to release this tool with such a terrible can mangler. Is testing not a part of the development process?
Is it really that difficult to try and open a can before you release it? I tried one can and the stop pin bent. I had not even opened one single can!
The can opener on this tool is a waste of space. Beyond unreliable to open a can. Too bad.
-
Great tests again RP

-
-
26:56 - Flagship can opener vs Roxon Storm can opener.
Note that diezelle has the updated version, with the can opener in the proper position and sharpened properly.- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
Roxon Storm S801 S

This is the updated version of the original Storm. The can opener is now positioned properly, in addition to being sharpened. And it shows. It punched through extremely easily. It lost a point to comfort due to the ruler's 90° edge. It never jammed or slipped off the rim, not even once. It also had to lose a point because, while tracing around the rim is consistent and easy, it leaves behind a sharp edge.
In the original the can opener was too deep in the handle to engage properly on the can's lid. It is therefore unclear whether they imagined the can opener moving forwards, like a quarter-circle, or backwards, like a claw. Seeing how the cutting edge faces forwards, one would think that it would operate like a quarter-circle. It can, but it was much easier to go backwards on the lid.
It is nice to see that Roxon listened to feedback and fixed the can opener. Despite the ruler's edge and the sharp edges you will leave behind, it opens cans just as fast as the best can openers, creates no shrapnel, does not push the lid inwards, and does not slip or jam. Not a bad choice at all, which is good, when you take into account that the tool also has a great cap lifter and corkscrew with leverage arm.
2 points for punching through.
1 for comfort.
2 for not jamming.
1 for cutting.
2 for not slipping.
Total: 8 -
Funky looking can opener

-
Funky and functional.

-
Bibury 21 in 1

A locking quarter-circle, properly positioned to hook on the rim.
Initial piercing was extremely easy. Comfort took a small hit, due to some sharp edges, but nothing we have not seen even with premium multi-tools.
The slotted screwdriver tip acted as a stop, preventing the can opener from sinking in too deep in the lid. As the cutting edge made a cut, the screwdriver tip will meet the lid, signifying that the cutting edge has ran out and it is time to advance to the next cut. This unintentional feature lends itself to cutting consistently, every cut being equal in length.While tracing around the lid is easy, sometimes the rim will bend and you will not be able to continue on a previous cut. It was necessary to pierce ahead and then connect the two cuts. Nothing time consuming or difficult, just an extra little step to get the can opened, if you happen to bend the rim.
The lid was not pushed in the can, and it did not create any shrapnel. Some sharp points were left behind, but otherwise a quick, easy job, with some minor discomfort, no slipping and no jamming. Not a bad choice at all, which is refreshing to see in a budget multi-tool that went with the quarter-circle.

2 points for punching through.
1 for comfort.
2 for not jamming.
1 for cutting.
2 for not slipping.
Total: 8 -
The Bibury multi-tool's can opener did even better when we take into account the promotional photos.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
