Skip to content
Collapse
? [[global:guest]]
Unread Recent
HOME SEARCH PROFILE NOTIFICATIONS 0 MESSAGES 0 BOOKMARKS MEMBERS BADGES
Multitool.Org Forum
MultiTool.org • Community Header Space • Watch This Space

My small adventure into 58mm SAK modding!

Scheduled Pinned Locked Moved The Mod Squad
296 Posts 1 Posters 146.7k Views
  1. Home
  2. Tool Talk
  3. The Mod Squad
  4. My small adventure into 58mm SAK modding!
My small adventure into 58mm SAK modding!
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • pfrsantos Offline
    pfrsantos
    Posts: 24,165
    pfrsantos Offline
    pfrsantos
    wrote on last edited by
    #136 Quote Reply

      @PTRSAK said:

      @pfrsantos said:

      @rickinFL said:

      NICE. Ti tweezers would be over the top.

      <u>Skip that! Ti toothpick, that would be awesome!!!</u>

      :drool:

      Amazing piece! :salute: :tu:

      More useful for digging out splinters than picking teeth. in fact it's **too sharp for me to be putting in **my mouth...

      Thats not what she said...

      :rofl: :rofl: :rofl: :rofl:

      1 Reply Last reply
      • Syph007 Offline
        Syph007
        Global Moderators
        Posts: 9,842
        Syph007 Offline
        Syph007
        Global Moderators
        wrote on last edited by
        #137 Quote Reply

          I had someone wanting an alox minichamp with usb so I gave it a go. My first peen job on 58 alox and it turned out ok. I for sure still prefer the screw methods though. :D

          1 Reply Last reply
          • bmot Offline
            bmot
            Posts: 4,468
            bmot Offline
            bmot
            wrote on last edited by
            #138 Quote Reply

              Nice work :)

              So, how are you on the pliers in a 58mm mod? :pok:

              1 Reply Last reply
              • Syph007 Offline
                Syph007
                Global Moderators
                Posts: 9,842
                Syph007 Offline
                Syph007
                Global Moderators
                wrote on last edited by
                #139 Quote Reply

                  @bmot said:
                  Nice work :)

                  So, how are you on the pliers in a 58mm mod? :pok:

                  Its still waiting its turn for work. :D

                  1 Reply Last reply
                  • Etherealicer Offline
                    Etherealicer
                    Admin Team
                    Posts: 12,034
                    Etherealicer Offline
                    Etherealicer
                    Admin Team
                    wrote on last edited by
                    #140 Quote Reply

                      @bmot said:
                      Nice work :)

                      So, how are you on the pliers in a 58mm mod? :pok:

                      +1 on both :cheers:

                      1 Reply Last reply
                      • crackout Offline
                        crackout
                        Posts: 864
                        crackout Offline
                        crackout
                        wrote on last edited by crackout
                        #141 Quote Reply

                          I'm glad you used the spring keyring hole. The one on the plastic flipper is just awful.

                          Did you get all pin heads to end up the same diameter? That's the tricky part when doing 58mm.

                          Edit: 666th post!

                          1 Reply Last reply
                          • Syph007 Offline
                            Syph007
                            Global Moderators
                            Posts: 9,842
                            Syph007 Offline
                            Syph007
                            Global Moderators
                            wrote on last edited by Syph007
                            #142 Quote Reply

                              I have a bunch of requests in the queue for Ti minichamps and ramblers so I decided to try to build 4 at once to speed things along.

                              I took some pics of the Ti sandwiches during the process. I never could have done this without the milling machine. Ti is a royal pain to work with, but so nice when finished. :D

                              It mills very nicely though so thats my prefered way to cut it. I use a 1/8 milling bit to cut the sheets into strips, and then into rectangles.

                              1 Reply Last reply
                              • enki_ck Offline
                                enki_ck
                                Global Moderators
                                Posts: 20,936
                                enki_ck Offline
                                enki_ck
                                Global Moderators
                                wrote on last edited by
                                #143 Quote Reply

                                  Syph007 58mm assembly line. :ahhh

                                  Looking good. :tu:

                                  1 Reply Last reply
                                  • Syph007 Offline
                                    Syph007
                                    Global Moderators
                                    Posts: 9,842
                                    Syph007 Offline
                                    Syph007
                                    Global Moderators
                                    wrote on last edited by
                                    #144 Quote Reply

                                      I asked my waterjet guy about doing a run of 58 parts to be able to make a buch, but those small holes are too small to waterjet, so doing them this way is still going to be the best until I finish the CNC conversion, then I can have a tool spot the holes instead of using liners to get them drilled just right.

                                      1 Reply Last reply
                                      • bmot Offline
                                        bmot
                                        Posts: 4,468
                                        bmot Offline
                                        bmot
                                        wrote on last edited by
                                        #145 Quote Reply

                                          So, how are you doing on the pliers? :angel: :whistle: :whistle:

                                          (Am I being too impatient? :angel: :angel: )

                                          1 Reply Last reply
                                          • Syph007 Offline
                                            Syph007
                                            Global Moderators
                                            Posts: 9,842
                                            Syph007 Offline
                                            Syph007
                                            Global Moderators
                                            wrote on last edited by
                                            #146 Quote Reply

                                              @bmot said:
                                              So, how are you doing on the pliers? :angel: :whistle: :whistle:

                                              (Am I being too impatient? :angel: :angel: )

                                              Changed gears on that one, going with a much simpler way to lock the pliers closed. I'll have pics of that in a bit. The sliding thing was way too complicated and well it just got out of hand. For the purpose of simplicity I got a better idea to just use a small thick O ring anchored into the SAK and then locked into a groove on the pliers handle to hold it down.

                                              Sometimes simple is just a better idea.

                                              1 Reply Last reply
                                              • neillcurrie Offline
                                                neillcurrie
                                                Posts: 860
                                                neillcurrie Offline
                                                neillcurrie
                                                wrote on last edited by
                                                #147 Quote Reply

                                                  Re: galling of dissimilar metals.

                                                  Galling is only a serious problem when the dissimilar parts are in close contact, and under pressure. Think of a Ti screw tightened into a steel tapped hole, or something similar.
                                                  I doubt a 58mm SAK would need preventative measures to prevent galling, as the loads are not high enough (possible exception being the assembly screws/pins), but there is a preparation that helps prevent galling, even when the loads are high. There's an anti-seizure "lubricant" called Ti-Prep, made by Finish Line. I used it quite a bit when I was into lightweight bicycles with Ti componentry and threading.......never had a thread seize on me.
                                                  I checked downstairs, I still have most of a syringe-full left.

                                                  1 Reply Last reply
                                                  • Syph007 Offline
                                                    Syph007
                                                    Global Moderators
                                                    Posts: 9,842
                                                    Syph007 Offline
                                                    Syph007
                                                    Global Moderators
                                                    wrote on last edited by
                                                    #148 Quote Reply

                                                      @neillcurrie said:
                                                      Re: galling of dissimilar metals.

                                                      Galling is only a serious problem when the dissimilar parts are in close contact, and under pressure. Think of a Ti screw tightened into a steel tapped hole, or something similar.
                                                      I doubt a 58mm SAK would need preventative measures to prevent galling, as the loads are not high enough (possible exception being the assembly screws/pins), but there is a preparation that helps prevent galling, even when the loads are high. There's an anti-seizure "lubricant" called Ti-Prep, made by Finish Line. I used it quite a bit when I was into lightweight bicycles with Ti componentry and threading.......never had a thread seize on me.
                                                      I checked downstairs, I still have most of a syringe-full left.

                                                      When I assembled the first Ti minichamp I did, the tools were pretty sticky and they would get a gouged round groove on all the tools. The carbidizer takes only minutes to use to coat the friction surfaces so thats been a fine solution. It was a really bad problem on the 93mm Ti ones I did, so much so that the tools would not even move freely at all. The first couple I would use

                                                      I also made a Ti tool and what I did on that was to carbidize the spring itself and that let the Ti pivot move freely.

                                                      The one trick though about doing the carbide layer deposit is that it goes does a bit rough, but I wet sand it with 800 grit and its silky smooth.

                                                      1 Reply Last reply
                                                      • neillcurrie Offline
                                                        neillcurrie
                                                        Posts: 860
                                                        neillcurrie Offline
                                                        neillcurrie
                                                        wrote on last edited by
                                                        #149 Quote Reply

                                                          @Syph007 said:

                                                          @neillcurrie said:

                                                          Re: galling of dissimilar metals.

                                                          Galling is only a serious problem when the dissimilar parts are in close contact, and under pressure. Think of a Ti screw tightened into a steel tapped hole, or something similar.
                                                          I doubt a 58mm SAK would need preventative measures to prevent galling, as the loads are not high enough (possible exception being the assembly screws/pins), but there is a preparation that helps prevent galling, even when the loads are high. There's an anti-seizure "lubricant" called Ti-Prep, made by Finish Line. I used it quite a bit when I was into lightweight bicycles with Ti componentry and threading.......never had a thread seize on me.
                                                          I checked downstairs, I still have most of a syringe-full left.

                                                          When I assembled the first Ti minichamp I did, the tools were pretty sticky and they would get a gouged round groove on all the tools. The carbidizer takes only minutes to use to coat the friction surfaces so thats been a fine solution. It was a really bad problem on the 93mm Ti ones I did, so much so that the tools would not even move freely at all. The first couple I would use

                                                          I also made a Ti tool and what I did on that was to carbidize the spring itself and that let the Ti pivot move freely.

                                                          The one trick though about doing the carbide layer deposit is that it goes does a bit rough, but I wet sand it with 800 grit and its silky smooth.

                                                          Yes, I had forgotten that in my case galling was seldom an issue, as despite the compressive loads on most bicycle parts, the parts seldom actually rotate or move over each other. The parts that do move are usually non-Ti bearings or hardened steel (the chain, sprockets, chainrings).
                                                          I'm sure the Carbidizer solves the problem...........and you have the machine already, so good to go!

                                                          1 Reply Last reply
                                                          • Syph007 Offline
                                                            Syph007
                                                            Global Moderators
                                                            Posts: 9,842
                                                            Syph007 Offline
                                                            Syph007
                                                            Global Moderators
                                                            wrote on last edited by Syph007
                                                            #150 Quote Reply

                                                              Well I spent awhile cutting out Ti blanks for 58 mods the other day and figured I'd like to try texturing one. It turned out fine, but not the smoothest finish. I really need flood coolant and to play with the speeds to see what works best. I'll still build this into a Ti rambler to see how it looks though as the front scale.

                                                              Its very grippy thats for sure. Looks a little better in person since its a pretty small part.

                                                              IMG_4388.JPG

                                                              IMG_4393.JPG

                                                              1 Reply Last reply
                                                              • WWW Offline
                                                                WWW
                                                                Posts: 1,061
                                                                WWW Offline
                                                                WWW
                                                                wrote on last edited by
                                                                #151 Quote Reply

                                                                  @Syph007 said:
                                                                  Well I spent awhile cutting out Ti blanks for 58 mods the other day and figured I'd like to try texturing one. It turned out fine, but not the smoothest finish. I really need flood coolant and to play with the speeds to see what works best. I'll still build this into a Ti rambler to see how it looks though as the front scale.

                                                                  Its very grippy thats for sure. Looks a little better in person since its a pretty small part.

                                                                  That is awesome Syph!! I see good great things in your the future!!

                                                                  Wouldn't a MQL mist work well for cooling?

                                                                  1 Reply Last reply
                                                                  • Glofindel Offline
                                                                    Glofindel
                                                                    Posts: 352
                                                                    Glofindel Offline
                                                                    Glofindel
                                                                    wrote on last edited by
                                                                    #152 Quote Reply

                                                                      @Syph007 said:
                                                                      Well I spent awhile cutting out Ti blanks for 58 mods the other day and figured I'd like to try texturing one. It turned out fine, but not the smoothest finish. I really need flood coolant and to play with the speeds to see what works best. I'll still build this into a Ti rambler to see how it looks though as the front scale.

                                                                      Its very grippy thats for sure. Looks a little better in person since its a pretty small part.

                                                                      That's really cool.

                                                                      Sent from my HTC One X using Tapatalk

                                                                      1 Reply Last reply
                                                                      • Syph007 Offline
                                                                        Syph007
                                                                        Global Moderators
                                                                        Posts: 9,842
                                                                        Syph007 Offline
                                                                        Syph007
                                                                        Global Moderators
                                                                        wrote on last edited by Syph007
                                                                        #153 Quote Reply

                                                                          I'm finalizing a Ti 58 today that had some options I havent done before. One was the Ti anodized liners.

                                                                          The other was to have the awl from a 91mm replace the cuticle pusher / ruler layer.

                                                                          The awl actually fits really well. I filled the original 2.5mm hole with brass and re-drilled a 1/16th inch hole for the right spot for a 58mm hole. In this super up close pic you can see what I mean.

                                                                          This is just a test setup to see if the awl works and it does. Snap is perfect. The only other thing it needed was a very very did I say very, tiny washer that is 0.010" thick. That was not fun to make. I drilled a 1/16th inch hole in some sheet stock, and then by hand and with needle nose pliers turned it into a round washer.

                                                                          The Ti scales for this one also spent the night in my vibratory tumbler so they are a matte grey color now. More pics later today when I do the assembly.

                                                                          Cheers :salute:

                                                                          1 Reply Last reply
                                                                          • Glofindel Offline
                                                                            Glofindel
                                                                            Posts: 352
                                                                            Glofindel Offline
                                                                            Glofindel
                                                                            wrote on last edited by
                                                                            #154 Quote Reply

                                                                              Washer on 58mm ? This is top level modding.

                                                                              Sent from my HTC One X using Tapatalk

                                                                              1 Reply Last reply
                                                                              • Chaka Offline
                                                                                Chaka
                                                                                Posts: 186
                                                                                Chaka Offline
                                                                                Chaka
                                                                                wrote on last edited by Chaka
                                                                                #155 Quote Reply

                                                                                  WOW... just did something similar... since I couldn't find the cotton picker/orange peeler I added the awl from a 91mm

                                                                                  and here you can see the tiny brass washer...

                                                                                  I didn't round the tang or filled the original hole with brass. Great work Syph... :)

                                                                                  1 Reply Last reply

                                                                                  Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                                                                  Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                                                                  With your input, this post could be even better 💗

                                                                                  Register Login

                                                                                  • 1
                                                                                  • 2
                                                                                  • 6
                                                                                  • 7
                                                                                  • 8
                                                                                  • 9
                                                                                  • 10
                                                                                  • 14
                                                                                  • 15
                                                                                  1. Home
                                                                                  2. Tool Talk
                                                                                  3. The Mod Squad
                                                                                  4. My small adventure into 58mm SAK modding!
                                                                                  Reply
                                                                                  • Reply as topic
                                                                                  Log in to reply
                                                                                  COMMUNITY LINKS
                                                                                  EDC-TV SAKWiki GearFeed SAKSelector
                                                                                  Operational Funds

                                                                                  Help us keep the Unworkable working!

                                                                                  Make A Donation
                                                                                  November Goal: $300.00
                                                                                  Due Date: Nov 30
                                                                                  Total Receipts: $0.00
                                                                                  Below Goal: $300.00
                                                                                  0% funded
                                                                                  • Login

                                                                                  • Don't have an account? Register

                                                                                  • Login or register to search.
                                                                                  • First post
                                                                                    Last post
                                                                                  0